The biologically treated palm oil mill effluent (POME) urges further treatment to minimize the residual pollutant concentration for safe discharge in the nearest watercourse. In the present study, the post-treatment of biologically treated POME was conducted using ferrous sulfate monohydrate (FeSO4·H2O) as a coagulant. The influence of the FeSO4·H2O coagulation of POME was determined on the elimination of biochemical oxygen demand (BOD), suspended solids (SS), and chemical oxygen demand (COD) with varying flocculation time (min), slow mixing speed (rpm), coagulant doses (g/L) and pH. The FeSO4·H2O coagulation�flocculation experimental conditions were designed following the central composite design (CCD) of experiments and optimized by employing response surface methodology (RSM) based on the optimal SS, COD, and BOD elimination from POME. The maximum BOD, SS, and COD elimination achieved were about 96, 97, and 98, respectively, at the optimized experimental condition. The surface morphology and elemental composition analyses of raw FeSO4·H2O and sludge generated after coagulation revealed that the FeSO4·H2O effectively removed the colloidal and suspended particles from POME. The well-fitted kinetic model equation was the pseudo-second-order kinetic equation to describe the FeSO4·H2O coagulation�flocculation behavior. The thermodynamics properties analyses revealed that the FeSO4·H2O coagulation of POME was non-spontaneous and endothermic. The residual SS, COD, and BOD in treated POME were determined to be 28.27 ± 5 mg/L, 147 ± 3 mg/L, and 6.36 ± 0.5 mg/L, respectively, lower the recommended discharged limits as reported by the Department of Environment (DoE), Malaysia. © 2022 by the authors.