eprintid: 11318
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/13/18
datestamp: 2023-11-10 03:25:50
lastmod: 2023-11-10 03:25:50
status_changed: 2023-11-10 01:14:58
type: conference_item
metadata_visibility: show
creators_name: Law, D.
creators_name: Mohd Noh, K.A.
creators_name: Md Rafek, A.G.
title: Application of Transient Electromagnetic (TEM) Method for Delineation of Mineralized Fracture Zones
ispublished: pub
keywords: Clay alteration; Data acquisition; Geology; Mineral exploration; Transient analysis, Electrically conductive; Geoelectrical properties; Geological structures; High conductivity; Hydrothermal alterations; Transient electromagnetic methods; Transient electromagnetics; Transmitter coils, Fracture
note: cited By 1; Conference of 1st International Conference on Geoscience, ICoGeS 2018 ; Conference Date: 1 November 2018 Through 2 November 2018; Conference Code:151625
abstract: Fracture zones have always been areas of interest in mineral exploration. These geological structures are often studied and mapped as prospective zones for mineralization through the process of hydrothermal alteration. The transient electromagnetic (TEM) survey has been utilized to delineate the possible mineralized fracture zone of eastern Kuantan, Pahang. 35 single loop TEM soundings were acquired in a scattered manner over a region of high relief terrain, encompassing an area of approximately 5 km2. Data acquisition was conducted using the TerraTEM system by Monex Geoscope, with a 30 m x 30 m wire loop. The wire loop functions both as the transmitter coil and the receiver coil. The TEM responses indicate the presence of 3 electrically conductive zones (A, B and C) which are attributed to possible mineralized fracture regions within the country rock. All three regions record high conductivity readings with values of more than 15 mS/m and have a directional trend of NW-SE orientation. Target A is observed to be 300 m in width (E-W) and extends to 100 m in depth while B and C both have larger dimensions, exceeding 400 m in length (E-W) and up to depths of 150 m. The 3-D model generated from the 1-D soundings of the TEM dataset demonstrates the anomaly patterns that could be caused by the electrically conductive fracture zones within a resistive metasediment country rock. Geoelectrical properties of targets A, B and C may suggest the location of possible mineralized fracture zones within the study area. © 2019 Published under licence by IOP Publishing Ltd.
date: 2019
publisher: Institute of Physics Publishing
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85072647042&doi=10.1088%2f1755-1315%2f279%2f1%2f012038&partnerID=40&md5=336ab12346fbc5f27d9fa2a6491ceca0
id_number: 10.1088/1755-1315/279/1/012038
full_text_status: none
publication: IOP Conference Series: Earth and Environmental Science
volume: 279
number: 1
refereed: TRUE
issn: 17551307
citation:   Law, D. and Mohd Noh, K.A. and Md Rafek, A.G.  (2019) Application of Transient Electromagnetic (TEM) Method for Delineation of Mineralized Fracture Zones.  In: UNSPECIFIED.