publication venue for
- Cohesive approach for determining porosity and P-impedance in carbonate rocks using seismic attributes and inversion analysis. 14:1173-1187. 2024
- Revolutionizing shale drilling with potassium chloride-based natural deep eutectic solvent as an additive. 14:85-105. 2024
- Sand screen selection by sand retention test: a review of factors affecting sand control design 2024
- Utilization of machine learning for the estimation of production rates in wells operated by electrical submersible pumps. 14:1205-1233. 2024
- Application of machine learning to determine the shear stress and filtration loss properties of nano-based drilling fluid. 13:1031-1052. 2023
- Physical and chemical effect of impurities in carbon capture, utilisation and storage. 13:1235-1246. 2023
- A mathematical model for estimating effective stimulated reservoir volume. 12:1775-1784. 2022
- A review: the utilization potency of biopolymer as an eco-friendly scale inhibitors. 12:1075-1094. 2022
- Application of benchtop humidity and temperature chamber in the measurement of water vapor sorption in US shales from Mancos, Marcellus, Eagle Ford and Wolfcamp formations. 12:2679-2689. 2022
- Correction to: Rheological characterization of potassium carbonate deep eutectic solvent (DES) based drilling mud. 12:2883-2885. 2022
- Effects of imidazolium- and ammonium-based ionic liquids on clay swelling: experimental and simulation approach. 12:1841-1853. 2022
- Erosion of sand screens by solid particles: a review of experimental investigations. 12:2329-2345. 2022
- Evaluating the influence of graphene nanoplatelets on the performance of invert emulsion drilling fluid in high-temperature wells. 12:2467-2491. 2022
- Experimental investigation of the effects of temperature on the morphological characteristics of geopolymer binders. 12:3303-3310. 2022
- Experimental study of CO2 injectivity impairment in sandstone due to salt precipitation and fines migration. 12:2191-2202. 2022
- Experimental study on the performance of emulsions produced during ASP flooding. 12:1797-1809. 2022
- Experimental study on water-based mud: investigate rheological and filtration properties using cupressus cones powder. 12:2699-2709. 2022
- High strength glass beads coated with CNT/rGO incorporated urethane coating for improved crush resistance for effective hydraulic fracturing. 12:2691-2697. 2022
- Improved water saturation estimation in shaly sandstone through variable cementation factor. 12:1329-1339. 2022
- Influence of alkyl chain length in ionic liquid based drilling mud for rheology modification: a review. 12:485-492. 2022
- Inhibiting wax deposition using palm oil additives. 12:99-115. 2022
- Investigation on esterified pectin as natural hydrate inhibitor on methane hydrate formation. 12:3003-3019. 2022
- Modelling the transient effect in naturally fractured reservoirs. 12:2663-2678. 2022
- Polysaccharides from Tamarindus indica L. as natural kinetic hydrates inhibitor at high subcooling environment. 12:2711-2722. 2022
- Review of pseudo-three-dimensional modeling approaches in hydraulic fracturing. 12:1095-1107. 2022
- Rheological characterization of potassium carbonate deep eutectic solvent (DES) based drilling mud. 12:1785-1795. 2022
- The influence of palm oil additives on the pour point and wax deposition tendencies of Chenor crude oil. 12:589-599. 2022
- Evaluation of anionic and non-ionic surfactant performance for Montney shale gas hydraulic fracturing fluids. 11:1973-1991. 2021
- Evaluation of drilling muds enhanced with modified starch for HPHT well applications. 11:203-218. 2021
- Quantification method of suspended solids in micromodel using image analysis. 11:2271-2286. 2021
- Seismic expression of miocene carbonate platform and reservoir characterization through geophysical approach: application in central Luconia, offshore Malaysia. 11:1533-1544. 2021
- Surfactant screening to generate strong foam with formation water and crude oil. 11:3521-3532. 2021
- The rheological behavior of crude oil in the presence of palm oil additives. 11:2833-2843. 2021
- A comparative study of dynamic adsorption of anionic synthetic and nanocellulose-based surfactant in Malaysian reservoir. 10:311-318. 2020
- A comparison of foam stability at varying salinities and surfactant concentrations using bulk foam tests and sandpack flooding. 10:271-282. 2020
- A critical review of development and demulsification mechanisms of crude oil emulsion in the petroleum industry. 10:1711-1728. 2020
- Application of variance-based sensitivity analysis in modeling oil well productivity and injectivity. 10:729-738. 2020
- Artificial neural network model for predicting the density of oil-based muds in high-temperature, high-pressure wells. 10:1081-1095. 2020
- Effect of hydrate anti-agglomerants on water-in-crude oil emulsion stability. 10:139-148. 2020
