Riahi, A. and Yusof, K.W. and Isa, M.H. and Mahinder Singh, B.S. and Sapari, N. (2014) Solar stills productivity with different arrangements of PV-DC heater and sand layer in still basin: A comparative investigation. Research Journal of Applied Sciences, Engineering and Technology, 8 (11). pp. 1363-1372. ISSN 20407459
Full text not available from this repository.Abstract
Solar energy as a sustainable and accessible energy source can be harnessed and converted to electrical energy using photovoltaic modules. Solar Photovoltaic (PV) systems show tremendous promise as sustainable, environmentally friendly and low-cost electricity sources. Solar energy can also be applied to produce potable water using solar distillation still. In this study, water production performance of four low-cost solar stills with different arrangements of PV module-DC heater and sea sand layer in the solar still basin was evaluated. Four types of double slope single basin solar distillation stills with similar shapes were fabricated. A stainless steel basin with length 50 cm, width 30 cm and depth 8 cm was used in each solar still. The still configurations differed based on inclusion of 2 cm depth of sea sand layer in the basin and use of a 50 Watts PV-DC heater. A comparison of the cumulative water production among these solar stills showed that the integrated system that included sea sand in the solar still basin and also used PV-DC heater was the most effective; producing two times the water produced by a conventional solar still. The integrated solar still can be employed in coastal and rural areas with lack of clean water and electricity supply. © Maxwell Scientific Organization, 2014.
Item Type: | Article |
---|---|
Additional Information: | cited By 8 |
Depositing User: | Mr Ahmad Suhairi UTP |
Date Deposited: | 09 Nov 2023 16:16 |
Last Modified: | 09 Nov 2023 16:16 |
URI: | https://khub.utp.edu.my/scholars/id/eprint/4622 |