Comparison studies of Criado and coats-Redfern methods for co-gasification of rubber seed shell with high density polyethylene mixtures

Fui, B.C.L. and Yusup, S. and Shoaibi, A.A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Comparison studies of Criado and coats-Redfern methods for co-gasification of rubber seed shell with high density polyethylene mixtures. Applied Mechanics and Materials, 472. pp. 621-625. ISSN 16609336

Full text not available from this repository.
Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

In this present study, the gasification kinetics of rubber seed shell, high density polyethylene, and their mixtures (20/80 and 40/60 weight ratio of HDPE/RSS) are investigated using a non-isothermal thermogravimetric analysis (TGA) system at heating rate of 10 K/min in the temperature range of 323-1173 K. The argon gas is supplied at a flowrate of 100 ml/min and the steam is generated from superheater at 383 K. The steam is injected at flowrate of 300 μL/hour into the TGA system. The Criado and Coats-Redfern methods are used to investigate the reliability of the determined value of the activation energy, EA from the experimental data of TGA. The interaction of solid-phase components based on the mentioned experimental conditions is also studied. © (2014) Trans Tech Publications, Switzerland.

Item Type: Article
Additional Information: cited By 7; Conference of 2014 4th International Conference on Mechanical Science and Engineering, ICMSE 2014 ; Conference Date: 2 January 2014 Through 4 January 2014; Conference Code:102249
Uncontrolled Keywords: Co-gasification; Coats-Redfern method; Comparison study; Criado method; Experimental conditions; Gasification kinetics; Rubber seed shell; Temperature range, Activation energy; Argon; High density polyethylenes; Mixtures; Rubber, Gasification
Depositing User: Mr Ahmad Suhairi UTP
Date Deposited: 09 Nov 2023 16:16
Last Modified: 09 Nov 2023 16:16
URI: https://khub.utp.edu.my/scholars/id/eprint/4408

Actions (login required)

View Item
View Item