TY  - JOUR
VL  - 10
A1  - Khan, R.
A1  - Ya, H.H.
A1  - Pao, W.
A1  - Abdullah, M.Z.B.
A1  - Dzubir, F.A.
JF  - Metals
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85085093503&doi=10.3390%2fmet10050626&partnerID=40&md5=cc381406263fae6fcd1075b3610b1cac
PB  - MDPI AG
SN  - 20754701
Y1  - 2020///
ID  - scholars13188
TI  - Influence of sand fines transport velocity on erosion-corrosion phenomena of carbon steel 90-degree elbow
N2  - Erosion-corrosion is an ineluctable flow assurance problem confronted in hydrocarbon transportation and production systems. In this work, the effect of sand fines velocity on the erosion-corrosion behavior of AISI 1018 carbon steel long radius 90° elbows was experimentally and numerically investigated for liquid-solid flow conditions. Experiments were effectuated for sand fines of mean diameter 50 µm circulated in a flow loop with three different velocities (0.5, 1 and 2 m/s). To elucidate the erosion-corrosion mechanism and degradation rate, the material loss analysis, multilayer paint modeling (MPM) and microscopic imaging technique were employed, with computational fluid dynamics (CFD) and discrete phase modeling (DPM) also capacitating to evaluate the erosion distribution. It was perceived that increasing slurry velocity significantly changes the particle-wall impaction mechanism, leading to an increase in material degradation in the elbow bottom section up to 2 times in comparison to the low transport velocity. The erosion scars and pits development at the elbows internal surface was found to govern the wear mechanism in the carbon steel and made downstream section susceptible to erosion and corrosion. The material removal mechanisms were ascertained to change from cutting to pitting and plastic deformation with an increase of sand fines transportation velocity from 0.5 m/s to 2 m/s. © 2020 by the authors.
N1  - cited By 9
IS  - 5
AV  - none
ER  -