eprintid: 10716
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/07/16
datestamp: 2023-11-09 16:37:19
lastmod: 2023-11-09 16:37:19
status_changed: 2023-11-09 16:32:02
type: article
metadata_visibility: show
creators_name: Moradi, B.
creators_name: Ayoub, M.
creators_name: Bataee, M.
title: Sensitivity analysis of the parameters affecting temperature and pressure profiles along the wellbore
ispublished: pub
note: cited By 0
abstract: An appropriate injection well completion design requires a knowledge of pressure and temperature profiles along the depth of the well. The results of sensitivity analysis can be used for preliminary design calculations of injection wells to find the optimum injection surface parameters and wellbore completion. In this study, the surface injection parameters and wellbore geometry are varied to examine the sensitivity of the results for various parameters by using the numerical model during water and gas injections. The results revealed that the temperature profile can be calculated for a single phase with a small error in absence of the pressure profile, the error is less than 3 . It is found that the contribution of the acceleration term is too weak for building pressure and tem-perature profiles (less than 0.001). Further, those comparisons of the results showed that except near the critical point, the pressure profile is not sensitive to the wellhead injection temperature (less than 1 ). © Pet Coal 2018.
date: 2018
publisher: Slovnaft VURUP a.s
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85059186867&partnerID=40&md5=56100048301dff940692b7a4466ca8a2
full_text_status: none
publication: Petroleum and Coal
volume: 60
number: 6
pagerange: 1291-1303
refereed: TRUE
issn: 13377027
citation:   Moradi, B. and Ayoub, M. and Bataee, M.  (2018) Sensitivity analysis of the parameters affecting temperature and pressure profiles along the wellbore.  Petroleum and Coal, 60 (6).  pp. 1291-1303.  ISSN 13377027