publication venue for
- Wear Analysis of NiTi Sand Screens Using Altair Discrete Element Method. 17:281. 2024
- A New 3D Mathematical Model for Simulating Nanofluid Flooding in a Porous Medium for Enhanced Oil Recovery. 16:5414. 2023
- Analytical Method for the Optimization of the Open-Hole and Filled-Hole Laminates at the Preliminary Design Stage. 16:2213. 2023
- Preparation of Carbon Nanotubes/Alumina Hybrid-Filled Phenolic Composite with Enhanced Wear Resistance. 16:2772. 2023
- The Impact of 3D Prism Cavity for Enhanced Oil Recovery Using Different Nanomaterials. 16:4011. 2023
- A Review on Recycling of Carbon Fibres: Methods to Reinforce and Expected Fibre Composite Degradations. 15:4991. 2022
- An Influence of Oxygen Flow Rate and Spray Distance on the Porosity of HVOF Coating and Its Effects on Corrosion—A Review. 15:6329. 2022
- Artificial Neural Network-Based Failure Pressure Prediction of API 5L X80 Pipeline with Circumferentially Aligned Interacting Corrosion Defects Subjected to Combined Loadings. 15:2259. 2022
- Cementitious Grouts for Semi-Flexible Pavement Surfaces—A Review. 15:5466. 2022
- Effect of Crumb Rubber, Fly Ash, and Nanosilica on the Properties of Self-Compacting Concrete Using Response Surface Methodology. 15:1501. 2022
- Effects of Graphene Oxide and Crumb Rubber on the Fresh Properties of Self-Compacting Engineered Cementitious Composite Using Response Surface Methodology. 15:2519. 2022
- Effects of Ionic Liquid, 1-Ethyl-3-methylimidazolium Chloride ([EMIM]Cl), on the Material and Electrical Characteristics of Asphaltene Thin Films. 15:2818. 2022
- Experimental Investigation on Ambient-Cured One-Part Alkali-Activated Binders Using Combined High-Calcium Fly Ash (HCFA) and Ground Granulated Blast Furnace Slag (GGBS). 15:1612. 2022
- Finite Element Analysis of Steel Plates with Rectangular Openings Subjected to Axial Stress. 15:4421. 2022
- Fire-Exposed Fly-Ash-Based Geopolymer Concrete: Effects of Burning Temperature on Mechanical and Microstructural Properties. 15:1884. 2022
- Influence of Elbow Angle on Erosion-Corrosion of 1018 Steel for Gas–Liquid–Solid Three Phase Flow. 15:3721. 2022
- Mechanical Performance and Corrosion Behaviour of Diffusion-Bonded A5083 Aluminium and A36 Mild Steel with Gallium Interlayer. 15:6331. 2022
- Mechanical, Microstructural and Drying Shrinkage Properties of NaOH-Pretreated Crumb Rubber Concrete: RSM-Based Modeling and Optimization. 15:2588. 2022
- Methane and Carbon Dioxide Hydrate Formation in the Presence of Metal-Based Fluid. 15:8670. 2022
- Microstructural Characterization of Fibric Peat Stabilized with Portland Cement and Silica Fume. 16:18. 2022
- Microstructure and Mechanical Properties of Modified 316L Stainless Steel Alloy for Biomedical Applications Using Powder Metallurgy. 15:2822. 2022
- Modelling and Optimization for Mortar Compressive Strength Incorporating Heat-Treated Fly Oil Shale Ash as an Effective Supplementary Cementitious Material Using Response Surface Methodology. 15:6538. 2022
- Optimization of CO2 Sorption onto Spent Shale with Diethylenetriamine (DETA) and Ethylenediamine (EDA). 15:8293. 2022
- Raytracing Modelling of Infrared Light Management Using Molybdenum Disulfide (MoS2) as a Back-Reflector Layer in a Silicon Heterojunction Solar Cell (SHJ). 15:5024. 2022
- Statistical Simulation of the Switching Mechanism in ZnO-Based RRAM Devices. 15:1205. 2022
- Temperature Dependent on Mechanical and Rheological Properties of EPDM-Based Magnetorheological Elastomers Using Silica Nanoparticles. 15:2556. 2022
- The Effect of Residual Solvent in Carbon−Based Filler Reinforced Polymer Coating on the Curing Properties, Mechanical and Corrosive Behaviour. 15:3445. 2022
- Thermal Expansion of 3C-SiC Obtained from In-Situ X-ray Diffraction at High Temperature and First-Principal Calculations. 15:6229. 2022
