relation: https://khub.utp.edu.my/scholars/11712/
title: Co-pyrolysis of rubberwood sawdust (RWS) and polypropylene (PP) in a fixed bed pyrolyzer
creator: Izzatie, N.I.
creator: Basha, M.H.
creator: Uemura, Y.
creator: Hashim, M.S.M.
creator: Afendi, M.
creator: Mazlan, M.A.F.
description: Co-pyrolysis of rubberwood sawdust (RWS) waste and polypropylene (PP) was carried out at different temperatures (450,500,550, and 600°C) with biomass to plastics ratio 1:1 by using fixed bed drop-type pyrolyzer. The yield of pyrolysis oil has an increasing trend as the temperature increased from 450°C to 550°C. However, the pyrolysis oil yield dropped at a temperature of 600°C. Co-pyrolysis of RWS and PP generated maximum pyrolysis oil with 36.47 wt. at 550°C. The result is compared with the pyrolysis of RWS only without plastics, with the same feedstock, and the maximum pyrolysis oil yield obtained was 33.3 wt.. The water content in pyrolysis oil of co-pyrolysis RWS with PP is lower than RWS only with 54.2 wt. and 62 wt. respectively. Hydrocarbons, acyclic olefin, alkyl, and aromatic groups are the major compound in the pyrolysis oil from the co-pyrolysis process. Carbon monoxide (52.2 vol.) and carbon dioxide (38.2 vol.) are the major gas components. © 2019 Universiti Malaysia Pahang. All rights reserved.
publisher: Universiti Malaysia Pahang
date: 2019
type: Article
type: PeerReviewed
identifier:   Izzatie, N.I. and Basha, M.H. and Uemura, Y. and Hashim, M.S.M. and Afendi, M. and Mazlan, M.A.F.  (2019) Co-pyrolysis of rubberwood sawdust (RWS) and polypropylene (PP) in a fixed bed pyrolyzer.  Journal of Mechanical Engineering and Sciences, 13 (1).  pp. 4636-4647.  ISSN 22894659     
relation: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85065494218&doi=10.15282%2fjmes.13.1.2019.20.0390&partnerID=40&md5=1faa966cfbdbeae9f700a5967cc2f5ab
relation: 10.15282/jmes.13.1.2019.20.0390
identifier: 10.15282/jmes.13.1.2019.20.0390