TY  - JOUR
AV  - none
SP  - 141
TI  - Statistical analysis of the machining parameters in drilling of carbon fibre reinforced plastics (CFRP) composite with various drill types
N1  - cited By 5
PB  - Pleiades journals
SN  - 21954356
EP  - 154
ID  - scholars10860
KW  - Analysis of variance (ANOVA); Carbide tools; Carbides; Carbon fibers; Drills; Elastomers; Glass ceramics; Infill drilling; Quality control
KW  -  Carbon-fiber reinforced plastic composites; Carbon-fibre reinforced plastics; Composite drilling; Drilling characteristics; Feedrate; Fiber-reinforced composite material; Hole quality; Machining parameters; Metallic material; Thrust forces
KW  -  Carbon fiber reinforced plastics
IS  - 978981
N2  - In contrast to the machining of metallic materials, drilling of the fiber reinforced composite materials presented unique challenges as its cutting behavior differs in several aspects. This work presents an analysis to determine the drilling characteristics in carbon fiber reinforced plastics (CFRP) composite using HSS twist drill, HSS brad drill and carbide dagger drill. The study is based on Taguchiâ??s method and analysis of variance (ANOVA). The experiments were conducted to quantify the statistical contributions of the spindle speed and feed rate for those three drills. The results indicated that the feed rate is recognized to make the most significant contribution to the thrust force, which reflects the hole quality and tool wear. In overall, brad drill promoted better hole quality at the exit side. A low thrust force, insignificant hole defect and hence, better drill condition was obtained with this drill at a cutting speed of 800 rpm and feed rate of 0.04 mm/rev. © 2018, Springer Nature Singapore Pte Ltd.
Y1  - 2018///
VL  - 0
JF  - Lecture Notes in Mechanical Engineering
A1  - Othman, A.R.
A1  - Hassan, M.H.
A1  - Abu Bakar, E.
A1  - Othman, W.A.F.W.
UR  - https://www.scopus.com/inward/record.uri?eid=2-s2.0-85046299023&doi=10.1007%2f978-981-10-8788-2_14&partnerID=40&md5=99b8c3940c35b217ebfb189e9e17a315
ER  -