- Thermal Kinetics of Monocationic and Dicationic Pyrrolidinium-Based Ionic Liquids. 15:1247. 2022
- Torrefaction of Napier Grass and Oil Palm Petiole Waste Using Drop-Type Fixed-Bed Pyrolysis Reactor. 15:2890. 2022
- A Highly Sensitive Room Temperature CO2 Gas Sensor Based on SnO2-rGO Hybrid Composite. 14:522. 2021
- A Review of Finite Element Analysis and Artificial Neural Networks as Failure Pressure Prediction Tools for Corroded Pipelines. 14:6135. 2021
- A Systematic Literature Review on Waste-to-Resource Potential of Palm Oil Clinker for Sustainable Engineering and Environmental Applications. 14:4456. 2021
- An Exploratory Study on Resistance Spot Welding of Titanium Alloy Ti-6Al-4V. 14:2336. 2021
- Artificial Neural Network (ANN) and Finite Element (FEM) Models for GFRP-Reinforced Concrete Columns under Axial Compression. 14:7172. 2021
- Assessments of Process Parameters on Cutting Force and Surface Roughness during Drilling of AA7075/TiB2 In Situ Composite. 14:1726. 2021
- Axial Compressive Strength Models of Eccentrically-Loaded Rectangular Reinforced Concrete Columns Confined with FRP. 14:3498. 2021
- Bond Relationship of Carbon Fiber-Reinforced Polymer (CFRP) Strengthened Steel Plates Exposed to Service Temperature. 14:3761. 2021
- Curve Fitting for Damage Evolution through Regression Analysis for the Kachanov–Rabotnov Model to the Norton–Bailey Creep Law of SS-316 Material. 14:5518. 2021
- Degradation Monitoring of HDPE Material in CO2-Saturated NaCl Environment through Electrochemical Impedance Spectroscopy Technique. 14:2823. 2021
- Determination of Non-Recrystallization Temperature for Niobium Microalloyed Steel. 14:2639. 2021
- Development and Investigation of an Inexpensive Low Frequency Vibration Platform for Enhancing the Performance of Electrical Discharge Machining Process. 14:6192. 2021
- Effects of Petroleum-Based Oils as Dispersing Aids on Physicochemical Characteristics of Magnetorheological Elastomers. 14:7026. 2021
- Investigation of Coatings, Corrosion and Wear Characteristics of Machined Biomaterials through Hydroxyapatite Mixed-EDM Process: A Review. 14:3597. 2021
- Investigation of the Impact of Graphene Nanoplatelets (GnP) on the Bond Stress of High-Performance Concrete Using Pullout Testing. 14:7054. 2021
- Long-Term Strength Development of Fly Ash-Based One-Part Alkali-Activated Binders. 14:4160. 2021
- Mechanical Properties of Crumb Rubber Mortar Containing Nano-Silica Using Response Surface Methodology. 14:5496. 2021
- Modeling, Optimization and Performance Evaluation of TiC/Graphite Reinforced Al 7075 Hybrid Composites Using Response Surface Methodology. 14:4703. 2021
- Optimization of Cement-Based Mortar Containing Oily Sludge Ash by Response Surface Methodology. 14:6308. 2021
- Process Optimization of In Situ Magnetic-Anisotropy Spark Plasma Sintering of M-Type-Based Barium Hexaferrite BaFe12O19. 14:2650. 2021
- Produced Water Treatment with Conventional Adsorbents and MOF as an Alternative: A Review. 14:7607. 2021
- Properties of Rubberized Engineered Cementitious Composites Containing Nano-Silica. 14:3765. 2021
- Rheological Performance of Magnetorheological Grease with Embedded Graphite Additives. 14:5091. 2021
- Study and Use of Rice Husk Ash as a Source of Aluminosilicate in Refractory Coating. 14:3440. 2021
- Synthesis, Surface Nitriding and Characterization of Ti-Nb Modified 316L Stainless Steel Alloy Using Powder Metallurgy. 14:3270. 2021
- Systematic Performance Comparison of Fe3+/Fe0/Peroxymonosulfate and Fe3+/Fe0/Peroxydisulfate Systems for Organics Removal. 14:5284. 2021
- The Effect of Welding Current and Electrode Force on the Heat Input, Weld Diameter, and Physical and Mechanical Properties of SS316L/Ti6Al4V Dissimilar Resistance Spot Welding with Aluminum Interlayer. 14:1129. 2021
