eprintid: 11077
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/10/77
datestamp: 2023-11-10 03:25:38
lastmod: 2023-11-10 03:25:38
status_changed: 2023-11-10 01:14:27
type: article
metadata_visibility: show
creators_name: Nor, N.M.
creators_name: Adi Putra, Z.
creators_name: Bilad, M.R.
creators_name: Nordin, N.A.H.M.
creators_name: Wirzal, M.D.H.
creators_name: Abidin, S.A.Z.
creators_name: Daud, W.R.W.
title: Well connection optimization in integrated subsurface and surface facilities: an industrial case study
ispublished: pub
keywords: Gas lifts; Offshore oil well production; Oil wells; Pressure vessels, Downstream pressure; High-pressure vessel; Industrial case study; Oil production; Operating variables; Performance correlation; Superstructure models; Surface facilities, Wellheads
note: cited By 2
abstract: Optimizations of oil productions in current practices have been done separately in both subsurface and surface facilities. This approach might not lead to an optimum state when the whole system is interconnected. In this work, a superstructure model of an existing integrated subsurface and surface facilities was developed and evaluated to maximize the oil productions. In subsurface facilities, well performance data were taken from PROSPER well simulations. Operating variables such as downstream pressures of choke valves and gas lift flowrates, which influence the flow of oil, gas, and water from reservoirs, were considered. Based on these variables, performance correlations of the wells were then developed. On the evaluated surface facility, three pressure levels of vessels on the platform (high-, medium-, and low-pressure vessels) and their current designs were also considered. The optimization result shows that to reach optimum oil production, one well should be connected to the high-pressure vessel, four wells to the medium-pressure vessel, and the rest goes to the low-pressure vessel. Several choke valves and gas lift flowrates also need to be adjusted accordingly. © 2019, The Author(s).
date: 2019
publisher: Springer Verlag
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85065991460&doi=10.1007%2fs13202-019-0678-x&partnerID=40&md5=f3e3b20639ef297d947387d3e89d2ad5
id_number: 10.1007/s13202-019-0678-x
full_text_status: none
publication: Journal of Petroleum Exploration and Production Technology
volume: 9
number: 4
pagerange: 2921-2926
refereed: TRUE
issn: 21900558
citation:   Nor, N.M. and Adi Putra, Z. and Bilad, M.R. and Nordin, N.A.H.M. and Wirzal, M.D.H. and Abidin, S.A.Z. and Daud, W.R.W.  (2019) Well connection optimization in integrated subsurface and surface facilities: an industrial case study.  Journal of Petroleum Exploration and Production Technology, 9 (4).  pp. 2921-2926.  ISSN 21900558