Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusuf, S. and Alshareef, I. and Chin, S.A. (2015) Pyrolysis of Napier Grass in a Fixed Bed Reactor: Effect of Operating Conditions on Product Yields and Characteristics. BioResources, 10 (4). pp. 6457-6478. ISSN 19302126
Full text not available from this repository.Abstract
This study presents a report on pyrolysis of Napier grass stem in a fixed bed reactor. The effects of nitrogen flow (20 to 60 mL/min), and reaction temperature (450 to 650 °C) were investigated. Increasing the nitrogen flow from 20 to 30 mL/min increased the bio-oil yield and decreased both bio-char and non-condensable gas. 30 mL/min nitrogen flow resulted in optimum bio-oil yield and was used in the subsequent experiments. Reaction temperatures between 450 and 600 °C increased the bio-oil yield, with maximum yield of 32.26 wt at 600 oC and a decrease in the corresponding bio-char and non-condensable gas. At 650 °C, reductions in the bio-oil and bio-char yields were recorded while the non-condensable gas increased. Water content of the bio-oil decreased with increasing reaction temperature, while density and viscosity increased. The observed pH and higher heating values were between 2.43 to 2.97, and 25.25 to 28.88 MJ/kg, respectively. GC-MS analysis revealed that the oil was made up of highly oxygenated compounds and requires upgrading. The bio-char and non-condensable gas were characterized, and the effect of reaction temperature on the properties was evaluated. Napier grass represents a good source of renewable energy when all pyrolysis products are efficiently utilized. © 2015. All Rights Reserved.
Item Type: | Article |
---|---|
Additional Information: | cited By 51 |
Uncontrolled Keywords: | Nitrogen; Pyrolysis, Fixed bed reactor; Higher heating value; Highly oxygenated compounds; Non-condensable gas; Operating condition; Pyrolysis products; Reaction temperature; Renewable energies, Chemical reactors, Characteristics; Chemical Reactors; Gas; Nitrogen; Oil; Pyrolysis; Temperature; Yield |
Depositing User: | Mr Ahmad Suhairi UTP |
Date Deposited: | 09 Nov 2023 16:17 |
Last Modified: | 09 Nov 2023 16:17 |
URI: | https://khub.utp.edu.my/scholars/id/eprint/6064 |