relation: https://khub.utp.edu.my/scholars/12260/
title: Enhanced Dickson voltage multiplier rectenna by developing analytical model for radio frequency harvesting applications
creator: Ali, E.M.
creator: Yahaya, N.Z.
creator: Nallagownden, P.
creator: Alqasem, B.H.
description: Radio frequency (RF) energy harvesting has experienced a rapid development recently because of the increasing number of RF transmitter sources. This article illustrates a novel analytical model for the voltage multiplier rectifier at 900 MHz. The model proposes a method of deriving the output characteristics of the rectifying circuits in terms of two main parameters; voltage and current. The design consists of seven stages of Dickson voltage multiplier rectifier. A Schottky diode HSMS 285C was used in the design. Equations for the model were developed. These equations were used to extract the values of output voltage and current. A simulation was optimized using advanced design systems. The system was correspondingly fabricated and tested for input power range of 1 � 10�5-1 � 10�1 W. Experimental results show that an output voltage of 5.45 V and current of 1.26 � 10�5 A are achieved at 10 dBm using a 10 kΩ load, achieving an efficiency of 37.82. © 2018 Wiley Periodicals, Inc.
publisher: John Wiley and Sons Inc.
date: 2019
type: Article
type: PeerReviewed
identifier:   Ali, E.M. and Yahaya, N.Z. and Nallagownden, P. and Alqasem, B.H.  (2019) Enhanced Dickson voltage multiplier rectenna by developing analytical model for radio frequency harvesting applications.  International Journal of RF and Microwave Computer-Aided Engineering, 29 (1).   ISSN 10964290     
relation: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85058802342&doi=10.1002%2fmmce.21657&partnerID=40&md5=75f28a7e33897fb1b17f0f7432a04afe
relation: 10.1002/mmce.21657
identifier: 10.1002/mmce.21657