TY  - JOUR
IS  - 4
ID  - scholars12029
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85073391392&doi=10.14311%2fAP.2019.59.0399&partnerID=40&md5=bace166add73bc537ef5fbca9ca451df
AV  - none
Y1  - 2019///
N1  - cited By 2
N2  - This article presents a design and commissioning of a multiphase flow loop, which was developed for scrutinizing the partial phase separation characteristics of pipe Tees. Its length is 9 m and its primary diameter is 0.078 m (3 inches). For the ease of modification, its design was kept modular, so that it could be used for testing various other pipe profiles. To validate this flow loop, the separation of a stratified-wavy flow was tested in a regular diameter ratio pipe Tee, and the gathered results were compared with previously published data. A good agreement was observed between the two data sources, which suggests that this flow loop is suitable for a further experimentation. © Czech Technical University in Prague, 2019.
A1  - Saieed, A.
A1  - Memon, Z.Q.
A1  - Tran, M.C.
A1  - Soon, W.P.K.
SP  - 399
EP  - 410
SN  - 18052363
TI  - A multiphase flow loop design for investigating the partial phase separation in a pipe tee
VL  - 59
PB  - Czech Technical University in Prague
JF  - Acta Polytechnica
ER  -