eprintid: 10453
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/04/53
datestamp: 2023-11-09 16:37:04
lastmod: 2023-11-09 16:37:04
status_changed: 2023-11-09 16:31:27
type: conference_item
metadata_visibility: show
creators_name: Abdul-Rani, A.M.
creators_name: Sidid, A.A.B.C.
creators_name: Ab Adzis, A.H.
title: Study on the Effect of Diamond Grain Size on Wear of Polycrystalline Diamond Compact Cutter
ispublished: pub
keywords: ABAQUS; Diamond drills; Diamonds; Gas industry; Grain size and shape; Manufacture; Polycrystalline materials; Rock drilling; Wear of materials; Well drilling, Diamond grain size; Drilling operation; FEA software; Oil and gas; Oil and Gas Industry; PDC cutters; Polycrystalline diamond compact bits; Polycrystalline diamond compacts, Diamond drilling
note: cited By 4; Conference of 3rd International Conference on Mechanical, Manufacturing and Process Plant Engineering 2017, ICMMPE 2017 ; Conference Date: 22 November 2017 Through 23 November 2017; Conference Code:135320
abstract: Drilling operation is one of the most crucial step in oil and gas industry as it proves the availability of oil and gas under the ground. Polycrystalline Diamond Compact (PDC) bit is a type of bit which is gaining popularity due to its high Rate of Penetration (ROP). However, PDC bit can easily wear off especially when drilling hard rock. The purpose of this study is to identify the relationship between the grain sizes of the diamond and wear rate of the PDC cutter using simulation-based study with FEA software (ABAQUS). The wear rates of a PDC cutter with a different diamond grain sizes were calculated from simulated cuttings of cutters against granite. The result of this study shows that the smaller the diamond grain size, the higher the wear resistivity of PDC cutter. © Published under licence by IOP Publishing Ltd.
date: 2018
publisher: Institute of Physics Publishing
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85044499729&doi=10.1088%2f1757-899X%2f328%2f1%2f012004&partnerID=40&md5=80f8a92624e999f4b8e67e941ccf1c63
id_number: 10.1088/1757-899X/328/1/012004
full_text_status: none
publication: IOP Conference Series: Materials Science and Engineering
volume: 328
number: 1
refereed: TRUE
issn: 17578981
citation:   Abdul-Rani, A.M. and Sidid, A.A.B.C. and Ab Adzis, A.H.  (2018) Study on the Effect of Diamond Grain Size on Wear of Polycrystalline Diamond Compact Cutter.  In: UNSPECIFIED.