Vijaya Kumar, S.D. and Karuppanan, S. and Perumal, V. and Ovinis, M. (2024) Failure pressure prediction of high-strength steel pipe bend considering pipe and corrosion geometry. Discover Applied Sciences, 6 (4).

Subramani, I.G. and Remesh, S. and Perumal, V. and Gopinath, S.C.B. and Karuppanan, S. and Raja, P.B. and Ovinis, M. and Arumugam, N. and Kumar, R.S. (2024) Flexible laser-induced graphene electrodes on polyimide film: Hybrid nanoflower-modified dielectric microjunctions for non-faradaic analysis. Biochemical Engineering Journal, 208.

Iqbal, M. and Karuppanan, S. and Perumal, V. and Ovinis, M. and Iqbal, M. and Rasul, A. (2024) Optimization of fibre orientation for composite reinforcement of circular hollow section KT-joints. International Journal of Structural Integrity.

Iqbal, M. and Karuppanan, S. and Perumal, V. and Ovinis, M. and Khan, A. and Faizan, M. (2024) Stress Concentration Factors in KT-Joints Subjected to Complex Bending Loads Using Artificial Neural Networks. Civil Engineering Journal (Iran), 10 (4). pp. 1051-1068.

Lee, Y.X. and Ahmad, F. and Karuppanan, S. and Sumby, C. and Shahed, C.A. and Ramli, S.H. (2024) Thermo-mechanical performance of wolframite mineral reinforced siloxane-modified epoxy-based intumescent coating for structural steel. Polymers for Advanced Technologies, 35 (1).

Rasul, A. and Karuppanan, S. and Perumal, V. and Ovinis, M. and Iqbal, M. (2024) An artificial neural network model for determining stress concentration factors for fatigue design of tubular T-joint under compressive loads. International Journal of Structural Integrity.

Remesh, S. and Loganathan, N.N. and Perumal, V. and Ovinis, M. and Karuppanan, S. and Edison, T.N.J.I. and Raja, P.B. and Ibrahim, M.N.M. and Arumugam, N. and Kumar, R.S. (2024) A high performance selectively grown nano-octahedral Mn3O4 on lignin derived laser scribed graphene for microsupercapacitor applications. Journal of Energy Storage, 77.

Sajid, Z. and Karuppanan, S. and Eng, K.K. and Shah, S.Z.H. (2023) Analytical Method for the Optimization of the Open-Hole and Filled-Hole Laminates at the Preliminary Design Stage. Materials, 16 (6).

Devi Vijaya Kumar, S. and Karuppanan, S. and Ovinis, M. (2023) Application of Artificial Neural Network for Failure Pressure Prediction of Pipeline with Circumferential Groove Corrosion Defect. Lecture Notes in Mechanical Engineering. pp. 939-954.

Vasudevan, M. and Kanesan, A. and Remesh, S. and Perumal, V. and Raja, P.B. and Ibrahim, M.N.M. and Karuppanan, S. and Gopinath, S.C.B. and Ovinis, M. (2023) Characterizations of synthesized laser-scribed graphene/ molybdenum disulfide (LSG/MoS2) hybrids for supercapacitor performance. Journal of Water and Environmental Nanotechnology, 8 (2). pp. 137-150.

Iqbal, M. and Karuppanan, S. and Perumal, V. and Ovinis, M. and Nouman, H. (2023) Empirical modeling of stress concentration factors using finite element analysis and artificial neural networks for the fatigue design of tubular KT-joints under combined loading. Fatigue and Fracture of Engineering Materials and Structures, 46 (11). pp. 4333-4349.

Vasudevan, M. and Remesh, S. and Perumal, V. and Raja, P.B. and Ibrahim, M.N.M. and Gopinath, S.C.B. and Karuppanan, S. and Ovinis, M. (2023) Facile synthesis of MoS2 nanoflower-Ag NPs grown on lignin-derived graphene for Troponin I aptasensing. Chemical Engineering Journal, 468.

Vijaya Kumar, S.D. and Karuppanan, S. and Perumal, V. and Ovinis, M. (2023) Failure Pressure Prediction of Corroded High-Strength Steel Pipe Elbow Subjected to Combined Loadings Using Artificial Neural Network. Mathematics, 11 (7).

