placeholder image

Abdul Rani, Ahmad Majdi Bin

Assoc. Prof. Dr.

Positions

Member, Center of Sustainable Resources for Intelligent and Efficient Mobility , Institute of Smart & Sustainable Living
Associate Professor, Mechanical Engineering Department , Faculty of Engineering
Associate Professor, Universiti Teknologi PETRONAS 2011 -

overview

Dr Ahmad Majdi bin Abdul Rani works as a Associate Professor at Universiti Teknologi PETRONAS, Department of Mechanical Engineering. His specialization advanced Manufacturing, Bio-devices manufacturing, Surface modification using PM-EDM technique, Additive manufacturing (3D printing and reversed engineering), PDC drill bit design and analysis, Oil and Gas Valves design and analysis. His working experience from 1984 untill now.

member of

Mechanical Engineering Department

selected publications

academic article
- Ergonomic principles of road signs comprehension: A literature review. Transportation Research Part F: Traffic Psychology and Behaviour. 101:279-305. 2024
- Investigating surface integrity, corrosion resistance and biocompatibility of 316L steel using carbon nanotube-assisted EDM process. Results in Engineering. 21:101698. 2024
- A Review of Electrode Manufacturing Methods for Electrical Discharge Machining: Current Status and Future Perspectives for Surface Alloying. Machines. 11:906. 2023
- Deposition of biomimetic biocompatible oxides on metallic glass surface by electro‐discharge coating process. Materialwissenschaft und Werkstofftechnik. 54:129-136. 2023
- Elucidating Powder-Mixed Electric Discharge Machining Process, Applicability, Trends and Futuristic Perspectives. Machines. 11:381. 2023
- Improvement in 316L steel surface features, corrosion and biocompatibility through novel CNT-assisted hydroxyapatite powder mixed-EDM process. Applied Physics A. 129:501. 2023
- Investigation of coated 316L steel surface employing carbon nanotubes mixed-electrical discharge machining for biomedical applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 095440892311750. 2023
- Optimization of hydroxyapatite powder mixed electric discharge machining process to improve modified surface features of 316L stainless steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 237:881-895. 2023
- Properties and tribological evaluation of graphene and fullerene nanoparticles as additives in oil lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 237:1647-1656. 2023
- A review on the corrosion resistance of electroless Ni-P based composite coatings and electrochemical corrosion testing methods. Corrosion Reviews. 40:1-37. 2022
- Enhanced machining features and multi-objective optimization of CNT mixed-EDM process for processing 316L steel. The International Journal of Advanced Manufacturing Technology. 120:6125-6141. 2022
- Evaluation of modified 316L surface properties through HAp suspended EDM process for biomedical application. Surfaces and Interfaces. 28:101600. 2022
- Investigation of machining and modified surface features of 316L steel through novel hybrid of HA/CNT added-EDM process. Materials Chemistry and Physics. 276:125320. 2022
- Material independent effectiveness of workpiece vibration in μ-EDM drilling. Journal of Materials Research and Technology. 18:531-546. 2022
- Microstructure and Mechanical Properties of Modified 316L Stainless Steel Alloy for Biomedical Applications Using Powder Metallurgy. Materials. 15:2822. 2022
- Analysis and Evaluation of Optimized Lower Limb Prosthetic Device. Journal of Physics: Conference Series. 2051:012040. 2021
- Analysis of hybrid HA/CNT suspended-EDM process and multiple-objectives optimization to improve machining responses of 316L steel. Journal of Materials Research and Technology. 15:2557-2574. 2021
- Development and Investigation of an Inexpensive Low Frequency Vibration Platform for Enhancing the Performance of Electrical Discharge Machining Process. Materials. 14:6192. 2021
- Investigation of Coatings, Corrosion and Wear Characteristics of Machined Biomaterials through Hydroxyapatite Mixed-EDM Process: A Review. Materials. 14:3597. 2021
