Altaf, Khurram

Altaf, Khurram

Dr.

Positions

Member, Center of Sustainable Resources for Intelligent and Efficient Mobility , Institute of Smart & Sustainable Living
Senior Lecturer, Mechanical Engineering Department , Faculty of Engineering
Senior Lecturer, Electrical & Electronic Engineering Department , Faculty of Engineering
Senior Lecturer, Universiti Teknologi PETRONAS 2014 -

member of

Mechanical Engineering Department

selected publications

academic article
- An investigation of thermal and hydrodynamic behaviour of compound fins under turbulent flow conditions: A numerical and experimental approach. Alexandria Engineering Journal. 89:149-171. 2024
- Experimental study and characterisation of 316L stainless steel parts fabricated with metal fused filament fabrication. Journal of Materials Research and Technology. 30:6686-6698. 2024
- Geometric Optimization of SLM-Printed AlSi10Mg Radial Heat Sinks: A Numerical and Experimental Approach for Natural Convection Conditions. Arabian Journal for Science and Engineering. 2024
- Multi-objective optimization of friction stir additively manufactured Al-7075 multi-layered laminates. Journal of Alloys and Compounds. 993:174659. 2024
- Bending performance and failure mechanisms of hybrid and regular sandwich composite structures with 3D printed corrugated cores. Composite Structures. 325:117580. 2023
- Experimental investigation on tool pin profile for defect-free multi-layered laminates using friction stir additive manufacturing. Results in Engineering. 20:101516. 2023
- Microstructure and mechanical performance of low-cost biomedical-grade Titanium-316L alloy. Journal of Materials Research and Technology. 27:8008-8022. 2023
- Not inspired enough: the mediating role of customer engagement between YouTube’s perceived advertising value and customer inspiration. Kybernetes. 2023
- Performance evaluation of 3D printed polymer heat exchangers: influence of printing temperature, printing speed and wall thickness with consideration of surface roughness. The International Journal of Advanced Manufacturing Technology. 128:3627-3647. 2023
- Effect of Raster Angle and Infill Pattern on the In-Plane and Edgewise Flexural Properties of Fused Filament Fabricated Acrylonitrile–Butadiene–Styrene. Applied Sciences. 12:12690. 2022
- Recent advancements in latent heat phase change materials and their applications for thermal energy storage and buildings: A state of the art review. Sustainable Energy Technologies and Assessments. 49:101646. 2022
- Thermal and hydraulic analysis of slotted plate fins heat sinks using numerical and experimental techniques. Case Studies in Thermal Engineering. 35:102109. 2022
- Comparative numerical and experimental analysis of thermal and hydraulic performance of improved plate fin heat sinks. Applied Thermal Engineering. 182:115949. 2021
- Life Cycle Assessment and Feasibility Study of Solar Based Multi- Generation System. Sustainable Energy Technologies and Assessments. 47:101321. 2021
- Mechanical properties of an additive manufactured CF-PLA/ABS hybrid composite sheet. Journal of Thermoplastic Composite Materials. 34:1577-1596. 2021
- On the Effects of Process Parameters and Optimization of Interlaminate Bond Strength in 3D Printed ABS/CF-PLA Composite. Polymers. 12:2155. 2020
- Binder removal by a two-stage debinding process for powder injection molding Fe–50Ni alloy parts. Materials Research Express. 6:0865e3. 2019
- Experimental and numerical characterization of mechanical properties of carbon/jute fabric reinforced epoxy hybrid composites. Journal of Mechanical Science and Technology. 33:4217-4226. 2019
- Influence of Tool Material, Tool Geometry, Process Parameters, Stacking Sequence, and Heat Sink on Producing Sound Al/Cu Lap Joints through Friction Stir Welding. Metals. 9:875. 2019
- An In-Depth Review on Direct Additive Manufacturing of Metals. IOP Conference Series: Materials Science and Engineering. 328:012005. 2018
- Experimental and Numerical Investigation of Six-Bar Linkage Application to Bellow Globe Valve for Compact Design. Applied Sciences. 8:1980. 2018
- Investigation of Boron addition and compaction pressure on the compactibility, densification and microhardness of 316L Stainless Steel. IOP Conference Series: Materials Science and Engineering. 344:012023. 2018
- Metal Injection Molding Process Parameters as A Function of Filling Performance of 3D Printed Polymer Mold. MATEC Web of Conferences. 225:06004. 2018
- Performance Analysis of Enhanced 3D Printed Polymer Molds for Metal Injection Molding Process. Metals. 8:433. 2018
- Rapid Prototyping of a Customized Cooling System for a Novel Crank Rocker Engine. International Journal of Engineering & Technology. 7:90. 2018
- ADDITIVE MANUFACTURING DESIGN OF GLOBE VALVE FOR OPTIMIZED FLOW. Transactions of the Canadian Society for Mechanical Engineering. 41:717-723. 2017
- Determining the effects of thermal conductivity on epoxy molds using profiled cooling channels with metal inserts. Journal of Mechanical Science and Technology. 30:4901-4907. 2016
- Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks. Advances in Materials Science and Engineering. 2016:1-9. 2016
- Powder injection molding of biocompatible stainless steel biodevices. Powder Technology. 295:84-95. 2016
- Numerical simulation of rock cutting using 2D AUTODYN. IOP Conference Series: Materials Science and Engineering. 100:012052. 2015
- Numerical study of profiled conformal cooling channels for cooling time reduction in injection mould tools. International Journal of Engineering Systems Modelling and Simulation. 7:230. 2015
- Overcoming Limitation in DFM Using Layer Manufacturing. Applied Mechanics and Materials. 660:94-98. 2014
- Prototype production and experimental analysis for circular and profiled conformal cooling channels in aluminium filled epoxy injection mould tools. Rapid Prototyping Journal. 19:220-229. 2013
- Comparative Thermal Analysis of Circular and Profiled Cooling Channels for Injection Mold Tools. Journal of Applied Sciences. 11:2068-2071. 2011
- Investigation on Surface Hardness and Microstructure Evolution in AA 7075-T651 Multi-Layered Laminate Fabricated Through Friction Stir Additive Manufacturing
chapter
- Thermal Analysis of Helical Pin Fins at Different Pitch Steps Through Numerical Technique. Lecture Notes in Mechanical Engineering. 71-83. 2024
- Effect of Filtering Techniques in Manufacturing of Optimal Topologies Using Additive Manufacturing. Advancement of Science and Technology. 167-177. 2023
- Plate Fin Heat Sink for the Application in Solar Thermal Power. Clean Energy Opportunities in Tropical Countries. 115-131. 2021
- Investigation of Alloy Composition and Sintering Parameters on the Corrosion Resistance and Microhardness of 316L Stainless Steel Alloy. Lecture Notes in Mechanical Engineering. 532-541. 2019
conference paper
- Effects of mold geometry on fiber orientation of powder injection molded metal matrix composites. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2015
- Thermal Conductivity Augmentation of Epoxy Injection Moulds for Cooling Time Reduction 2014
- Fabrication of circular and Profiled Conformal Cooling Channels in aluminum filled epoxy injection mould tools 2011

education and training

Ph.D. in Additive Manufacturing, Universiti Teknologi PETRONAS 2007 - 2011
M.Sc. in Mechanical Engineering, University of Engineering & Technology, Taxila. Pakistan 1999 - 2001
B.E. in Mechanical Engineering, University of Engineering & Technology, Taxila. Pakistan 1992

full name

Khurram Altaf

primary email

khurram.altaf@utp.edu.my

webpage

Publications in VIVO

Co-author Network

Contact Info

khurram.altaf@utp.edu.my

Websites