Remesh, S. and Vasudevan, M. and Sivakumar, M. and Perumal, V. and Ovinis, M. and Karuppanan, S. and Edison, T.N.J.I. and Raja, P.B. and Ibrahim, M.N.M. and Latip, A.F.B.A. and Arumugam, N. and Kumar, R.S. (2023) In-situ Mg-Al LDH infused lignin-derived laser scribed graphene for facilitated ion transport in flexible supercapacitor application. Journal of the Taiwan Institute of Chemical Engineers, 153.

Arumugam, T. and Vijaya Kumar, S.D. and Karuppanan, S. and Ovinis, M. (2023) The Influence of Axial Compressive Stress and Internal Pressure on a Pipeline Network: A Review. Applied Sciences (Switzerland), 13 (6).

Vasudevan, M. and Remesh, S. and Perumal, V. and Raja, P.B. and Ibrahim, M.N.M. and Gopinath, S.C.B. and Lee, H.-L. and Karuppanan, S. and Ovinis, M. and Arumugam, N. and Kumar, R.S. (2023) Lignin derived nanoparticle intercalation on nitrogen-doped graphene quantum dots for electrochemical sensing of cardiac biomarker. Microchemical Journal, 195.

Arumugam, T. and Karuppanan, S. and Ovinis, M. (2023) Numerical Failure Analysis of Corroded Pipeline Elbow with Longitudinally Aligned Interacting Corrosion Defects. Lecture Notes in Mechanical Engineering. pp. 899-917.

Iqbal, M. and Karuppanan, S. and Perumal, V. and Ovinis, M. and Rasul, A. (2023) Numerical Investigation of Crack Mitigation in Tubular KT-Joints Using Composite Reinforcement â�. Engineering Proceedings, 56 (1).

Remesh, S. and Vasudevan, M. and Perumal, V. and Ovinis, M. and Karuppanan, S. and Edison, T.N.J.I. and Raja, P.B. and Ibrahim, M.N.M. and Voon, C.H. and Arumugam, N. and Kumar, R.S. (2023) Oil palm lignin-derived laser scribed graphene in neutral electrolyte for high-performance microsupercapacitor application. Journal of Environmental Chemical Engineering, 11 (5).

Iqbal, M. and Karuppanan, S. and Perumal, V. and Ovinis, M. and Rasul, A. (2023) Rehabilitation Techniques for Offshore Tubular Joints. Journal of Marine Science and Engineering, 11 (2).

Perumal, P. and Karuppanan, S. and Ovinis, M. (2023) Residual Strength Prediction of a Pipeline with Interacting Corrosion Defects Subjected to Combined Loading Using Artificial Neural Networks. Lecture Notes in Mechanical Engineering. pp. 705-719.

Vasudevan, M. and Perumal, V. and Raja, P.B. and Ibrahim, M.N.M. and Lee, H.-L. and Gopinath, S.C.B. and Ovinis, M. and Karuppanan, S. and Ang, P.C. and Arumugam, N. and Kumar, R.S. (2023) A quadruplet 3-D laser scribed graphene/MoS2 functionalised N2-doped graphene quantum dots and lignin-based Ag-nanoparticles for biosensing. International Journal of Biological Macromolecules, 253.

Lo, M. and Karuppanan, S. and Ovinis, M. (2022) ANN-and FEA-Based Assessment Equation for a Corroded Pipeline with a Single Corrosion Defect. Journal of Marine Science and Engineering, 10 (4). ISSN 20771312

Patil, S.S. and Karuppanan, S. (2022) Analysis of frictional stress variations along tooth contact of spur and helical gears. CRC Press, pp. 115-143. ISBN 9781000778427; 9781032152349

Lo, M. and Vijaya Kumar, S.D. and Karuppanan, S. and Ovinis, M. (2022) An Artificial Neural Network-Based Equation for Predicting the Remaining Strength of Mid-to-High Strength Pipelines with a Single Corrosion Defect. Applied Sciences (Switzerland), 12 (3). ISSN 20763417

Kumar, S.D.V. and Karuppanan, S. and Ovinis, M. (2022) Artificial Neural Network-Based Failure Pressure Prediction of API 5L X80 Pipeline with Circumferentially Aligned Interacting Corrosion Defects Subjected to Combined Loadings. Materials, 15 (6). ISSN 19961944

Sajid, Z. and Karuppanan, S. and Kee, K.E. and Sallih, N. and Shah, S.Z.H. (2022) Bearing performance improvement of single-lap, single-bolt basalt composite joints by locally strengthening the joint location using carbon fibre. Thin-Walled Structures, 180. ISSN 02638231

Aslam Shaikh, A. and Anil Pradhan, A. and Mahesh Kotasthane, A. and Patil, S. and Karuppanan, S. (2022) Comparative analysis of Basalt/E-Glass/S2-Fibreglass-Carbon fiber reinforced epoxy laminates using finite element method. In: UNSPECIFIED.

