Ya, Hamdan Bin

Ya, Hamdan Bin

Assoc. Prof. Ir. Dr.

Positions

Member, Centre of Flow Assurance , Institute of Sustainable Energy & Resources
Associate Professor, Mechanical Engineering Department , Faculty of Engineering
Associate Professor, Universiti Teknologi PETRONAS 2013 -

overview

Assoc. Prof. Ir Dr Hamdan bin Ya is experienced academician with a demonstrated history of working in the higher education industry. Skilled in impact engineering on type IV pressure vessel. Strong education professional with PhD in Impact Engineering on Composite Pipe (Applied Mechanics) by The University of Manchester.

member of

Mechanical Engineering Department

selected publications

academic article
- Evaluation on the impact behavior of stir-casted Aluminum composites reinforced with SiC and Gr for lightweight applications. Journal of Physics: Conference Series. 2688:012004. 2024
- Impact response of filament-wound structure with polymeric liner: Experimental and numerical investigation (Part-A). Results in Engineering. 21:101730. 2024
- Influence of winding angles on hoop stress in composite pressure vessels: Finite element analysis. Results in Engineering. 21:101667. 2024
- Tribological and morphological properties of bentonite nano‐clay/CaCO₃ reinforced high‐density polyethylene nanocomposites. Polymer Composites. 45:2063-2079. 2024
- A Review on Green Cooling: Exploring the Benefits of Sustainable Energy-Powered District Cooling with Thermal Energy Storage. Sustainability. 15:5433. 2023
- Advancements in aluminum matrix composites reinforced with carbides and graphene: A comprehensive review. Nanotechnology Reviews. 12. 2023
- Erosion impact on mild steel elbow pipeline for different orientations under liquid-gas-sand annular flow. Engineering Failure Analysis. 153:107565. 2023
- Investigating the Microhardness Behavior of Al6061/TiC Surface Composites Produced by Friction Stir Processing. International Journal of Computational Methods and Experimental Measurements. 11:157-161. 2023
- Application of Filament Winding Technology in Composite Pressure Vessels and Challenges: A Review. Journal of Energy Storage. 49:103468. 2022
- Artificial Neural Network Modeling to Predict the Effect of Milling Time and TiC Content on the Crystallite Size and Lattice Strain of Al7075-TiC Composites Fabricated by Powder Metallurgy. Crystals. 12:372. 2022
- Influence of Elbow Angle on Erosion-Corrosion of 1018 Steel for Gas–Liquid–Solid Three Phase Flow. Materials. 15:3721. 2022
- Influence of aluminum addition on the mechanical properties of brass/Al composites fabricated by stir casting. Materials Today: Proceedings. 48:811-814. 2022
- A Preliminary Numerical Investigation of Thermal Mixing Efficiency in T-Junctions with Different Flow Configurations. International Journal of Heat and Technology. 39:1590-1600. 2021
- A comparative approach in the utilisation of rice husk and empty palm bunch in the biomass boiler. IOP Conference Series: Earth and Environmental Science. 897:012011. 2021
- A comparative study of impact effect of composite cylinders and type IV pressure vessels. Emerging Materials Research. 10:206-217. 2021
- A review on the characteristic of biomass and classification of bioenergy through direct combustion and gasification as an alternative power supply. Journal of Physics: Conference Series. 1831:012033. 2021
- Effect of winding orientation on energy absorption and failure modes of filament wound kenaf/glass fibre reinforced epoxy hybrid composite tubes under intermediate-velocity impact (IVI) load. Journal of Materials Research and Technology. 10:1-14. 2021
- Experimental investigation on the effects of glass fiber hybridization on the low-velocity impact response of filament-wound carbon-based composite pipes. Polymers and Polymer Composites. 29:829-841. 2021
- Investigating the effect of mixing time on the crystallite size and lattice strain of the AA7075/TiC composites. Materialwissenschaft und Werkstofftechnik. 52:1112-1120. 2021
- Life Cycle Assessment of a Vapor Compression Cooling System Integrated within a District Cooling Plant. Sustainability. 13:11940. 2021
