eprintid: 12029
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/20/29
datestamp: 2023-11-10 03:26:34
lastmod: 2023-11-10 03:26:34
status_changed: 2023-11-10 01:16:43
type: article
metadata_visibility: show
creators_name: Saieed, A.
creators_name: Memon, Z.Q.
creators_name: Tran, M.C.
creators_name: Soon, W.P.K.
title: A multiphase flow loop design for investigating the partial phase separation in a pipe tee
ispublished: pub
note: cited By 2
abstract: This article presents a design and commissioning of a multiphase flow loop, which was developed for scrutinizing the partial phase separation characteristics of pipe Tees. Its length is 9 m and its primary diameter is 0.078 m (3 inches). For the ease of modification, its design was kept modular, so that it could be used for testing various other pipe profiles. To validate this flow loop, the separation of a stratified-wavy flow was tested in a regular diameter ratio pipe Tee, and the gathered results were compared with previously published data. A good agreement was observed between the two data sources, which suggests that this flow loop is suitable for a further experimentation. © Czech Technical University in Prague, 2019.
date: 2019
publisher: Czech Technical University in Prague
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85073391392&doi=10.14311%2fAP.2019.59.0399&partnerID=40&md5=bace166add73bc537ef5fbca9ca451df
id_number: 10.14311/AP.2019.59.0399
full_text_status: none
publication: Acta Polytechnica
volume: 59
number: 4
pagerange: 399-410
refereed: TRUE
issn: 18052363
citation:   Saieed, A. and Memon, Z.Q. and Tran, M.C. and Soon, W.P.K.  (2019) A multiphase flow loop design for investigating the partial phase separation in a pipe tee.  Acta Polytechnica, 59 (4).  pp. 399-410.  ISSN 18052363