eprintid: 10108
rev_number: 2
eprint_status: archive
userid: 1
dir: disk0/00/01/01/08
datestamp: 2023-11-09 16:36:44
lastmod: 2023-11-09 16:36:44
status_changed: 2023-11-09 16:30:36
type: article
metadata_visibility: show
creators_name: Satar, I.
creators_name: Daud, W.R.W.
creators_name: Kim, B.H.
creators_name: Somalu, M.R.
creators_name: Ghasemi, M.
creators_name: Bakar, M.H.A.
creators_name: Jafary, T.
creators_name: Timmiati, S.N.
title: Performance of titanium�nickel (Ti/Ni) and graphite felt-nickel (GF/Ni) electrodeposited by Ni as alternative cathodes for microbial fuel cells
ispublished: pub
keywords: Catalysts; Cathodes; Costs; Electrodeposition; Felt; Graphite; Nickel; Scanning electron microscopy; X ray diffraction, Bioelectrochemical systems (BESs); Catalytic performance; Columbic efficiency; Electrodeposition technique; Maximum power density; Microbial fuel cells (MFCs); Nickel catalyst; Preparation technique, Microbial fuel cells
note: cited By 21
abstract: Electrodes are important components of bioelectrochemical systems (BESs), such as the microbial fuel cells (MFCs). The low-cost cathodes of titanium�nickel (Ti/Ni) and graphite felt-nickel (GF/Ni) are important to be evaluated as cathodes for MFCs. In this study, Ni particles are deposited onto the Ti and GF surface using a simple and low-cost electrodeposition technique. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used to analyse the cathode surfaces. The electrodeposition of Ni onto GF appears more uniform without significant agglomeration compared with that onto Ti. This uniform deposition is perhaps the reason for a higher maximum power density (Pmax), lower internal resistance (Rin) and higher Columbic efficiency (CE) for MFC with GF/Ni cathode (113.4 ± 0.6 mW/m2, 1264.4 Ω and 29.6, respectively) than those measured with Ti/Ni cathode (110.7 ± 8.0 mW/m2, 3375.8 Ω and 23.7, respectively). However, the performance of these cathodes remains lower compared with the GF/Pt cathode (140.0 mW/m2, 845.7 Ω and 42.0, respectively). Based on the preparation technique, material cost and performance, both Ti/Ni and GF/Ni cathodes can be considered as alternative to Pt catalyst for MFC application. © 2018 Taiwan Institute of Chemical Engineers
date: 2018
publisher: Taiwan Institute of Chemical Engineers
official_url: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85046141797&doi=10.1016%2fj.jtice.2018.04.010&partnerID=40&md5=eea5a6e130df12e7ad974514014e6d7e
id_number: 10.1016/j.jtice.2018.04.010
full_text_status: none
publication: Journal of the Taiwan Institute of Chemical Engineers
volume: 89
pagerange: 67-76
refereed: TRUE
issn: 18761070
citation:   Satar, I. and Daud, W.R.W. and Kim, B.H. and Somalu, M.R. and Ghasemi, M. and Bakar, M.H.A. and Jafary, T. and Timmiati, S.N.  (2018) Performance of titanium�nickel (Ti/Ni) and graphite felt-nickel (GF/Ni) electrodeposited by Ni as alternative cathodes for microbial fuel cells.  Journal of the Taiwan Institute of Chemical Engineers, 89.  pp. 67-76.  ISSN 18761070