eprintid: 13034
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/30/34
datestamp: 2023-11-10 03:27:35
lastmod: 2023-11-10 03:27:35
status_changed: 2023-11-10 01:50:11
type: conference_item
metadata_visibility: show
creators_name: Arshad, H.
creators_name: Sulaiman, S.A.
creators_name: Hussain, Z.
creators_name: Moni, M.N.Z.
title: Effect of reaction time and microwave power on coil temperature during microwave-metal interaction pyrolysis of plastics
ispublished: pub
note: cited By 5; Conference of 5th UTP-UMP-UAF Symposium on Energy Systems 2019, SES 2019 ; Conference Date: 1 October 2019 Through 2 October 2019; Conference Code:161025
abstract: Rapid rise in production of plastic waste has posed a threat to environment due to its nonbiodegradable nature. In recent years, microwave assisted pyrolysis of plastic waste has emerged as a promising solution toward reduction of waste and recovery of value-Added products and fuels. Previous works on microwave-metal interaction pyrolysis estimated only the peak value of coil temperature at a constant microwave power without monitoring complete reaction. The current study was directed toward investigating the effect of reaction time and variable microwave power on the coil temperature during microwave-metal interaction pyrolysis of plastics. The experiment was performed on individual plastics PS (polystyrene), PP (polypropylene) and LDPE (low density polyethylene) for comparative analysis. Pyrolysis was carried out for a reaction time of 30 minutes at different values of microwave power in the range of 500-2500 W. Type K thermocouple was used to monitor temperature of metal coil. Fluctuation in temperature of coil was found to be a consequence of interaction of coil and thermocouple with the microwaves. Maximum heating rate was observed in the first 5 minutes of microwave exposure. The slopes of average temperature versus microwave power were found to be nearly equal estimated as: PS = 0.24 °C/W, PP = 0.20 °C/W, LDPE = 0.18 °C/W, which indicated consistency in heating process for each plastic, achieved by the current set-up. Further, it was inferred that nature of plastic pyrolyzed had insignificant influence on coil temperature due to absence of direct contact between plastic and the coil. © 2020 Published under licence by IOP Publishing Ltd.
date: 2020
publisher: Institute of Physics Publishing
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85087090846&doi=10.1088%2f1757-899X%2f863%2f1%2f012007&partnerID=40&md5=c920db8c669ce31c026f93e2922fcb1f
id_number: 10.1088/1757-899X/863/1/012007
full_text_status: none
publication: IOP Conference Series: Materials Science and Engineering
volume: 863
number: 1
refereed: TRUE
issn: 17578981
citation:   Arshad, H. and Sulaiman, S.A. and Hussain, Z. and Moni, M.N.Z.  (2020) Effect of reaction time and microwave power on coil temperature during microwave-metal interaction pyrolysis of plastics.  In: UNSPECIFIED.