eprintid: 12703
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/27/03
datestamp: 2023-11-10 03:27:15
lastmod: 2023-11-10 03:27:15
status_changed: 2023-11-10 01:49:19
type: article
metadata_visibility: show
creators_name: Ismail, N.I.
creators_name: Naz, M.Y.
creators_name: Shukrullah, S.
creators_name: Sulaiman, S.A.
title: Mechanical earth modeling and sand onset production prediction for Well X in Malay Basin
ispublished: pub
keywords: Boreholes; Forecasting; Oil field equipment; Rock mechanics; Rocks; Sand; Well logging, Critical condition; Mechanical earth models; Mohr-Coulomb failure criterion; Preventive action; Production prediction; Rock failures; Sand production; Wellbore pressure, Well testing
note: cited By 3
abstract: This study is aimed at testing Mechanical earth modeling (MEM) and Sand onset production prediction (SOP) models using well log and core data to estimate the mechanical properties of the rock, in-situ stresses and the critical conditions at which the rock failure may occur. New numerical models were developed to predict the onset of sand production for Well X. The outputs from MEM were coupled with the Mohr Coulomb failure criterion to calculate the critical wellbore pressure of the well and consequently the depth of the rock at which failure may occur. The results showed that at depth of 1061.68�1098.10 m, the calculated critical wellbore pressures were negatives, which reveal low possibility of sand production. However, at a depth of 1098.25�2230.89 m, the calculated critical wellbore pressures were positives. In this depth range, there was high possibility of rock failure. In conclusion, based on the findings, Well X may produce sand at depth deeper than 1100 m. Therefore, mitigation and preventive actions should be planned for Well X to handle and manage the possible sand production from the identified interval. © 2020, The Author(s).
date: 2020
publisher: Springer
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85086717729&doi=10.1007%2fs13202-020-00932-2&partnerID=40&md5=9831f990f9bd821ad043330c2204ed69
id_number: 10.1007/s13202-020-00932-2
full_text_status: none
publication: Journal of Petroleum Exploration and Production Technology
volume: 10
number: 7
pagerange: 2753-2758
refereed: TRUE
issn: 21900558
citation:   Ismail, N.I. and Naz, M.Y. and Shukrullah, S. and Sulaiman, S.A.  (2020) Mechanical earth modeling and sand onset production prediction for Well X in Malay Basin.  Journal of Petroleum Exploration and Production Technology, 10 (7).  pp. 2753-2758.  ISSN 21900558