Vasudevan, M. and Perumal, V. and Karuppanan, S. and Ovinis, M. and Bothi Raja, P. and Gopinath, S.C.B. and Immanuel Edison, T.N.J. (2022) A Comprehensive Review on Biopolymer Mediated Nanomaterial Composites and Their Applications in Electrochemical Sensors. Critical Reviews in Analytical Chemistry. ISSN 10408347

Sajid, Z. and Karuppanan, S. and Shah, S.Z.H. (2022) Effect of Washer Size and Tightening Torque on Bearing Performance of Basalt Fiber Composite Bolted Joints. Journal of Natural Fibers, 19 (13). pp. 5910-5927. ISSN 15440478

Vijaya Kumar, S.D. and Lo, M. and Karuppanan, S. and Ovinis, M. (2022) Empirical Failure Pressure Prediction Equations for Pipelines with Longitudinal Interacting Corrosion Defects Based on Artificial Neural Network. Journal of Marine Science and Engineering, 10 (6). ISSN 20771312

Kumar, S.D.V. and Lo, M. and Karuppanan, S. and Ovinis, M. (2022) Failure Pressure Prediction of Medium to High Toughness Pipe with Circumferential Interacting Corrosion Defects Subjected to Combined Loadings Using Artificial Neural Network. Applied Sciences (Switzerland), 12 (9). ISSN 20763417

Vijaya Kumar, S.D. and Tengku, H.A. and Karuppanan, S. (2022) Failure Pressure Prediction of Pipe Elbow with Longitudinally Aligned Interacting Corrosion Defects Subjected to Internal Pressure. In: UNSPECIFIED.

Pradhan, A.A. and Kotasthane, A.M. and Shaikh, A.A. and Patil, S. and Karuppanan, S. (2022) Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates. Mechanics of Advanced Composite Structures, 9 (2). pp. 263-274. ISSN 24234826

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. (2022) Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites. Applied Composite Materials, 29 (2). pp. 515-545. ISSN 0929189X

Sadeq, S. and Ovinis, M. and Karuppanan, S. (2022) Modeling and Simulation of PMSG Wind Energy Conversion System Using Active Disturbance Rejection Control. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 92 (1). pp. 105-122. ISSN 22897879

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Sajid, Z. (2022) Off-Axis and On-Axis Performance of Novel Acrylic Thermoplastic (Elium®) 3D Fibre-Reinforced Composites under Flexure Load. Polymers, 14 (11). ISSN 20734360

Afrathim, A. and Karuppanan, S. and Patil, S.S. (2021) Burst strength analysis of thin composite pressure vessels. In: UNSPECIFIED.

Sajid, Z. and Karuppanan, S. and Kee, K.E. and Sallih, N. and Shah, S.Z.H. (2021) Carbon/basalt hybrid composite bolted joint for improved bearing performance and cost efficiency. Composite Structures, 275. ISSN 02638223

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ud Din, I. and Othman, A.R. and Sharp, K. and Gerard, P. (2021) Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering, 207. ISSN 13598368

Sajid, Z. and Azmi, M.A.B.M. and Karuppanan, S. (2021) Effect of hybridization on the buckling behavior of perforated CFRP/BFRP laminates. Emerging Materials Research, 10 (1). pp. 66-74. ISSN 20460147

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Sultan, M.T.H. (2021) Experimental investigation on the effects of glass fiber hybridization on the low-velocity impact response of filament-wound carbon-based composite pipes. Polymers and Polymer Composites, 29 (7). pp. 829-841. ISSN 09673911

Lo, M. and Karuppanan, S. and Ovinis, M. (2021) Failure pressure prediction of a corroded pipeline with longitudinally interacting corrosion defects subjected to combined loadings using fem and ann. Journal of Marine Science and Engineering, 9 (3). ISSN 20771312

