publication venue for
- A systematic review of photovoltaic/thermal applications in heat pumps systems. 269:112299. 2024
- Evaluating the techno-economic viability of different solar collectors integrated into an adsorption cooling system in tropical climate conditions. 268:112304. 2024
- Automotive cabin soak temperature control strategies for improved safety, comfort and fuel efficiency: A review. 259:416-436. 2023
- Corrigendum to “Dust accumulation and aggregation on PV panels: An integrated survey on impacts, mathematical models, cleaning mechanisms, and possible sustainable solution” [Solar Energy 251 (2023) 261–285]. 259:277. 2023
- Dust accumulation and aggregation on PV panels: An integrated survey on impacts, mathematical models, cleaning mechanisms, and possible sustainable solution. 251:261-285. 2023
- Effect of dust and cleaning methods on mono and polycrystalline solar photovoltaic performance: An indoor experimental study. 236:626-643. 2022
- Energy management strategy of hybrid solar-hydro system with various probabilities of power supply loss. 233:230-245. 2022
- Lead free efficient perovskite solar cell device Optimization and defect study using Mg doped CuCrO2 as HTL and WO3 as ETL. 243:215-224. 2022
- Solar energy desalination distillate yield and cost evolution, and statistical relationship between meteorological variables and distillate yield. 246:256-272. 2022
- Study on the interface defects of eco-friendly perovskite solar cells. 247:96-108. 2022
- Controlling the melting and solidification points temperature of PCMs on the performance and economic return of the water-cooled photovoltaic thermal system. 224:1344-1357. 2021
- Effects of oxygen concentration variation on the structural and optical properties of reactive sputtered WOx thin film. 222:202-211. 2021
- Energetic and exergetic analysis of a new double pass solar air collector with fins and phase change material. 226:260-271. 2021
- Performance investigation of inclined CPV system with composites of PCM, metal foam and nanoparticles. 230:883-901. 2021
- Thermal performance of jet-impingement solar air heater with transverse ribs absorber plate. 214:355-366. 2021
- A novel model and experimental validation of dust impact on grid-connected photovoltaic system performance in Northern Oman. 206:564-578. 2020
- Efficiency enhancement of CIGS solar cell by WS2 as window layer through numerical modelling tool. 207:479-485. 2020
- Evaluation and comparison of different flow configurations PVT systems in Oman: A numerical and experimental investigation. 208:58-88. 2020
- Evaluation of aging and performance of grid-connected photovoltaic system northern Oman: Seven years’ experimental study. 207:1247-1258. 2020
- Performance optimization of a hybrid PV/T solar system using Soybean oil/MXene nanofluids as A new class of heat transfer fluids. 208:124-138. 2020
- Solvent exfoliated graphene incorporated mixed phase TiO2 transparent photoelectrode for the efficient and color transparent dye-sensitized solar cell. 206:317-329. 2020
- Thermal performance enhancement of a flat plate solar collector using hybrid nanofluid. 204:208-222. 2020
- A performance and technoeconomic study of different geometrical designs of compact single-pass cross-matrix solar air collector with square-tube absorbers. 178:314-330. 2019
- Assessment of standalone solar PV-Battery system for electricity generation and utilization of excess power for water pumping. 194:766-776. 2019
- Elucidating the role of interfacial MoS2 layer in Cu2ZnSnS4 thin film solar cells by numerical analysis. 178:162-172. 2019
- Energy and exergy analysis of two novel hybrid solar photovoltaic geothermal energy systems incorporating a building integrated photovoltaic thermal system and an earth air heat exchanger system. 188:83-95. 2019
- Environmental performance of window-integrated systems using dye-sensitised solar module technology in Malaysia. 187:379-392. 2019
- Fabrication of Cu2SnS3 thin film solar cells by sulphurization of sequentially sputtered Sn/CuSn metallic stacked precursors. 177:262-273. 2019
- Modeling and experimental validation of a PVT system using nanofluid coolant and nano-PCM. 177:178-191. 2019
- Red-mud geopolymer composite encapsulated phase change material for thermal comfort in built-sector. 181:464-474. 2019
- Comparison of prediction methods of PV/T nanofluid and nano-PCM system using a measured dataset and artificial neural network. 162:378-396. 2018
- Energy and exergy analyses of photovoltaic thermal collector with ∇-groove. 159:742-750. 2018
- Performance and economic analyses on solar-assisted heat pump fluidised bed dryer integrated with biomass furnace for rice drying. 174:1058-1067. 2018
- Synthesis of sphere-like-crystal CdS powder and thin films using chemical residue in chemical bath deposition (CBD) for thin film solar cell application. 173:120-125. 2018
- Experimental and computational study of melting phase-change material in a triplex tube heat exchanger with longitudinal/triangular fins. 155:142-153. 2017
- Experimental evaluation of single stage ejector-absorption cooling cycle under different design configurations. 155:130-141. 2017
- Experimental investigation of jet array nanofluids impingement in photovoltaic/thermal collector. 144:321-334. 2017
- Optimal sizing of stand-alone photovoltaic system by minimizing the loss of power supply probability. 150:220-228. 2017
- PV panel modeling with improved parameter extraction technique. 153:519-530. 2017
- Performance analysis of a multi-pass solar thermal collector system under transient state assisted by porous media. 158:782-791. 2017
- Performance enhancement of free convective solar air heater by pin protrusions on the absorber. 151:173-185. 2017
- Performance enhancement of photovoltaic grid-connected system using PVT panels with nanofluid. 150:38-48. 2017
- Application of graphene in dye and quantum dots sensitized solar cell. 137:531-550. 2016
- Comparison of solar dryer and solar-assisted heat pump dryer for cassava. 136:606-613. 2016
- Performance of a solar-assisted solid desiccant dryer for oil palm fronds drying. 132:415-429. 2016
- Prospects and challenges of perovskite type transparent conductive oxides in photovoltaic applications. Part I – Material developments. 137:371-378. 2016
- Prospects and challenges of perovskite type transparent conductive oxides in photovoltaic applications. Part II – Synthesis and deposition. 139:309-317. 2016
- An improved design of photovoltaic/thermal solar collector. 122:885-891. 2015
- Performance of a solar assisted solid desiccant dryer for kenaf core fiber drying under low solar radiation. 112:194-204. 2015
- Performance analysis of solar drying system for red chili. 99:47-54. 2014
- Evaluation of adding flash tank to solar combined ejector–absorption refrigeration system. 91:283-296. 2013
- Measurements of spectral-band solar irradiance in Bangi, Malaysia. 89:62-80. 2013
- An intelligent method for sizing optimization in grid-connected photovoltaic system. 86:2067-2082. 2012
- Performance analysis of solar-assisted chemical heat-pump dryer. 84:1920-1928. 2010
- pn Junction depth impact on short circuit current of solar cell. 83:1629-1633. 2009