TY  - JOUR
AV  - none
N2  - Abandoned oil wells have a great potential to be converted into geothermal energy extraction wells. However, these wells have low energy conversion rates as compared to conventional geothermal open loop wells. Therefore, increasing the heat transfer is one of the major concerns in the utilization of abandoned oil well for geothermal energy extraction. This study is conducted to evaluate the heat transfer enhancement of a novel well bottom curvature design installed inside the wellbore using a computational fluid dynamics approach. Various well bottom curvature designs were evaluated, along with the effects of working fluid inlet temperature and flow rate. For optimization, Taguchi Statistical Method was adopted to determine the optimum parameter combination and their interactions. From the study, it is found that 0.5 m well bottom curvature is preferred for higher output temperature and heat transfer rate, whereas 0.8 m well bottom curvature is recommended for lowering pressure drop and producing higher CoP. On the other hand, lower injection temperature (288K) and lower injection rate (10 m3/h) produces better overall wellbore performance, except for higher outlet temperature purposes, where a higher injection temperature (298K) is favoured and higher heat transfer rate applications, where a higher injection rate (30 m3/h) is preferred. © 2019
N1  - cited By 19
KW  - Boreholes; Computational fluid dynamics; Curve fitting; Energy conversion; Extraction; Geothermal energy; Heat transfer coefficients; Heat transfer performance; Oil field equipment; Oil wells; Statistical methods; Taguchi methods
KW  -  Bottom curvature; Energy conversion rates; Energy extraction; Heat Transfer enhancement; Heat transfer rate; Injection temperature; Optimum parameters; Outlet temperature
KW  -  Abandoned wells
KW  -  computational fluid dynamics; curvature; design method; energy use; extraction method; geothermal energy; heat transfer; methodology; oil well; optimization; pressure drop; statistical analysis; well technology
ID  - scholars11056
TI  - Optimization of geothermal energy extraction from abandoned oil well with a novel well bottom curvature design utilizing Taguchi method
Y1  - 2019///
SN  - 03605442
PB  - Elsevier Ltd
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85072171650&doi=10.1016%2fj.energy.2019.116098&partnerID=40&md5=084e10e2d4f2c910394ab25a45ab2ff4
JF  - Energy
A1  - Cheng, S.W.Y.
A1  - Kurnia, J.C.
A1  - Ghoreishi-Madiseh, S.A.
A1  - Sasmito, A.P.
VL  - 188
ER  -