Kumar, S.D.V. and Karuppanan, S. and Ovinis, M. (2021) Failure pressure prediction of high toughness pipeline with a single corrosion defect subjected to combined loadings using artificial neural network (Ann). Metals, 11 (2). pp. 1-25. ISSN 20754701

Chin, K.T. and Arumugam, T. and Karuppanan, S. and Ovinis, M. (2021) Failure pressure prediction of pipeline with single corrosion defect using artificial neural network. Science and Technologies: Oil and Oil Products Pipeline Transportation, 11 (2). pp. 166-171. ISSN 22212701

Gu, H. and Guo, Z. and Naik, N. and Shetty, D.K. and Hameed, B.M.Z. and Chakraborty, U.K. and Paul, R. and Vanahalli, M.K. and Srivastava, D.K. and Gupta, A. and Singla, B. and Kumar, S. and Aaydee, N. and Liu, C. and Hao, Q. and Zhang, H. and Patil, S. and John, B. and Karuppanan, S. and Sun, L. and Le, T.Q. and Gurunathan, B. and Muthukumaran, C. and Sham Aan, M.P. and Lu, N. and Zhou, H.N. and Manoharan, A.N. and Maddodi, B. (2021) Frontiers of Advanced Sciences and Technologies: Results, Challenges and Perspectives. Engineered Science, 16. pp. 1-4. ISSN 2576988X

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Sajid, Z. (2021) Multiscale damage modelling of 3D woven composites under static and impact loads. Composites Part A: Applied Science and Manufacturing, 151. ISSN 1359835X

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. and Gerard, P. and Sharp, K. (2021) Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading. International Journal of Mechanical Sciences, 189. ISSN 00207403

Sajid, Z. and Karuppanan, S. and Sallih, N. and Kee, K.E. and Shah, S.Z.H. (2021) Role of washer size in mitigating adverse effects of bolt-hole clearance in a single-lap, single-bolt basalt composite joint. Composite Structures, 266. ISSN 02638223

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Abdul-Lateef, W.E. (2021) A comparative study of impact effect of composite cylinders and type IV pressure vessels. Emerging Materials Research, 10 (2). pp. 206-217. ISSN 20460147

Kumar, S.D.V. and Karuppanan, S. and Ovinis, M. (2021) An empirical equation for failure pressure prediction of high toughness pipeline with interacting corrosion defects subjected to combined loadings based on artificial neural network. Mathematics, 9 (20). ISSN 22277390

Kumar, S.D.V. and Kai, M.L.Y. and Arumugam, T. and Karuppanan, S. (2021) A review of finite element analysis and artificial neural networks as failure pressure prediction tools for corroded pipelines. Materials, 14 (20). ISSN 19961944

Arumugam, T. and Mohamad Rosli, M.K.A. and Karuppanan, S. and Ovinis, M. and Lo, M. (2020) Burst capacity analysis of pipeline with multiple longitudinally aligned interacting corrosion defects subjected to internal pressure and axial compressive stress. SN Applied Sciences, 2 (7). ISSN 25233971

Shah, S.Z.H. and Megat Yusoff, P.S.M. and Karuppanan, S. and Sajid, Z. (2020) Elastic constants prediction of 3d fiber-reinforced composites using multiscale homogenization. Processes, 8 (6). pp. 1-12. ISSN 22279717

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Ovinis, M. and Sultan, M.T.H. (2020) Experimental characterization of compression performance of carbon�basalt hybrid filament wound pipes before and after impact. Composites: Mechanics, Computations, Applications, 11 (1). pp. 25-38. ISSN 21522057

Arumugam, T. and Karuppanan, S. and Ovinis, M. (2020) Finite element analyses of corroded pipeline with single defect subjected to internal pressure and axial compressive stress. Marine Structures, 72. ISSN 09518339

Sajid, Z. and Karuppanan, S. and Shah, S.Z.H. (2020) Open-hole and filled-hole failure envelopes of bfrp and gfrp: A comparative study. Lecture Notes in Mechanical Engineering. pp. 391-398. ISSN 21954356

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Pandian, M.S. and Ferrer, E.M. and Suresh, K. (2020) Surface acoustic wave modes characteristics of CMOS compatible SiO2/AlN/SiO2/Si multilayer structure with embedded electrodes. Sensors and Actuators, A: Physical, 313. ISSN 09244247

