Low pressure injection molding of boron admixed 316l stainless steel for engineering applications

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Rafi Raza, M. (2016) Low pressure injection molding of boron admixed 316l stainless steel for engineering applications. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11960-11965. ISSN 18196608

Full text not available from this repository.
Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

This study was conducted to evaluate the effects of elemental boron on densification of 316L stainless steels. Elemental nano size boron (nB) powder of 0.5, 1 and 1.5 wt. was blended with 316L SS to produce homogeneous feedstock for low pressure powder injection molding (LPIM) process. LPIM molded samples were sintered at 1230°C using high vacuum 10-5Torr. The Results showed that addition of elemental boron has favorable effects on densification. Addition of 0.5 wt nano size elemental boron in 316L SS has enhanced densification up to 98.5. Defect free gears were injection molded and sintered successfully using optimal sintering cycle. ©2006-2016 Asian Research Publishing Network (ARPN).

Item Type: Article
Additional Information: cited By 2
Depositing User: Mr Ahmad Suhairi UTP
Date Deposited: 09 Nov 2023 16:19
Last Modified: 09 Nov 2023 16:19
URI: https://khub.utp.edu.my/scholars/id/eprint/7769

Actions (login required)

View Item
View Item