- Modelling and optimization of microhardness of electroless Ni–P–TiO2 composite coating based on machine learning approaches and RSM. Journal of Materials Research and Technology. 12:1010-1025. 2021
- Multi-objective optimization of process variables for MWCNT-added electro-discharge machining of 316L steel. The International Journal of Advanced Manufacturing Technology. 115:179-198. 2021
- Multiple-objective optimization of hydroxyapatite-added EDM technique for processing of 316L-steel. Materials and Manufacturing Processes. 1-12. 2021
- Simulation-enabled Design and Analysis of Globe Valve. Journal of Physics: Conference Series. 2051:012025. 2021
- Synthesis, Surface Nitriding and Characterization of Ti-Nb Modified 316L Stainless Steel Alloy Using Powder Metallurgy. Materials. 14:3270. 2021
- Assessment of PM-EDM cycle factors influence on machining responses and surface properties of biomaterials: A comprehensive review. Precision Engineering. 66:531-549. 2020
- Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review. Materials and Manufacturing Processes. 35:1157-1180. 2020
- Biocompatibility and corrosion resistance of metallic biomaterials. Corrosion Reviews. 38:381-402. 2020
- Electro-Discharge Machining of Zr67Cu11Ni10Ti9Be3: An Investigation on Hydroxyapatite Deposition and Surface Roughness. Processes. 8:635. 2020
- Investigation on the effect of changing rotary speed and weight bit on PCD cutter wear. Journal of Petroleum Exploration and Production Technology. 10:1063-1068. 2020
- Numerical modeling on drilling fluid and cutter design effect on drilling bit cutter thermal wear and breakdown. Journal of Petroleum Exploration and Production Technology. 10:959-968. 2020
- Optimization of Sintering Parameters of 316L Stainless Steel for In-Situ Nitrogen Absorption and Surface Nitriding Using Response Surface Methodology. Processes. 8:297. 2020
- Static and stability analysis of partial slip texture multi-lobe journal bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 234:567-587. 2020
- An Efficient Approach for Nitrogen Diffusion and Surface Nitriding of Boron-Titanium Modified Stainless Steel Alloy for Biomedical Applications. Metals. 9:755. 2019
- Analysis of magnetohydrodynamic partial slip laser bump texture slider and journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 233:1921-1938. 2019
- Characterization, adhesion strength and in-vitro cytotoxicity investigation of hydroxyapatite coating synthesized on Zr-based BMG by electro discharge process. Surface and Coatings Technology. 370:213-226. 2019
- Considerations of Material Selection for Control Rod Drive Mechanism of Reaktor Daya Eksperimental. Journal of Physics: Conference Series. 1198:032010. 2019
- Effect of Cryogenic Cooling on the Heat Transfer during Turning of AZ31C Magnesium Alloy. Heat Transfer Engineering. 40:1023-1032. 2019
- Hydroxyapatite Electro Discharge Coating of Zr-Based Bulk Metallic Glass for Potential Orthopedic Application. Key Engineering Materials. 796:123-128. 2019
- Squeeze Film Analysis of Three-layered Parallel Plate and Partial Journal Bearing Lubricated with Couple Stress Fluids for Skeletal Joint Applications. Materials Today: Proceedings. 15:328-335. 2019
- The Influence of Nitrogen Absorption on Microstructure, Properties and Cytotoxicity Assessment of 316L Stainless Steel Alloy Reinforced with Boron and Niobium. Processes. 7:506. 2019
- Additive Manufacturing Technology for Biomedical Components: A review. IOP Conference Series: Materials Science and Engineering. 328:012003. 2018
- An In-Depth Review on Direct Additive Manufacturing of Metals. IOP Conference Series: Materials Science and Engineering. 328:012005. 2018
- An environmental friendly model for materials substitution in a fiberglass reinforced polyester composite. MATEC Web of Conferences. 178:04013. 2018
- Controlling corrosion rate of Magnesium alloy using powder mixed electrical discharge machining. IOP Conference Series: Materials Science and Engineering. 344:012010. 2018