- Macroscale assessment of low‐velocity impact on hybrid composite laminates. Materialwissenschaft und Werkstofftechnik. 52:1101-1111. 2021
- Modeling, Optimization and Performance Evaluation of TiC/Graphite Reinforced Al 7075 Hybrid Composites Using Response Surface Methodology. Materials. 14:4703. 2021
- Simulation Analysis of Thermal Mixing Characteristics of Fluids Flowing Through a Converging T-junction. CFD Letters. 13:28-41. 2021
- The Utilisation of Palm Oil and Oil Palm Residues and the Related Challenges as a Sustainable Alternative in Biofuel, Bioenergy, and Transportation Sector: A Review. Sustainability. 13:3110. 2021
- Crashworthiness performance of hybrid kenaf/glass fiber reinforced epoxy tube on winding orientation effect under quasi-static compression load. Defence Technology. 16:1051-1061. 2020
- EXPERIMENTAL CHARACTERIZATION OF COMPRESSION PERFORMANCE OF CARBON-BASALT HYBRID FILAMENT WOUND PIPES BEFORE AND AFTER IMPACT. Composites: Mechanics, Computations, Applications: An International Journal. 11:25-38. 2020
- Effect of Sand Fines Concentration on the Erosion-Corrosion Mechanism of Carbon Steel 90° Elbow Pipe in Slug Flow. Materials. 13:4601. 2020
- Influence of Sand Fines Transport Velocity on Erosion-Corrosion Phenomena of Carbon Steel 90-Degree Elbow. Metals. 10:626. 2020
- Modelling and optimisation of hardness behaviour of sintered Al/SiC composites using RSM and ANN: a comparative study. Journal of Materials Research and Technology. 9:14036-14050. 2020
- Pseudo-Ductility, Morphology and Fractography Resulting from the Synergistic Effect of CaCO3 and Bentonite in HDPE Polymer Nano Composite. Materials. 13:3333. 2020
- Static and stability analysis of partial slip texture multi-lobe journal bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 234:567-587. 2020
- Sugar palm (Arenga pinnata [Wurmb.] Merr) starch films containing sugar palm nanofibrillated cellulose as reinforcement: Water barrier properties. Polymer Composites. 41:459-467. 2020
- The crashworthiness performance of stacking sequence on filament wound hybrid composite energy absorption tube subjected to quasi-static compression load. Journal of Materials Research and Technology. 9:654-666. 2020
- An Experimental Study on the Erosion-Corrosion Performance of AISI 1018 Carbon Steel and AISI 304L Stainless Steel 90-Degree Elbow Pipe. Metals. 9:1260. 2019
- Analysis of magnetohydrodynamic partial slip laser bump texture slider and journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 233:1921-1938. 2019
- Effects of Carbon Fiber Hybridization on the Compressive Strength of Glass-Carbon/Epoxy Hybrid Composite Pipes before and after Low Velocity Impact. Key Engineering Materials. 796:30-37. 2019
- Erosion–Corrosion of 30°, 60°, and 90° Carbon Steel Elbows in a Multiphase Flow Containing Sand Particles. Materials. 12:3898. 2019
- Numerical Investigation of the Influence of Sand Particle Concentration on Long Radius Elbow Erosion for Liquid-Solid Flow. International Journal of Engineering. 32. 2019
- Techno Economic Evaluation of Cold Energy from Malaysian Liquefied Natural Gas Regasification Terminals. Energies. 12:4475. 2019
- A Preliminary Experimental Investigation of Wet Fine Erosion in Two-Phase Flow. IOP Conference Series: Materials Science and Engineering. 328:012023. 2018
- Experimental Study of Low Velocity Impact Response of Carbon/Basalt Hybrid Filament Wound Composite Pipes. International Journal of Structural Stability and Dynamics. 18:1850089. 2018
- Hybrid reinforced thermoset polymer composite in energy absorption tube application: A review. Defence Technology. 14:291-305. 2018
- Performance Analysis of Grooved Hydrodynamic Journal Bearing with Multi-Depth Textured Surface. International Journal of Vehicle Structures and Systems. 10. 2018
- Comparison of Energy Absorption of Aluminium-composite Tubes Subjected to Axial Loading. IOP Conference Series: Materials Science and Engineering. 205:012020. 2017
- Experimental Investigation of Energy Absorption of ‎Partially Wrapped Thin-Walled ‎Aluminium-Glass/Epoxy Tube Subjected to Quasi-Static Loading. Materials Science Forum. 904:61-67. 2017
