eprintid: 12357
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/23/57
datestamp: 2023-11-10 03:26:54
lastmod: 2023-11-10 03:26:54
status_changed: 2023-11-10 01:48:37
type: article
metadata_visibility: show
creators_name: Al-Fakih, A.
creators_name: Mohammed, B.S.
creators_name: Wahab, M.M.A.
creators_name: Liew, M.S.
creators_name: Mugahed Amran, Y.H.
title: Flexural behavior of rubberized concrete interlocking masonry walls under out-of-plane load
ispublished: pub
keywords: Bending strength; Brick; Compressive strength; Fly ash; Joint prostheses; Masonry construction; Retaining walls; Rubber industry; Rubber products; Walls (structural partitions), Analytical analysis; Displacement response; Flexural behavior; Flexural failure; Industrial by-products; Lateral displacements; Out of plane loads; Partial replacement, Rubberized concrete
note: cited By 29
abstract: Waste and industrial by-products, such as crumb rubber and fly ash, are being utilized as raw materials for making various masonry products. Rubberized concrete interlocking brick (RIB) is a newly developed product incorporated 10 crumb rubber, as a partial replacement for sand, and 56 fly ash, as a partial replacement for cement. The study experimentally emphasized understanding the behavior of masonry walls made of the developed rubberized interlocking bricks under out-of-plane load, with and without precompression load. The compressive strength of the developed loadbearing RIB was 18.4 MPa. The results of flexural strength, moment�curvature relationship, displacement responses, joint opening, and failure modes for masonry walls made of the developed RIB under lateral load parallel to the dry bed joints are discussed. An analytical analysis to predict the cracking flexural load is presented and compared with the experimental results. The results show that by increasing the pre-compression load, flexural strength, and moment capacity of the rubberized interlocking masonry walls increased linearly. The lateral displacement was 10.82, 24.99, and 29.69 mm for masonry walls subjected to a 0, 56, and 112 kN pre-compression loads, respectively. Flexural failure along the width of masonry walls with a course opening at mid-height was the dominant failure mode. It can also be concluded that the theoretical cracking flexural load closely matches the laboratory load. © 2020 Elsevier Ltd
date: 2020
publisher: Elsevier Ltd
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85090117362&doi=10.1016%2fj.conbuildmat.2020.120661&partnerID=40&md5=c65fb2d5bfa7ef80ebb9117c3d0e9446
id_number: 10.1016/j.conbuildmat.2020.120661
full_text_status: none
publication: Construction and Building Materials
volume: 263
refereed: TRUE
issn: 09500618
citation:   Al-Fakih, A. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H.  (2020) Flexural behavior of rubberized concrete interlocking masonry walls under out-of-plane load.  Construction and Building Materials, 263.   ISSN 09500618