- Early Shear Failure Prediction in Incremental Sheet Forming Process Using FEM and ANN. IOP Conference Series: Materials Science and Engineering. 328:012031. 2018
- Effect of Unit Cell Type and Pore Size on Porosity and Mechanical Behavior of Additively Manufactured Ti6Al4V Scaffolds. Materials. 11:2402. 2018
- Effects Of Welding On The Fatigue Behaviour Of Commercial Aluminum AA-1100 Joints. IOP Conference Series: Materials Science and Engineering. 346:012065. 2018
- Experimental and Numerical Investigation of Six-Bar Linkage Application to Bellow Globe Valve for Compact Design. Applied Sciences. 8:1980. 2018
- Hydroxyapatite mixed-electro discharge formation of bioceramic Lakargiite (CaZrO₃) on Zr–Cu–Ni–Ti–Be for orthopedic application. Materials and Manufacturing Processes. 33:1734-1744. 2018
- Investigation of Boron addition and compaction pressure on the compactibility, densification and microhardness of 316L Stainless Steel. IOP Conference Series: Materials Science and Engineering. 344:012023. 2018
- Metal Injection Molding Process Parameters as A Function of Filling Performance of 3D Printed Polymer Mold. MATEC Web of Conferences. 225:06004. 2018
- Performance Analysis of Enhanced 3D Printed Polymer Molds for Metal Injection Molding Process. Metals. 8:433. 2018
- Study on the Effect of Diamond Grain Size on Wear of Polycrystalline Diamond Compact Cutter. IOP Conference Series: Materials Science and Engineering. 328:012004. 2018
- A Review of Additive Mixed-Electric Discharge Machining: Current Status and Future Perspectives for Surface Modification of Biomedical Implants. Advances in Materials Science and Engineering. 2017:1-23. 2017
- ADDITIVE MANUFACTURING DESIGN OF GLOBE VALVE FOR OPTIMIZED FLOW. Transactions of the Canadian Society for Mechanical Engineering. 41:717-723. 2017
- An overview on the conventional and nonconventional methods for manufacturing the metallic glasses. MATEC Web of Conferences. 112:03003. 2017
- Analysis of reconfigurable assembly system framing systems in automotive industry. MATEC Web of Conferences. 90:01047. 2017
- Improving EDM Process on AZ31 Magnesium Alloy towards Sustainable Biodegradable Implant Manufacturing. Procedia Manufacturing. 7:504-509. 2017
- Machined Surface Quality in Nano Aluminum Mixed Electrical Discharge Machining. Procedia Manufacturing. 7:510-517. 2017
- Optimization of bone drilling parameters using Taguchi method based on finite element analysis. IOP Conference Series: Materials Science and Engineering. 203:012016. 2017
- Parameter optimization and stretch enhancement of AISI 316 sheet using rapid prototyping technique. IOP Conference Series: Materials Science and Engineering. 257:012006. 2017
- Stability evaluation of three-layered journal bearing with slip/partial slip. Industrial Lubrication and Tribology. 69:334-341. 2017
- Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions. The International Journal of Advanced Manufacturing Technology. 91:2855-2868. 2017
- Analysis of Micropolar and Power Law Fluid–Lubricated Slider and Journal Bearing with Partial Slip–Partial Slip Texture Configuration. Tribology Transactions. 59:896-910. 2016
- Determining the effects of thermal conductivity on epoxy molds using profiled cooling channels with metal inserts. Journal of Mechanical Science and Technology. 30:4901-4907. 2016
- Early Mobilization Using Heat Treated Shape Memory Alloy (SMA) for Rehabilitation Phases. Key Engineering Materials. 724:112-116. 2016
- Electrical Discharge Machining on Biodegradable AZ31 Magnesium Alloy Using Taguchi Method. Procedia Engineering. 148:916-922. 2016
- Inverse Kinematics - Stewart Platform Actuated by Shape Memory Alloy for Immobilization of Ankle-Foot Rehabilitation. Key Engineering Materials. 724:105-111. 2016
- LOAD CAPACITY COEFFICIENT EVALUATION OF THREE-LAYERED JOURNAL BEARING WITH SLIP. Jurnal Teknologi. 78. 2016
- OPTIMIZATION OF ELECTRICAL DISCHARGE MACHINING PARAMETERS OF SISIC THROUGH RESPONSE SURFACE METHODOLOGY. Jurnal Teknologi. 79. 2016
