TY  - JOUR
A1  - Ali, E.M.
A1  - Yahaya, N.Z.
A1  - Nallagownden, P.
A1  - Alqasem, B.H.
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85058802342&doi=10.1002%2fmmce.21657&partnerID=40&md5=75f28a7e33897fb1b17f0f7432a04afe
N1  - cited By 9
ID  - scholars12260
N2  - Radio frequency (RF) energy harvesting has experienced a rapid development recently because of the increasing number of RF transmitter sources. This article illustrates a novel analytical model for the voltage multiplier rectifier at 900 MHz. The model proposes a method of deriving the output characteristics of the rectifying circuits in terms of two main parameters; voltage and current. The design consists of seven stages of Dickson voltage multiplier rectifier. A Schottky diode HSMS 285C was used in the design. Equations for the model were developed. These equations were used to extract the values of output voltage and current. A simulation was optimized using advanced design systems. The system was correspondingly fabricated and tested for input power range of 1 Ã? 10â??5-1 Ã? 10â??1 W. Experimental results show that an output voltage of 5.45 V and current of 1.26 Ã? 10â??5 A are achieved at 10 dBm using a 10 kΩ load, achieving an efficiency of 37.82. © 2018 Wiley Periodicals, Inc.
SN  - 10964290
Y1  - 2019///
IS  - 1
TI  - Enhanced Dickson voltage multiplier rectenna by developing analytical model for radio frequency harvesting applications
KW  - Analytical models; Energy harvesting; Frequency multiplying circuits; Radio transmission; Radio waves; Rectennas; Rectifying circuits; Schottky barrier diodes
KW  -  Advanced design system; Output characteristics; Output voltages; Radio frequencies; Radio-frequency energy harvesting; Rectenna; Schottky diodes; Voltage multipliers
KW  -  Electric rectifiers
VL  - 29
PB  - John Wiley and Sons Inc.
JF  - International Journal of RF and Microwave Computer-Aided Engineering
AV  - none
ER  -