eprintid: 1232
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/00/12/32
datestamp: 2023-11-09 15:49:23
lastmod: 2023-11-09 15:49:23
status_changed: 2023-11-09 15:39:16
type: conference_item
metadata_visibility: show
creators_name: Hussain, P.
creators_name: Mamat, O.
creators_name: Mohammad, M.
creators_name: Jaafar, W.M.N.W.
title: Formation of nitrogen-pearlite in the diffusion bonding of sialon to 316L stainless steel
ispublished: pub
note: cited By 2; Conference of International Conference on Advancement of Materials and Nanotechnology, ICAMN 2007 ; Conference Date: 29 May 2007 Through 1 June 2007
abstract: The objective of this study is to investigate the interface reaction and diffusion bonding between 316L stainless steel and sialon. Bonding was carried out in a hot press at 1250°C under the pressure of 15MN/m2 for 1 hour and was cooled slowly in the furnace to prevent the mismatch between the sialon and the steel. Scanning Electron microscopy (SEM) revealed the interdiffusion and intereaction between the steel and the sialon. The elements diffusing into sialon were illustrated by the Energy Dispersive Spectrometer (EDS) analysis where the presence of Fe, Cr, Ni and Mn are significant. The formation of nitrogen pearlite can be described as a result of the reaction between the stainless steel and the silicon nitride component of sialon which release nitrogen. Mechanical behavior of the nitrogen diffused layer was also investigated using microhardness tester and at the reaction layer an increase in hardness was observed. Conclusion can be deduced that the formation of nitrogen pearlite in the stainless steel is quite significant especially on joining sialon to as-received nitrogen-free austenite stainless steel. The formation of nitrogen pearlite could be understood by the diffusion of nitrogen into the stainless steel. Thus, the continuous precipitates form lamellar nitrogen pearlite. © 2010 American Institute of Physics.
date: 2010
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-77953106048&doi=10.1063%2f1.3377798&partnerID=40&md5=4337f31ce6278d881bacf98a9dc1cbcd
id_number: 10.1063/1.3377798
full_text_status: none
publication: AIP Conference Proceedings
volume: 1217
place_of_pub: Langkawi, Kedah
pagerange: 129-133
refereed: TRUE
isbn: 9780735407602
issn: 0094243X
citation:   Hussain, P. and Mamat, O. and Mohammad, M. and Jaafar, W.M.N.W.  (2010) Formation of nitrogen-pearlite in the diffusion bonding of sialon to 316L stainless steel.  In: UNSPECIFIED.