publication venue for
- Enhancing the mechanical and environmental performance of engineered cementitious composite with metakaolin, silica fume, and graphene nanoplatelets. 404:133187. 2023
- Predicting the rutting parameters of nanosilica/waste denim fiber composite asphalt binders using the response surface methodology and machine learning methods. 363:129871. 2023
- Comparison of Response Surface Methodology and Artificial Neural Network approach in predicting the performance and properties of palm oil clinker fine modified asphalt mixtures. 324:126618. 2022
- The Strength and Thermal Properties of Concrete containing Water Absorptive Aggregate from Well-Graded Bottom Ash (BA) as Partial Sand Replacement. 339:127658. 2022
- Utilization of palm oil and its by-products in bio-asphalt and bio-concrete mixtures: A review. 337:127552. 2022
- Design optimization and statistical modeling of cementitious grout containing irradiated plastic waste and silica fume using response surface methodology. 271:121504. 2021
- Effects of petroleum sludge ash in fly ash-based geopolymer mortar. 272:121939. 2021
- Investigating the mechanical properties and fuel spillage resistance of semi-flexible pavement surfacing containing irradiated waste PET based grouts. 304:124641. 2021
- Modeling and design optimization of reclaimed asphalt pavement containing crude palm oil using response surface methodology. 291:123288. 2021
- Modeling and optimization of mixing parameters using response surface methodology and characterization of palm oil clinker fine modified bitumen. 298:123849. 2021
- Modelling and optimization of the mechanical properties of engineered cementitious composite containing crumb rubber pretreated with graphene oxide using response surface methodology. 310:125259. 2021
- Physicochemical, rheological and microstructural properties of Nano-Silica modified Bio-Asphalt. 297:123772. 2021
- Physicochemical, rheological and morphological properties of bitumen incorporating petroleum sludge. 297:123738. 2021
- Utilizing of oil shale ash as a construction material: A systematic review. 299:123844. 2021
- Development of response surface models for self-compacting hybrid fibre reinforced rubberized cementitious composite. 232:117191. 2020
- Effect of paste aggregate ratio and curing methods on the performance of one-part alkali-activated concrete. 261:120024. 2020
- Flexural behavior of rubberized concrete interlocking masonry walls under out-of-plane load. 263:120661. 2020
- Investigating the effects of NaOH molarity and the geometry of PVA fibers on the post-cracking and the fracture behavior of engineered geopolymer composite. 265:120295. 2020
- Modeling and optimization of mixing conditions for petroleum sludge modified bitumen using response surface methodology. 264:120701. 2020
- An investigation on thermal performance of wollastonite and bentonite reinforced intumescent fire-retardant coating for steel structures. 228:116734. 2019
- Bond behaviour of nano-silica-modified self-compacting engineered cementitious composite using response surface methodology. 224:796-814. 2019
- Effects of elevated temperature on the tensile properties of NS-modified self-consolidating engineered cementitious composites and property optimization using response surface methodology (RSM). 206:449-469. 2019
- Emerging sustainable solutions for depollution: Geopolymers. 199:540-548. 2019
- Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology. 225:776-787. 2019
- Dielectric properties for characterization of fly ash-based geopolymer binders. 189:19-32. 2018
- Dielectric properties for characterization of fly ash-based geopolymer binders. 189:19-32. 2018
- Effective bond length of CFRP sheets externally bonded to concrete beams under marine environment. 167:726-738. 2018
- Effects of used engine oil on slump, compressive strength and oxygen permeability of normal and blended cement concrete. 187:178-184. 2018
- Investigating the effects of solarcure curing method on the compressive strength, microstructure and polymeric reaction of fly ash based geopolymer. 181:227-237. 2018
- Mechanical performance of roller compacted concrete pavement containing crumb rubber and nano silica. 159:234-251. 2018
- Mechanical properties and performance of high volume fly ash roller compacted concrete containing crumb rubber and nano silica. 171:521-538. 2018
- Optimization of hybrid fibres in engineered cementitious composites. 190:24-37. 2018
- The influence of high temperature on microstructural damage and residual properties of nano-silica-modified (NS-modified) self-consolidating engineering cementitious composites (SC-ECC) using response surface methodology (RSM). 192:450-466. 2018
- Calcined kaolin as cement replacing material and its use in high strength concrete. 81:313-323. 2015
- Statistical models for concrete containing wood chipping as partial replacement to fine aggregate. 55:13-19. 2014
- Effects of micro-structure characteristics of interfacial transition zone on the compressive strength of self-compacting geopolymer concrete. 41:91-98. 2013
- One way RC wall panels with openings strengthened with CFRP. 40:575-583. 2013
- Mix proportioning of concrete containing paper mill residuals using response surface methodology. 35:63-68. 2012
- The effect of microwave incinerated rice husk ash on the compressive and bond strength of fly ash based geopolymer concrete. 36:695-703. 2012
- Analytical and experimental studies on composite slabs utilising palm oil clinker concrete. 25:3550-3560. 2011
- Development of an automatic torque test to measure the shear bond strength between asphalt. 25:623-629. 2011
- Evaluation of rubbercrete based on ultrasonic pulse velocity and rebound hammer tests. 25:1388-1397. 2011
- Mechanical and durability properties of concretes containing paper-mill residuals and fly ash. 25:717-725. 2011
- Structural behavior and m–k value of composite slab utilizing concrete containing crumb rubber. 24:1214-1221. 2010
- Shear bond strength between asphalt layers for laboratory prepared samples and field cores. 23:2251-2258. 2009