Maper, A. and Karuppanan, S. and Patil, S.S. (2019) Analysis and formulation of spur gear stresses with different tip modifications ��齿�修正��齿轮�����计�. Journal of Central South University, 26 (9). pp. 2368-2378. ISSN 20952899

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Ovinis, M. (2019) Effects of carbon fiber hybridization on the compressive strength of glass-carbon/epoxy hybrid composite pipes before and after low velocity impact. Key Engineering Materials, 796. pp. 30-37. ISSN 10139826

Shah, S.Z.H. and Karuppanan, S. and Megat-Yusoff, P.S.M. and Sajid, Z. (2019) Impact resistance and damage tolerance of fiber reinforced composites: A review. Composite Structures, 217. pp. 100-121. ISSN 02638223

Maper, A. and Karuppanan, S. and Patil, S.S. (2019) Numerical analysis of low-velocity impact of carbon-basalt/epoxy hybrid laminates. Indian Journal of Engineering and Materials Sciences, 26 (5-6). pp. 349-355. ISSN 09714588

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Chand, A. (2019) PZT based multilayer surface acoustic wave device for high frequency applications. In: UNSPECIFIED.

Arumugam, T. and Karuppanan, S. and Ovinis, M. (2019) Residual strength analysis of pipeline with circumferential groove corrosion subjected to internal pressure. In: UNSPECIFIED.

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2019) A short review on frictional contact stress distribution in involute gears. Tribology in Industry, 41 (2). pp. 254-266. ISSN 03548996

Ovinis, M. and Karuppanan, S. and Sulaiman, S.A. and Melor, P.S. and Paiz, M.Z. and Urquia, A. (2018) A Comparative Analysis of Attainment of Program Outcomes for Courses with and without the Use of Modern Tools. In: UNSPECIFIED.

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Ovinis, M. (2018) Experimental Study of Low Velocity Impact Response of Carbon/Basalt Hybrid Filament Wound Composite Pipes. International Journal of Structural Stability and Dynamics, 18 (7). ISSN 02194554

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Malik, A.F. (2018) FEM Simulation Analysis of AlN/SiO 2 /Si Multilayer Structure and Effect of IDT Configuration on SAW Propagation Modes and Characteristics. In: UNSPECIFIED.

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Malik, A.F. and Iqbal, A. (2018) FEM analysis of sezawa mode SAW sensor for VOC based on CMOS compatible AlN/SiO2/Si multilayer structure. Sensors (Switzerland), 18 (6). ISSN 14248220

Eng, J. and Karuppanan, S. and Patil, S. (2018) Frictional stress analysis of spur gear with misalignments. Journal of Mechanical Engineering and Sciences, 12 (2). pp. 3566-3580. ISSN 22894659

Mengal, A.N. and Karuppanan, S. and Qaisarani, Z.N. and Siddique, M. and Kashif, M. and Najam, M. (2018) In-plane shear strength analysis of Basalt Fiber-Reinforced Epoxy Laminates with Biowaste Catalyst Free Carbon. In: UNSPECIFIED.

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Baharom, M.A. (2017) Burst pressure investigation of filament wound type IV composite pressure vessel. In: UNSPECIFIED.

Afrooz, I.E. and Sinnathambi, C.M. and Chuang, D.L. and Karuppanan, S. (2017) CFD simulation of bubbling fluidized bed: Effects of bed column geometry on hydrodynamics of gas�solid mixing: Numerische Strömungssimulation einer blasenbildenden Wirbelschicht: Einfluss der Reaktorgeometrie auf die hydrodynamischen Eigenschaften einer Gas-Feststoff Mischung. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 226-234. ISSN 09335137

Dhuban, S.B. and Karuppanan, S. and Mengal, A.N. and Patil, S.S. (2017) Effect of fiber orientation and ply stacking sequence on buckling behaviour of basalt-carbon hybrid composite laminates. Indian Journal of Engineering and Materials Sciences, 24 (3). pp. 187-193. ISSN 09714588

Shariffudin, K.A. and Karuppanan, S. and Patil, S.S. (2017) Finite element analysis of residual stress in cold expanded plate with different thickness and expansion ratio. In: UNSPECIFIED.

