Academic Article RDF
pages:- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- more...
- Effect of Matrix Permeability on a Horizontal Shale Gas Well Performance using a Fully Coupled Fluid Flow with Geomechanics Model
- Effect of Mechanical Properties in Enhanced Polymeric Blend Membranes
- Effect of Membrane Materials and Operational Parameters on Performance and Energy Consumption of Oil/Water Emulsion Filtration
- Effect of membrane properties in a membrane rotating biological contactor for wastewater treatment
- Effect of membrane properties on tilted panel performance of microalgae biomass filtration for biofuel feedstock
- Effect of Metakaolin and PVA Fibres on the Workability and Mechanical Properties of Concrete
- Effect of Metal Doped-TiO<sub>2</sub> on the Performance of Dye Solar Cells (DSCs)
- Effect of MgO Loading on the Production of Biodiesel from Jatropha Oil in the Presence of MgO/MCM-22 Catalyst
- Effect of Microwave Incinerated Rice Husk Ash (MIRHA) on Workability and Compressive Strength of Concrete
- Effect of microwave irradiation on the etherification of biodiesel-derived glycerol in a solvent free process
- Effect of milling parameters on mechanical alloying of aluminum powders
- Effect of Mineral Filler type on Strength of Roller Compacted Rubbercrete for Pavement Applications
- Effect of mix composition on workability and compressive strength of self-compacting geopolymer concrete
- Effect of mixture strength and injection timing on combustion characteristics of a direct injection hydrogen-fueled engine
- Effect of Mn and Pb Promoters on the Performance of Cu/ZnO-Catalyst in CO<sub>2</sub> Hydrogenation to Methanol
- Effect of Mn+2 Doping and Vacancy on the Ferromagnetic Cubic 3C-SiC Structure Using First Principles Calculations
- Effect of MnZn Ferrite Nanofluids on the Wettability and Oil-Water Interfacial Tension
- Effect of Modification Techniques on Surface of Carbon Nanofiber as Catalyst Support
- Effect of Modified MIL-53 with Multi-Wall Carbon Nanotubes and Nanofibers on CO<sub>2</sub> Adsorption
- Effect of Mold Temperature on High-resilience Cold-cure Flexible Polyurethane Foam Surface Texture
- Effect of molecular structure on oxidative degradation of ester based transformer oil
- EFFECT OF MOORING LINE AZIMUTH ANGLE ON THE HYDRODYNAMIC PERFORMANCE OF A MOORED FPSO IN ULTRA-SHALLOW WATER
- EFFECT OF MOTORING VOLTAGE ON COMPRESSION RATIO OF A FREE-PISTON LINEAR GENERATOR ENGINE
- Effect of MXene Loaded on g-C3N4 Photocatalyst for the Photocatalytic Degradation of Methylene Blue
- Effect of N-Photovoltaic thermal integrated parabolic concentrator on milk temperature for pasteurization: A simulation study
- Effect of Na/Al and Si/Al Ratios on Adhesion Strength of Geopolymers as Coating Material
- Effect of NaNO3 and NaCl concentration on Nannochloropsis oculata cell biomass and FAME composition for biodiesel production
- Effect of nanocomposite SCP1 additive to waste cooking oil biodiesel as fuel enhancer on diesel engine performance and emission characteristics
- Effect of nanoparticles concentration on electromagnetic-assisted oil recovery using ZnO nanofluids
- Effect of nanosized titanium dioxide and zinc oxide as antimicrobial agents on early compressive strength of high-performance concrete