<> "The repository administrator has not yet configured an RDF license."^^ . <> . . . "Investigation of fibers reinforced engineered cementitious composites properties using quartz powder"^^ . "In relation to the use of retrofit materials on damaged constructions, application on earthquake-resistant buildings, and for the strengthening and rehabilitation on weakened regions, there is a need for a more superior material than concrete. Application sites include beam-column joints, corbels, link-slabs, deep beams, support regions and dapped-end areas. Fiber reinforced engineered cementitious composites (FR-ECC) can address this issue, because FR-ECC is one of the composite materials that has high strength, ductility and durability. In order to develop FR-ECC, this study was done to investigate the effect of adding quartz powder on the compressive strength capacity and properties of FR-ECC through the use of polyvinyl alcohol (PVA) and steel fibers. The volume fraction of fiber was set to 0-2. To support the friendly environment, FR-ECC uses by-product materials such as fly ash and silica fume, with a cement content less than 600 kg/m3. In terms of the experimental investigation on FR-ECC, this work conducted the fresh property tests showing that PVA fibers have quite an influence on ECC workability, due to their hydrophilic behavior. By adjusting the superplasticizer (SP) content, the consistency and high workability of the ECC mixes have been achieved and maintained. The test results indicated that the PVA and steel fibers-based ECC mixes can be classified as self-compacting composites and high early compressive strength composites. Significantly, addition of quartz powder into the ECC mixes increased the compressive strength ratio of the ECC samples up to 1.0747. Furthermore, the steel fiber-based ECC samples exhibited greater compressive strength than the PVA fibers-based ECC samples with the strength ratio of 1.1760. Due to effect of the pozzolanic reaction, the fibers dispersion and orientation in the fresh ECC mixes, so that the cementitious matrices provided the high strength on the FR-ECC samples. During the compression loading, the bulging effect always occurred before the failures of the fibers-based ECC samples. No spalling occurred at the time of rupture and the collapse occurred slowly. Thus, FR-ECC has provided unique characteristics, which will reduce the high cost of maintenance. © 2020 by the authors."^^ . "2020" . . "13" . "11" . . "MDPI AG"^^ . . . "Materials"^^ . . . "19961944" . . . . . . . . . . . . . . . . . . . "K.U."^^ . "Danyaro"^^ . "K.U. Danyaro"^^ . . "B.S."^^ . "Mohammed"^^ . "B.S. Mohammed"^^ . . "M."^^ . "Aswin"^^ . "M. Aswin"^^ . . "M.S."^^ . "Liew"^^ . "M.S. Liew"^^ . . "A.M."^^ . "Al-Yacouby"^^ . "A.M. Al-Yacouby"^^ . . . . . "HTML Summary of #13093 \n\nInvestigation of fibers reinforced engineered cementitious composites properties using quartz powder\n\n" . "text/html" . .