- Evaluation of new surfactants for enhanced oil recovery applications in high-temperature reservoirs. 10:283-296. 2020
- Experimental study of nanoparticles as catalyst in enhancing matrix acidizing for carbonate reservoir. 10:1145-1153. 2020
- Graphene oxide/carbon nanotubes nanocoating for improved scale inhibitor adsorption ability onto rock formation. 10:149-157. 2020
- Impact of wet supercritical CO2 injection on fly ash geopolymer cement under elevated temperatures for well cement applications. 10:243-247. 2020
- Investigation of different environmental-friendly waste materials as lost circulation additive in drilling fluids. 10:233-242. 2020
- Investigation on the effect of changing rotary speed and weight bit on PCD cutter wear. 10:1063-1068. 2020
- Mechanical earth modeling and sand onset production prediction for Well X in Malay Basin. 10:2753-2758. 2020
- Modified approach for identifying weak zones for effective sand management. 10:537-555. 2020
- Nano-fluid viscosity screening and study of in situ foam pressure buildup at high-temperature high-pressure conditions. 10:1115-1126. 2020
- Numerical modeling on drilling fluid and cutter design effect on drilling bit cutter thermal wear and breakdown. 10:959-968. 2020
- Performance of surfactant blend formulations for controlling gas mobility and foam propagation under reservoir conditions. 10:3961-3969. 2020
- The effect of surfactant concentration, salinity, temperature, and pH on surfactant adsorption for chemical enhanced oil recovery: a review. 10:125-137. 2020
- The study of the effect of fault transmissibility on the reservoir production using reservoir simulation—Cornea Field, Western Australia. 10:739-753. 2020
- Uniaxial compressive strength of geopolymer cement for oil well cement. 10:67-70. 2020
- Water alternating gas incremental recovery factor prediction and WAG pilot lessons learned. 10:249-269. 2020
- A rigorous approach to analyze bulk and coreflood foam screening tests. 9:809-822. 2019
- A rigorous approach to analyze bulk and coreflood foam screening tests. 9:809-822. 2019
- Assessing the application of miscible CO2 flooding in oil reservoirs: a case study from Pakistan. 9:685-701. 2019
- Correction to: Experimental investigation of high-viscosity oil–water flow in vertical pipes: flow patterns and pressure gradient. 9:2919-2919. 2019
- Development of an integrated RFID-IC technology for on-line viscosity measurements in enhanced oil recovery processes. 9:2605-2612. 2019
- Electromagnetic waves-induced hydrophobic multiwalled carbon nanotubes for enhanced oil recovery. 9:2667-2670. 2019
- Experimental investigation of high-viscosity oil–water flow in vertical pipes: flow patterns and pressure gradient. 9:2911-2918. 2019
- Gelation behavior as a function of concentration of sodium thiosulfate for PAM gels cross-linked with chromium. 9:1539-1546. 2019
- Gelation behavior as a function of concentration of sodium thiosulfate for PAM gels cross-linked with chromium. 9:1539-1546. 2019
- Influence of lauryl betaine on aqueous solution stability, foamability and foam stability. 9:2659-2665. 2019
- Novel approach for predicting water alternating gas injection recovery factor. 9:2893-2910. 2019
- Synthesis and evaluation of Jatropha oil-based emulsified acids for matrix acidizing of carbonate rocks. 9:1119-1133. 2019
- Well connection optimization in integrated subsurface and surface facilities: an industrial case study. 9:2921-2926. 2019
- Comparison of neuro-fuzzy network and response surface methodology pertaining to the viscosity of polymer solutions. 8:887-900. 2018
- Integrated 3D facies modeling of the Mangahewa Formation, Maui Gas Field, Taranaki Basin, New Zealand. 8:1017-1049. 2018
- 2D and 3D seismic simulation for fault modeling: exploratory revision from the Gullfaks field. 7:417-432. 2017
- Experimental investigation of the effect of different process variables on the viscosity of sulfonated polyacrylamide copolymers. 7:87-101. 2017
- Impact of new foam surfactant blend with water alternating gas injection on residual oil recovery. 7:843-851. 2017
- Impact of new foam surfactant blend with water alternating gas injection on residual oil recovery. 7:843-851. 2017
- Study of blended surfactants to generate stable foam in presence of crude oil for gas mobility control. 7:77-85. 2017
- Green silica scale inhibitors for Alkaline-Surfactant-Polymer flooding: a review. 6:379-385. 2016
- Wellbore stability model based on iterative coupling method in water alternating gas injection. 6:755-775. 2016
- Development of mathematical model for hydraulic fracturing design. 5:269-276. 2015
- Strength prediction of Class G oilwell cement during early ages by electrical conductivity. 3:303-311. 2013
- The effect of a new in situ precipitation inhibitor on chemical EOR. 3:133-137. 2013
- An experimental study on ASP process using a new polymeric surfactant. 2:223-227. 2012