relation: https://khub.utp.edu.my/scholars/12744/
title: Performance optimization of a hybrid PV/T solar system using Soybean oil/MXene nanofluids as A new class of heat transfer fluids
creator: Rubbi, F.
creator: Habib, K.
creator: Saidur, R.
creator: Aslfattahi, N.
creator: Yahya, S.M.
creator: Das, L.
description: In this research, a new class of nanofluid is successfully formulated from Soybean oil and MXene (Ti3C2) particles to implement as working fluid on a hybrid photovoltaic-thermal (PV/T) solar collector for performance optimization. This study emphasizes on the preparation of the Soybean oil/MXene (SO/Ti3C2) nanofluid, optical and thermal characterization of the nanofluid including suspension stability. The SO/Ti3C2 nanofluid samples are formulated suspending two-dimensional (2D) MXene particles at 0.025�0.125 wt concentrations into pure Soybean oil. SEM, UV�vis, FTIR and TGA analysis are performed for morphology, optical and thermal stability characterization respectively. Achieved thermal conductivity results of SO/Ti3C2 nanofluid for 0.125 wt of Ti3C2 exhibited 60.82 enhancement at 55 °C compared to pure Soybean oil. The specific heat capacity (cp) of formulated nanofluids is measured employing a differential scanning calorimeter (DSC). Maximum cp augmentation is found to be 24.49 at 0.125 wt loading of Ti3C2 in the base oil. Numerical implementation of the prepared SO/Ti3C2 nanofluids on PV/T is performed using COMSOL Multiphysics software resulted noteworthy improvement compared to conventional water, Alumina/water and MXene/palm oil nanofluids as working fluid. Overall thermal effectiveness of the PV/T system is achieved 84.25 using SO/Ti3C2 nanofluids at 0.07 kg/s mass flow rate. Furthermore, employing the nanofluids electrical output of the PV/T is improved by 15.44 in comparison with water/alumina nanofluids at an irradiance of 1000 W/m2 and mass flow rate of 0.07 kg/s. The stated findings indicate overall effectiveness of the Soybean oil based MXene nanofluids over conventional fluids used for cooling purpose in the PV/T collector. © 2020 International Solar Energy Society
publisher: Elsevier Ltd
date: 2020
type: Article
type: PeerReviewed
identifier:   Rubbi, F. and Habib, K. and Saidur, R. and Aslfattahi, N. and Yahya, S.M. and Das, L.  (2020) Performance optimization of a hybrid PV/T solar system using Soybean oil/MXene nanofluids as A new class of heat transfer fluids.  Solar Energy, 208.  pp. 124-138.  ISSN 0038092X     
relation: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85088992459&doi=10.1016%2fj.solener.2020.07.060&partnerID=40&md5=559588a0544f92e263fdf5560b2fdfb6
relation: 10.1016/j.solener.2020.07.060
identifier: 10.1016/j.solener.2020.07.060