- The Implementation of Industrial Byproduct in Malaysian Peat Improvement: A Sustainable Soil Stabilization Approach. 14:7315. 2021
- Thin-Walled Cylindrical Shell Storage Tank under Blast Impacts: Finite Element Analysis. 14:7100. 2021
- Utilization of Crumb Rubber and High-Volume Fly Ash in Concrete for Environmental Sustainability: RSM-Based Modeling and Optimization. 14:3322. 2021
- Acid and Sulphate Attacks on a Rubberized Engineered Cementitious Composite Containing Graphene Oxide. 13:3125. 2020
- Activation of Rubber-Seed Shell Waste by Malic Acid as Potential CO2 Removal: Isotherm and Kinetics Studies. 13:4970. 2020
- Deformation Properties of Rubberized ECC Incorporating Nano Graphene Using Response Surface Methodology. 13:2831. 2020
- Effect of Elevated Temperature on the Compressive Strength and Durability Properties of Crumb Rubber Engineered Cementitious Composite. 13:3516. 2020
- Effect of Sand Fines Concentration on the Erosion-Corrosion Mechanism of Carbon Steel 90° Elbow Pipe in Slug Flow. 13:4601. 2020
- Flexural Behavior of Double-Skin Steel Tube Beams Filled with Fiber-Reinforced Cementitious Composite and Strengthened with CFRP Sheets. 13:3064. 2020
- Investigation of Fibers Reinforced Engineered Cementitious Composites Properties Using Quartz Powder. 13:2428. 2020
- Investigation on Hamburg Wheel-Tracking Device Stripping Performance Properties of Recycled Hot-Mix Asphalt Mixtures. 13:4704. 2020
- Optimization of Washing Processes in Solvothermal Synthesis of Nickel-Based MOF-74. 13:2741. 2020
- Pseudo-Ductility, Morphology and Fractography Resulting from the Synergistic Effect of CaCO3 and Bentonite in HDPE Polymer Nano Composite. 13:3333. 2020
- Strengthening the Structural Behavior of Web Openings in RC Deep Beam Using CFRP. 13:2804. 2020
- Study on Structural Performance of Asphalt Concrete and Hot Rolled Sheet Through Viscoelastic Characterization. 13:1133. 2020
- Influence of secondary reinforcement on behaviour of corbels with various types of high-performance fiber-reinforced cementitious composites. 12. 2019
- Compression after Impact Behaviour and Failure Analysis of Nanosilica-Toughened Thin Epoxy/GFRP Composite Laminates. 12:3057. 2019
- Effect of Biodegradable Binder Properties and Operating Conditions on Growth of Urea Particles in a Fluidized Bed Granulator. 12:2320. 2019
- Effect of Irradiated and Non-Irradiated Waste PET Based Cementitious Grouts on Flexural Strength of Semi-Flexible Pavement. 12:4133. 2019
- Effects of Modified Metakaolin Using Nano-Silica on the Mechanical Properties and Durability of Concrete. 12:2291. 2019
- Enhancement of Viscoelastic and Electrical Properties of Magnetorheological Elastomers with Nanosized Ni-Mg Cobalt-Ferrites as Fillers. 12:3531. 2019
- Erosion–Corrosion of 30°, 60°, and 90° Carbon Steel Elbows in a Multiphase Flow Containing Sand Particles. 12:3898. 2019
- Investigating the Effects of Fiber Reinforced Concrete on the Performance of End-Zone of Pre-Stressed Beams. 12:2093. 2019
- Multiresponse Optimization and Environmental Analysis in Direct Recycling Hot Press Forging of Aluminum AA6061. 12:1918. 2019
- Conjectured the Behaviour of a Recycled Metal Matrix Composite (MMC–AlR) Developed through Hot Press Forging by Means of 3D FEM Simulation. 11:958. 2018
- Effect of Unit Cell Type and Pore Size on Porosity and Mechanical Behavior of Additively Manufactured Ti6Al4V Scaffolds. 11:2402. 2018
- Hot Press as a Sustainable Direct Recycling Technique of Aluminium: Mechanical Properties and Surface Integrity. 10:902. 2017
- On the Role of Processing Parameters in Producing Recycled Aluminum AA6061 Based Metal Matrix Composite (MMC-AlR) Prepared Using Hot Press Forging (HPF) Process. 10:1098. 2017
- Outdoor Performance Analysis of a Photovoltaic Thermal (PVT) Collector with Jet Impingement and Compound Parabolic Concentrator (CPC). 10:888. 2017