eprintid: 13028
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/30/28
datestamp: 2023-11-10 03:27:35
lastmod: 2023-11-10 03:27:35
status_changed: 2023-11-10 01:50:10
type: conference_item
metadata_visibility: show
creators_name: Usman, A.
creators_name: Sutanto, M.H.
creators_name: Napiah, M.
creators_name: Zoorob, S.E.
creators_name: Khan, M.I.
creators_name: Ibrahim, M.B.
title: Application of gamma irradiation on Polyethylene Terephthalate (PET) for use in asphaltic concrete mixtures as aggregates replacement
ispublished: pub
keywords: Aggregates; Aliphatic compounds; Asphalt concrete; Biodegradable polymers; Concrete aggregates; Concrete mixtures; Gamma rays; Irradiation; Mixtures; Municipal solid waste; Nanocrystalline materials; Polyethylene terephthalates; Polyethylenes; Sustainable development, Engineering properties; Equal sizes; Gamma irradiation; Marshall stability; Optimum bitumen content; Polyester materials; Polyethylene terephthalates (PET); Semi-crystalline thermoplastic polymers, Plastic bottles
note: cited By 5; Conference of 5th International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2019 ; Conference Date: 19 December 2019 Through 20 December 2019; Conference Code:161067
abstract: Polyethylene Terephthalate (PET) is one of the most commonly available kinds of plastic present in the municipal solid waste and it is a non-biodegradable semi-crystalline thermoplastic polymer, studied as polyester material. This paper intends to assess impacts of using PET (regular and irradiated) as aggregate that would replace by volume of equal size (10.00-5.00mm) in asphalt blend on the engineering properties of dense graded asphaltic concrete. The volumetric and mechanical properties of the blends incorporating different percent of PET (0, 5, 10, 15 and 20) were determined. In all mixtures, 5.0 optimum bitumen content was utilized. The outcome revealed that aggregate substitution of 10 (equivalent to 2.4 by weight of total mix) with irradiated PET result in optimum Marshall Stability and flow value of 3.6mm. It also showed that mixes with irradiated PET at 100kGy radiation dose have Marshall Stability values higher than mixes with same contents of regular PET. The finding also shows that the addition of PET and utilization of gamma radiation has a critical constructive outcome on the properties of asphalt concrete mixes as the stability increases for mixes with irradiated PET when compared with mixes with regular PET (RPET). © 2020 IOP Publishing Ltd. All rights reserved.
date: 2020
publisher: Institute of Physics Publishing
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85086886620&doi=10.1088%2f1755-1315%2f498%2f1%2f012008&partnerID=40&md5=ede18607bbbfe1477b106f926144ad40
id_number: 10.1088/1755-1315/498/1/012008
full_text_status: none
publication: IOP Conference Series: Earth and Environmental Science
volume: 498
number: 1
refereed: TRUE
issn: 17551307
citation:   Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Khan, M.I. and Ibrahim, M.B.  (2020) Application of gamma irradiation on Polyethylene Terephthalate (PET) for use in asphaltic concrete mixtures as aggregates replacement.  In: UNSPECIFIED.