- Stability analysis of double porous and surface porous layer journal bearing. Tribology - Materials, Surfaces & Interfaces. 10:19-25. 2016
- An Integrated Approach Utilising Imaging and Computer Aided Design of MR Images for Customized Medical Knee Implants Production. Journal of Medical Imaging and Health Informatics. 5:1839-1842. 2015
- Experimental Investigation and 3D Finite Element Prediction of Temperature Distribution during Travelling Heat Sourced from Oxyacetylene Flame. IOP Conference Series: Materials Science and Engineering. 78:012025. 2015
- Numerical simulation of rock cutting using 2D AUTODYN. IOP Conference Series: Materials Science and Engineering. 100:012052. 2015
- Numerical study of profiled conformal cooling channels for cooling time reduction in injection mould tools. International Journal of Engineering Systems Modelling and Simulation. 7:230. 2015
- Analysis of Two-Layered Film Journal Bearing with Partial Slip Surface. Advanced Materials Research. 903:215-220. 2014
- Analysis of Two-Layered Journal Bearing Lubricated with Ferrofluid. MATEC Web of Conferences. 13:04031. 2014
- Analysis of couple stress fluid lubricated partially textured slip slider and journal bearing using narrow groove theory. Tribology International. 69:1-9. 2014
- Assessment of Powder Mixed EDM: A Review. MATEC Web of Conferences. 13:04018. 2014
- Comparative Study between Programming Systems for Incremental Sheet Forming Process. MATEC Web of Conferences. 13:04009. 2014
- Establishing Correlation between Leaf Spring Specifications and Camber Drop. Applied Mechanics and Materials. 660:794-798. 2014
- Finite Element Modelling of a Pattern of Temperature Distribution during Travelling Heat Source from Oxyacetylene Flame. MATEC Web of Conferences. 13:04003. 2014
- Hot Corrosion Studies in Coal Fired Boiler Environment. MATEC Web of Conferences. 13:03005. 2014
- Improving Rate of Penetration for PDC Drill Bit Using Reverse Engineering. Applied Mechanics and Materials. 607:153-160. 2014
- Influence of Workpiece Shape on MRR and EWR in EDM of Steel. Advanced Materials Research. 903:51-55. 2014
- Mathematical Modeling for the Prediction of Depth of Penetration in Double Pulse GMA Welding Using Fractional Factorial Method. Applied Mechanics and Materials. 660:347-351. 2014
- Nonlinear Analysis of Spur Gear Pair with Time-varying Mesh Stiffness. MATEC Web of Conferences. 13:04032. 2014
- Overcoming Limitation in DFM Using Layer Manufacturing. Applied Mechanics and Materials. 660:94-98. 2014
- Pressure Distribution in Hydrodynamic Journal Bearing with Lubricants Additives. MATEC Web of Conferences. 13:05006. 2014
- Analysis of Journal Bearing Considering the Effects of Surface Layer and Couple Stress Fluids. Asian Journal of Scientific Research. 6:315-322. 2013
- Analysis of Journal Bearing with Double-Layer Porous Lubricant Film: Influence of Surface Porous Layer Configuration. Tribology Transactions. 56:841-847. 2013
- Analysis on Cu-WC-Si as electrode for advancement in electro-discharge machining. International Journal of Materials and Product Technology. 47:241. 2013
- Comparative Study on Data Acquisition Techniques and Solid Reconstruction Algorithm for Quantitative Ulcer Wound Assessment. Asian Journal of Scientific Research. 6:423-433. 2013
- Load Capacity of Partially Textured Journal Bearing with Trapezoidal Recess. Applied Mechanics and Materials. 315:830-834. 2013
- Load Capacity of Partially Textured Slip Parallel Slider and Concentric Journal Bearing Using Narrow Groove Theory. Procedia Engineering. 68:63-69. 2013
- Parametric Control of Oxyacetylene Flame Profile. Advanced Materials Research. 845:790-794. 2013
- Prototype production and experimental analysis for circular and profiled conformal cooling channels in aluminium filled epoxy injection mould tools. Rapid Prototyping Journal. 19:220-229. 2013
- Study of Physical and Mechanical Properties of Aluminum 6092/SiC25p/t6 friction Stir Welded Plate. Asian Journal of Scientific Research. 6:555-563. 2013