Mengal, A.N. and Karuppanan, S. and Ovinis, M. (2017) In�plane shear properties of basalt�carbon/epoxy hybrid composite laminates: In�plane Schereigenschaften von Basalt-Kohlenstoff/Epoxy-Hybrid-Verbundlaminaten. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 261-266. ISSN 09335137

Belachew, C.T. and Che Ismail, M. and Karuppanan, S. (2017) Strength Assessment of Corroded Pipelines - Finite Element Simulations and Parametric Studies. International Journal of Structural Stability and Dynamics, 17 (7). ISSN 02194554

Kuppusamy, C.S. and Karuppanan, S. and Patil, S.S. (2016) Buckling Strength of Corroded Pipelines with Interacting Corrosion Defects: Numerical Analysis. International Journal of Structural Stability and Dynamics, 16 (9). ISSN 02194554

Afrooz, I.E. and Sinnathambi, C.M. and Karuppanan, S. and Ching, D.L.C. (2016) CFD simulation of bubbling fluidized bed: Effect of distributor plate orifice pattern configuration on hydrodynamics of gas-solid mixing. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11954-11959. ISSN 18196608

Mengal, A.N. and Karuppanan, S. and Farhood, N.H. (2016) Compressive behaviour of basalt FRP and basalt-carbon hybrid frp laminates. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11994-11998. ISSN 18196608

Khoo, S.W. and Karuppanan, S. and Tan, C.S. (2016) Development of a quantifiable approach in monitoring the fatigue cracks using digital image correlation. Key Engineering Materials, 701. pp. 211-215. ISSN 10139826

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Mengal, A.N. (2016) Effect of low velocity impact on deformation behavior of metallic pressure vessel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13319-13324. ISSN 18196608

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2016) Experimental measurement of strain and stress state at the contacting helical gear pairs. Measurement: Journal of the International Measurement Confederation, 82. pp. 313-322. ISSN 02632241

Karuppanan, S. and Patil, S.S. (2016) Finite element analysis of stress variation along the depth of gear tooth. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12228-12233. ISSN 18196608

Belachew, C.T. and Mokhtar, C.I. and Karuppanan, S. (2016) Strength assessment of a corroded pipeline through the burst test: Case study. Journal of Pipeline Systems Engineering and Practice, 7 (3). 04016003. ISSN 19491190

Mengal, A.N. and Karuppanan, S. (2016) Study on interlaminar shear strength of angle ply oriented basalt-carbon hybrid composite. Key Engineering Materials, 701. pp. 300-306. ISSN 10139826

Khoo, S.-W. and Karuppanan, S. and Tan, C.-S. (2016) A review of surface deformation and strain measurement using two-dimensional digital image correlation. Metrology and Measurement Systems, 23 (3). pp. 461-480. ISSN 08608229

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2015) Contact stress evaluation of involute gear pairs, including the effects of friction and helix angle. Journal of Tribology, 137 (4). ISSN 07424787

Irawan, S. and Bharadwaj, A.M. and Temesgen, B. and Karuppanan, S. and Abdullah, M.Z.B. (2015) Effect of wear on the burst strength of l-80 steel casing. In: UNSPECIFIED.

Mengal, A.N. and Karuppanan, S. and Wahab, A.A. (2014) Basalt carbon hybrid composite for wind turbine rotor blades: A short review. Advanced Materials Research, 970. pp. 67-73. ISSN 10226680

Palaniandy, D.K. and Syed, Z.I. and Liew, M.S. and Karuppanan, S. (2014) Broadside vessel collision forces for conventional riser-guard. Applied Mechanics and Materials, 567. pp. 210-215. ISSN 16609336

Patil, S. and Karuppanan, S. and Atanasovska, I. and Wahab, A.A. and Lias, M.R. (2014) Contact stress analysis for gears of different helix angle using finite element method. In: UNSPECIFIED.

Patil, S.S. and Karuppanan, S. and Atanasovska, I. and Wahab, A.A. (2014) Contact stress analysis of helical gear pairs, including frictional coefficients. International Journal of Mechanical Sciences, 85. pp. 205-211. ISSN 00207403

Wei, K.S. and Karuppanan, S. and Wahab, A.A. (2014) Development of the shape functions for fatigue test using digital image correlation. Applied Mechanics and Materials, 465-46. pp. 862-866. ISSN 16609336

Karuppanan, S. and Abdul Wahab, A. and Patil, S. and Zahari, M.A. (2014) Estimation of burst pressure of corroded pipeline using finite element analysis (FEA). Advanced Materials Research, 879. pp. 191-198. ISSN 10226680

Ashri, M. and Karuppanan, S. and Patil, S. and Ibrahim, I. (2014) Modal analysis of a centrifugal pump impeller using finite element method. In: UNSPECIFIED.