- Linear stability analysis of short journal bearing with an axial groove. Materialwissenschaft und Werkstofftechnik. 48:210-217. 2017
- The effect of fiber angles on energy absorption of 50 % partially wrapped aluminium‐composite hybrid tube under axial crushing. Materialwissenschaft und Werkstofftechnik. 48:267-272. 2017
- Collapsed Mode and Specific Energy Absorption of Glass Filled Polypropylene (GPE) and Glass Filled Polyethylene (GPP) Composite Pipes under Quasi-Static Axial Loading. Key Engineering Materials. 673:141-149. 2016
- AN EXPERIMENTAL STUDY ON THE BEHAVIOUR OF GLASS FILLED POLYPROPYLENE AND POLYETHYLENE COMPOSITE PIPES UNDER QUASI-STATIC AXIAL LOADING. Jurnal Teknologi. 74. 2015
chapter
- Analysis of Optimally Tuned Active Dynamic Vibration Absorber. Lecture Notes in Mechanical Engineering. 455-462. 2023
- Growth of NGVs and Comparative Study of Cylinder Material for CNG Storage. Lecture Notes in Mechanical Engineering. 689-704. 2023
- Life Cycle Assessment and Economic Analysis of a Vapor Compression System Integrated with a Large District Cooling Plant. Lecture Notes in Mechanical Engineering. 427-437. 2023
- The Study of Pseudo-ductile Polymer Nano Composite Reinforced with Non-treated Inorganic Nanofillers. Lecture Notes in Mechanical Engineering. 981-992. 2023
- Recent Advancements in Advanced Composites for Aerospace Applications: A Review. Advanced Composites in Aerospace Engineering Applications. 319-339. 2022
- Application of biocomposites in automotive components: A review. Biocomposite and Synthetic Composites for Automotive Applications. 1-17. 2021
- Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering. 217-225. 2021
- An Overview: Mechanical and Wear Properties of HDPE Polymer Nanocomposites Reinforced with Treated/Non-treated Inorganic Nanofillers. Lecture Notes in Mechanical Engineering. 231-241. 2020
- Experimental Investigations on the Surface Hardness of Synthesized Polystyrene/ZnO Nanocomposites. Lecture Notes in Mechanical Engineering. 345-352. 2020
- Influence of Elbow Orientation on Solid Particle Erosion for Multiphase Flow. Lecture Notes in Mechanical Engineering. 695-701. 2020
- Investigation of Maximum Erosion Zone in the Horizontal 90° Elbow. Lecture Notes in Mechanical Engineering. 223-230. 2020
- Numerical Investigation of Sand Particle Erosion in Long Radius Elbow for Multiphase Flow. Advances in Material Sciences and Engineering. 41-49. 2020
- Prospect of Composite Tubes Based on Bi-materials for Weight Reduction of Vehicles. Energy Efficiency in Mobility Systems. 27-51. 2020
- Experimental Study on Electrical Power Generation from a 1-kW Engine Using Simulated Biogas Fuel. Rotating Machineries. 93-104. 2019
conference paper
- A Review of Recent Studies of Dynamometers for Cutting Force Measurement in Machining Processes 2021
- Desıgn and development of casted staın less steel Y-Tee joınt for oıl and gas applıcatıon. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2018
- Effects of fluoropolymer and calcium stearate on melt flow index and mechanical properties of high-density polyethylene. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2018
- Experimental study on the impact of wet sand particle to the erosion of carbon steel and HDPE. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2018
- Investigation on Erosion Due to Fine Particles in Multiphase Flow 2018
- Simulation study on impact of fine sand particle to 90° steel elbow in pipe. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2018
- Burst pressure investigation of filament wound type IV composite pressure vessel. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2017
- Effect of composite layers on partially wrapped Al-glass/epoxy hybrid tube subjected to axial load. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2017

education and training

Ph.D. in Impact Engineering on Composite Pipe (Applied Mechanics), The University of Manchester 2007
B.E. in Mechanical Engineering, Institut Teknologi Mara 1992
Institut Teknologi Mara 1988

full name

Hamdan Bin Ya

primary email

hamdan.ya@utp.edu.my

webpage

Publications in VIVO

Co-author Network

Contact Info

hamdan.ya@utp.edu.my

Websites