- Turn-mill Process Plan and Intelligence Machining Operations Selection on STEP. Asian Journal of Scientific Research. 6:346-352. 2013
- Analysis of Two-layered Porous Journal Bearing using the Brinkman Model. Journal of Applied Sciences. 12:2610-2615. 2012
- Analysis of slider and journal bearing using partially textured slip surface. Tribology International. 56:121-128. 2012
- Centrifugal compressor cooler fan high vibration: A case study. Australian Journal of Mechanical Engineering. 9:1-9. 2012
- Partially Textured Slider and Journal Bearing Analysis. Jurnal Teknologi. 58. 2012
- Surface Quality of Electro-discharge Machined Aluminum Metal Matrix Composite. Journal of Applied Sciences. 12:2442-2447. 2012
- Comparative Thermal Analysis of Circular and Profiled Cooling Channels for Injection Mold Tools. Journal of Applied Sciences. 11:2068-2071. 2011
- Design of STEP-compliant System for Turn-mill Operations using XML. Journal of Applied Sciences. 11:1171-1177. 2011
- Effects of Electro-discharge Machining on Aluminium Metal Matrix Composite. Journal of Applied Sciences. 11:1668-1672. 2011
- Machining of Cemented Tungsten Carbide using EDM. Journal of Applied Sciences. 11:1784-1790. 2011
- Review of Current Development of Pneumatic Artificial Muscle. Journal of Applied Sciences. 11:1749-1755. 2011
- Wear Properties of Alumina Particles Reinforced Aluminium Alloy Matrix Composite. Journal of Applied Sciences. 11:1673-1677. 2011
- Modeling and Control of Distillation Column in a Petroleum Process. Mathematical Problems in Engineering. 2009:1-14. 2009
- Effect of Mold Temperature on High-resilience Cold-cure Flexible Polyurethane Foam Surface Texture. Journal of Cellular Plastics. 41:133-151. 2005
- Analysing the effect of Mold Temperature on Foam Density and Foam Surface Texture. Cellular Polymers. 23:387-402. 2004
book
- Tribology in Sustainable Manufacturing 2023
- Surface Imaging for Biomedical Applications 2014
chapter
- A Comparative Review of Surface Modification Technique Between Physical Vapor Deposition (PVD) and Plasma Electrolytic Oxidation (PEO) for Biomedical Applications. Lecture Notes in Mechanical Engineering. 813-829. 2023
- Corrosion Resistance Enhancement of Stainless Steel Powder Metallurgy in Artificial Body Fluids by Reinforcement of Boron and Niobium. Lecture Notes in Mechanical Engineering. 839-850. 2023
- Recent Advances of Tribology in Sustainable Manufacturing. Tribology in Sustainable Manufacturing. 1-28. 2023
- Review of Current Development of Knee Rehabilitation Device Using Series Elastic Actuator (SEA). Lecture Notes in Mechanical Engineering. 965-980. 2023
- Determining the Alternative Type of Wood for Class a Fire Crib Test According to UL 2166 Standards. Advanced Structured Materials. 19-27. 2022
- Fabrication of Parallel Mechanism Actuated by Pneumatic Artificial Muscle for Rehabilitation Therapy. International Conference on Artificial Intelligence for Smart Community. 355-363. 2022
- Potential Experimental Analysis of Electrical Discharge Machine Process Parameters on Stainless Steel ANSI 304. Progress in Engineering Technology IV. 15-22. 2022
- The Influence of Engineered Tool Surfaces in Ironing. Lecture Notes in Mechanical Engineering. 61-64. 2022
- Additive Manufacturing Processes, Challenges and Applications: A Review. Advanced Structured Materials. 93-111. 2021
- Biolubricants with Additives in Malaysia for Tribological Applications. Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications. 1541-1554. 2021
- Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering. 217-225. 2021
- Design and Fabrication of a Parallel Mechanism for Foot/Ankle Rehabilitation Therapy. Lecture Notes in Mechanical Engineering. 133-141. 2020
- High speed machining of magnesium and its alloys. High Speed Machining. 263-282. 2020
- Influence of Porous Designs on Mechanical Properties of Ti6Al4V for Biomedical Applications. Advanced Structured Materials. 255-271. 2020