Mengal, A.N. and Karuppanan, S. and Wahab, A.A. (2014) Structural analysis of basalt fiber reinforced plastic wind turbine blade. In: UNSPECIFIED.

Patil, S. and Karuppanan, S. and Abdul Wahab, A. (2013) Contact pressure evaluation of a gear pair along the line of action using finite element analysis. Applied Mechanics and Materials, 393. pp. 403-408. ISSN 16609336

Wei, K.S. and Karuppanan, S. and Abdul Latif, M.R.B. (2013) Development of an optical strain measurement method using digital image correlation. Asian Journal of Scientific Research, 6 (3). pp. 411-422. ISSN 19921454

Hilmee, M.I. and Chandra, M.S. and Karuppanan, S. and Fadhil, H.A.M. and Lias, M.R. (2013) Effects of different granular viscosity models on the bubbling fluidized bed - A numerical approach. Applied Mechanics and Materials, 393. pp. 857-862. ISSN 16609336

Ahmad Azmy, A. and Karuppanan, S. and Abdul Wahab, A. (2013) Failure pressure estimation of corroded pipeline with different depths of interacting defects subjected to internal pressure. Applied Mechanics and Materials, 393. pp. 1005-1010. ISSN 16609336

Karuppanan, S. and Hashim, M.H. and Wahab, A.A. (2013) Finite element simulation of residual stresses in cold-expanded plate. Asian Journal of Scientific Research, 6 (3). pp. 518-527. ISSN 19921454

Karuppanan, S. and Aminudin, A.S. and Wahab, A.A. (2012) Burst pressure estimation of corroded pipeline with interacting defects using Finite Element Analysis. Journal of Applied Sciences, 12 (24). pp. 2626-2630. ISSN 18125654

Mokhtar, S.N.F. and Wahab, A.A. and Karuppanan, S. (2012) Fracture toughness and fatigue crack growth study of friction stir welded plates. Journal of Applied Sciences, 12 (23). pp. 2469-2473. ISSN 18125654

Bin Ibrahim, M.H. and Mohd Najib, N.K. and Karuppanan, S. and Sinnathambi, C.M. (2012) Simulation study on the effect of air distribution on the bed height and bubble formation in bubbling fluidization reactor. In: UNSPECIFIED.

Belachew, C.T. and Ismail, M.C. and Karuppanan, S. (2011) Burst strength analysis of corroded pipelines by finite element method. Journal of Applied Sciences, 11 (10). pp. 1845-1850. ISSN 18125654

Wei, K.S. and Karuppanan, S. (2011) Stress intensity factor for cracks emanating from a shaft. Journal of Applied Sciences, 11 (10). pp. 1839-1844. ISSN 18125654

Wahab, A.A. and Latif, M.R.A. and Karuppanan, S. and Aziz, A.H.A. (2011) Three-dimensional reconstruction of resin-infused carbon fiber reinforced polymer composite. Malaysian Journal of Microscopy, 7 (1). pp. 176-180. ISSN 18237010

Philipps, A.G. and Karuppanan, S. and Banerjee, N. and Hills, D.A. (2009) Crack tip stress intensity factors for a crack emanating from a semi-infinite notch with application to the avoidance of fatigue in complete contacts. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (4). pp. 789-794. ISSN 09544062

Philipps, A.G. and Karuppanan, S. and Churchman, C.M. and Hills, D.A. (2008) Crack tip stress intensity factors for a crack emanating from a sharp notch. Engineering Fracture Mechanics, 75 (18). pp. 5134-5139. ISSN 00137944

Karuppanan, S. and Hills, D.A. (2008) Frictional complete contacts between elastically similar bodies subject to normal and shear load. International Journal of Solids and Structures, 45 (17). pp. 4662-4675. ISSN 00207683

Karuppanan, S. and Hills, D.A. (2008) Sliding of general frictional complete contacts. International Journal of Mechanical Sciences, 50 (9). pp. 1404-1410. ISSN 00207403