eprintid: 10739
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/07/39
datestamp: 2023-11-09 16:37:21
lastmod: 2023-11-09 16:37:21
status_changed: 2023-11-09 16:32:06
type: article
metadata_visibility: show
creators_name: Balakrishnan, S.R.
creators_name: Hashim, U.
creators_name: Sahrim, M.
creators_name: Ismail, I.
creators_name: Jamaludin, J.
creators_name: Ismail, W.Z.W.
creators_name: Perumal, V.
creators_name: Haarindraprasad, R.
creators_name: Mahalingam, S.
title: Design and fabrication of polydimethylsiloxane based low cost microfluidic for ultra-fast diagnostic applications
ispublished: pub
note: cited By 0
abstract: Diagnostic tools such as Point-of-Care (POC) analysis usually requires an on-site testing and measurements. Hence, to ease the fluid sample handling, microfluidics technology has been opted frequently to be incorporated with lab-on-chip (LOC). Therefore, an easy and conventional method of design and fabrication of the microfluidic device implemented. In this study, the device is fabricated with Polydimethylsiloxane (PDMS) and SU-8 using soft lithography technique. Herein, we focus on fluid transportation which is applied in clinical diagnostics and the transfer rate to the desired position as well as the fluid leakage during the transportation. Hence, the microfluidic sample transport channeling provides a practical solution for POC technological advances to study the biological systems that yield a better result in quantitative measurements and providing researchers new tools for life science research. © Penerbit UTHM.
date: 2018
publisher: Penerbit UTHM
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85057149030&doi=10.30880%2fijie.2018.10.04.018&partnerID=40&md5=c9d231eac2915ae65122af4a691b4ccd
id_number: 10.30880/ijie.2018.10.04.018
full_text_status: none
publication: International Journal of Integrated Engineering
volume: 10
number: 4
pagerange: 109-113
refereed: TRUE
issn: 2229838X
citation:   Balakrishnan, S.R. and Hashim, U. and Sahrim, M. and Ismail, I. and Jamaludin, J. and Ismail, W.Z.W. and Perumal, V. and Haarindraprasad, R. and Mahalingam, S.  (2018) Design and fabrication of polydimethylsiloxane based low cost microfluidic for ultra-fast diagnostic applications.  International Journal of Integrated Engineering, 10 (4).  pp. 109-113.  ISSN 2229838X