eprintid: 10626
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/06/26
datestamp: 2023-11-09 16:37:14
lastmod: 2023-11-09 16:37:14
status_changed: 2023-11-09 16:31:50
type: conference_item
metadata_visibility: show
creators_name: Hamada, G.
creators_name: Joseph, V.
title: Developed correlations between sound wave velocity and porosity, permeability and mechanical properties of sandstone core samples
ispublished: pub
keywords: Acoustic wave velocity; Cementing (shafts); Compaction; Core samples; Grain size and shape; Mineral exploration; Petroleum reservoir evaluation; Petrophysics; Porosity; Proven reserves; Sandstone; Wave propagation, Cementing material; Compaction pressure; Different confining pressures; Grain size distribution; Initial permeability; Permeability and porosities; Petroleum reserve; Petrophysical properties, Mechanical permeability
note: cited By 0; Conference of 2nd Conference on Geophysics for Mineral Exploration and Mining ; Conference Date: 9 September 2018 Through 13 September 2018; Conference Code:143675
abstract: In the evaluation of a petroleum reserve, it is necessary to determine accurately certain petrophysical properties such as porosity and permeability of the reservoir rocks under different compaction conditions. These properties are affected by the relevant physical properties and such physical properties and mechanical properties affect the drilling programs and the development plans for a reservoir. It is more convenient to use homogenous rock samples with nearly constant initial permeability, obtaining such cores is very difficult. In this paper a simulated natural and homogeneous compacted sandstone rock with known physical and petrophysical properties were used. The physical properties include grain size, cementing material concentration, and compaction (confining) pressure. The effect of these properties on the petrophysical properties of Rock such as permeability and porosity were also known. For the same simulated natural sandstone rocks, Sound wave velocity was measured using an ultra sound tool. Good relationships have been developed between sound wave velocity and other rock properties; porosity, permeability, cementing condition and grain size distribution at different confining pressures. The sandstone cores have been grouped according grain size to five groups ranged between 45 and 300 μm mixed with different concentrations of cementing material. The mixture was compacted at three different compaction pressure ranges from 11000 to 23000 psi. These varying lithification factors gave these sandstone rocks a wide range of petrophysical and physical properties. The results of this study were presented as graphs of simulated lithification factors, porosity, and permeability versus sound wave velocity. © 2018 European Association of Geoscientists and Engineers, EAGE. All rights reserved.
date: 2018
publisher: European Association of Geoscientists and Engineers, EAGE
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85088201138&doi=10.3997%2f2214-4609.201802686&partnerID=40&md5=80486f8ace56982bce285f8623611e87
id_number: 10.3997/2214-4609.201802686
full_text_status: none
publication: 2nd Conference on Geophysics for Mineral Exploration and Mining
refereed: TRUE
isbn: 9789462822658
citation:   Hamada, G. and Joseph, V.  (2018) Developed correlations between sound wave velocity and porosity, permeability and mechanical properties of sandstone core samples.  In: UNSPECIFIED.