TY - JOUR Y1 - 2020/// UR - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85087137178&doi=10.1080%2f10426914.2020.1779945&partnerID=40&md5=e07007c6fdda7424b6f64950f91d9cca N1 - cited By 0 A1 - Ali, M. A1 - Ahmad, F. A1 - Malik, M.R.R. A1 - Niazi, A.R. JF - Materials and Manufacturing Processes VL - 35 N2 - Feâ??50Ni alloy is widely used for soft magnetic applications due to attractive magnetic properties. In this study, Feâ??50Ni soft magnetic alloy was produced by powder injection molding. The influence of sintering parameters was investigated on the density, grain size, and magnetic properties. The injected parts were sintered at 1300â??1375°C for 2â??14 h with subsequent controlled slow cooling. It has found that permeability and magnetic induction improved with increasing sintering time and temperature, whereas the coercivity was reduced significantly. The sintered density and grain size of 98 and 240 µm were obtained in this study. Consequently, excellent magnetic properties of Feâ??50Ni were achieved. The values of magnetic permeability and saturation induction were 50,240 and 1.52 T, respectively. © 2020 Taylor & Francis. SN - 10426914 IS - 14 TI - Fabrication of high magnetic performance Feâ??50Ni alloy by powder injection molding KW - Grain size and shape; Magnetic materials; Magnetic permeability; Magnetism; Powder metallurgy; Sintering KW - Magnetic performance; Powder injection molding; Saturation induction; Sintered density; Sintering parameters; Sintering time; Soft magnetic alloys; Soft magnetics KW - Injection molding ID - scholars12600 EP - 1566 SP - 1557 PB - Bellwether Publishing, Ltd. AV - none ER -