eprintid: 10904
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/09/04
datestamp: 2023-11-09 16:37:31
lastmod: 2023-11-09 16:37:31
status_changed: 2023-11-09 16:32:28
type: article
metadata_visibility: show
creators_name: Ismail, A.
creators_name: Awang, M.
creators_name: Rahman, F.A.
creators_name: Baharudin, B.A.
creators_name: Khalid, P.Z.M.
creators_name: Hamid, D.A.
creators_name: Ahmad, K.
title: The mapping of full weld cycle heat profile for friction stir welding pipe butt joints
ispublished: pub
note: cited By 0
abstract: Aluminium alloy 6063 pipe sections were friction stir welded to produce a sound joining. In this present study, the full weld cycle of heat input will be gathered for rotational speed ranging between 1000 and 1600 rpm and travel speed between 3 and 5 mm/s. There will be 5 specimens to be friction stir welded. It was found that, the heat input will be increased with the increment of rotational speed up to 396 °C and decreased with the increment of travel speed with a minimum of 221 °C. These conditions were recorded by utilizing K-type thermocouples and the Signal Express software with a National Instrument model cDAQ-9171 data logger. © Springer International Publishing AG 2018.
date: 2018
publisher: Springer Verlag
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85041735599&doi=10.1007%2f978-3-319-72697-7_38&partnerID=40&md5=6d7b5932b652b92dde10c5519f97d7d7
id_number: 10.1007/978-3-319-72697-7₃₈
full_text_status: none
publication: Advanced Structured Materials
volume: 85
pagerange: 461-467
refereed: TRUE
issn: 18698433
citation:   Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. and Ahmad, K.  (2018) The mapping of full weld cycle heat profile for friction stir welding pipe butt joints.  Advanced Structured Materials, 85.  pp. 461-467.  ISSN 18698433