- Kinematic and Dynamic Analysis of a Stephenson III Six-Bar Linkage for Amplified Rectilinear Motion: Application to Globe Valve Control Mechanism. Advanced Structured Materials. 243-254. 2020
- Parametric Optimization of Electrical Discharge Machining of SiSiC Ceramic Through the Taguchi Design Approach. Advanced Structured Materials. 223-234. 2020
- Preliminary Study of Stress Distribution on Modified Femoral Component of Knee Implant at Maximum Flexion Angle. Advances in Material Sciences and Engineering. 17-22. 2020
- The Impact of Sintering Dwell Time on Nitrogen Absorption, Densification and Microhardness of 316L Stainless Steel Using Powder Metallurgy. Advanced Structured Materials. 235-242. 2020
- Vibration Analysis Methods for Misalignment and Tolerance Problems in Machine Systems: A Review. Advances in Material Sciences and Engineering. 57-66. 2020
- Investigation of Alloy Composition and Sintering Parameters on the Corrosion Resistance and Microhardness of 316L Stainless Steel Alloy. Lecture Notes in Mechanical Engineering. 532-541. 2019
- Squeeze Film Bearing Characteristics for Synovial Joint Applications. Biomaterials in Orthopaedics and Bone Regeneration. 55-72. 2019
- Synthesis and Characterization of Bioceramic Oxide Coating on Zr-Ti-Cu-Ni-Be BMG by Electro Discharge Process. Lecture Notes in Mechanical Engineering. 518-531. 2019
- The Potential of Improving the Mg-Alloy Surface Quality Using Powder Mixed EDM. Progress in Engineering Technology. 43-53. 2019
- Multi-objective Optimization of MWCNT Mixed Electric Discharge Machining of Al–30SiCp MMC Using Particle Swarm Optimization. Futuristic Composites. 145-164. 2018
- Novel Nano Copper-Tungsten-Based EDM Electrode. Engineering Applications of Nanotechnology. 193-224. 2017
- Thin Film Hydrodynamic Bearing Analysis Using Nanoparticle Additive Lubricants. Engineering Applications of Nanotechnology. 149-173. 2017
conference paper
- Investigation of force analysis Stewart platform actuated by Shape Memory Alloy (SMA). INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2023
- Effect of back rake angle and shape on wear rate of PDC cutter in hard formation. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2018
- Enhancing surface quality of Zr-Cu-Ni-Ti-Be through hydroxyapatite mixed EDM for potential orthopedic application. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2018
- Optimum welding parameter for GMA welding using soft computing techniques. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2017
- Analysis of CNT additives in porous layered thin film lubrication with electric double layer. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2015
- Thermal Conductivity Augmentation of Epoxy Injection Moulds for Cooling Time Reduction 2014
- Analysis of couple stress fluid lubricated journal bearing with partial slip surface 2013
- Analysis of partially textured slider and journal bearing. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2012
- Silk Pneumatic Artificial Muscle (SPAM) construction for bio-medical engineering application 2012
- Volume assessment of various wound attributes models using 3D skin surface imaging 2012
- Analytical studies on volume determination of leg ulcer using laser triangulation and structured light data acquisition techniques 2011
- Fabrication of circular and Profiled Conformal Cooling Channels in aluminum filled epoxy injection mould tools 2011
- Optimum configuration of fin trees in cooling channels of injection moulding process 2011
- STEP based product data model for turn-mill operations 2011
- Synthesizing and characterization of Cu-WC-Si composite prepared by using planetary ball milling 2011

education and training

B.S. in Manufacturing, Northern Illnois University, United States Of America
M.S. in Industrial Engineering, Northern Illnois University, United States Of America
Ph.D. in Mechanical And Manufacturing Engineering, Loughborough University, United Kingdom

full name

Ahmad Majdi Bin Abdul Rani

primary email

majdi@utp.edu.my

webpage

Publications in VIVO

Co-author Network

Contact Info

majdi@utp.edu.my

Websites