Baharom, Masri Bin

Baharom, Masri Bin

Assoc. Prof. Ir. Dr.

Positions

Member, Center of Sustainable Resources for Intelligent and Efficient Mobility , Institute of Smart & Sustainable Living
Associate Professor, Mechanical Engineering Department , Faculty of Engineering
Associate Professor, Electrical & Electronic Engineering Department , Faculty of Engineering
Associate Professor, Universiti Teknologi PETRONAS 2012 -

overview

Masri Baharom specialization automotive Engineering , novel engine designs and development ,novel electrical motor designs and development , transport (vehicle) architecture, vehicle dynamics and control, electric vehicle Design and Simulation and development of Crank-Rocker Engine Fueled by Bio-fuels.

member of

Mechanical Engineering Department

selected publications

academic article
- An investigation of thermal and hydrodynamic behaviour of compound fins under turbulent flow conditions: A numerical and experimental approach. Alexandria Engineering Journal. 89:149-171. 2024
- A study on in-cylinder flow characteristics of crank-rocker engine using CFD and PIV. Materials Today: Proceedings. 2023
- Combustion Characteristics of a Free Piston Engine Linear Generator using Various Fuel Injection Durations. Evergreen. 10:594-600. 2023
- Effect of Mn+2 Doping and Vacancy on the Ferromagnetic Cubic 3C-SiC Structure Using First Principles Calculations. Crystals. 13:348. 2023
- Experimental Investigation of Magnetic Properties of β-SiC Nanoparticle at Room Temperature. Journal of Advanced Research in Applied Sciences and Engineering Technology. 35:173-180. 2023
- The Effect of Curve Cylinder Liner on in-Cylinder Tumble Flow Motion Characteristic using CFD Port Flow Simulation. CFD Letters. 15:186-205. 2023
- Effect of generator configuration on the free-piston motion and power generation of air-driven expander system. Alexandria Engineering Journal. 61:3093-3104. 2022
- Hybrid methodology using balancing optimization and vibration analysis to suppress vibrations in a double crank-rocker engine. Eksploatacja i Niezawodność – Maintenance and Reliability. 24:53-61. 2022
- In-Cylinder Cold-Flow Analysis - ‘A Comparison of Crank-Slider Engine and Crank-Rocker Engine’. Journal Européen des Systèmes Automatisés. 55:229-236. 2022
- Optimisation of operating parameters on the performance characteristics of a free piston engine linear generator fuelled by CNG–H2 blends using the response surface methodology (RSM). International Journal of Hydrogen Energy. 47:1996-2016. 2022
- Balancing and Simulation of a Double Crank-Rocker Engine Model for Optimum Reduction of Shaking Forces and Shaking Moments. Mathematical Modelling of Engineering Problems. 8:237-245. 2021
- Comparative evaluation of different heat transfer correlations on a single curved-cylinder spark ignition crank-rocker engine. Alexandria Engineering Journal. 60:2963-2978. 2021
- Effect of aspect ratio on frequency and power generation of a free-piston linear generator. Applied Thermal Engineering. 192:116944. 2021
- Effect of aspect ratio on the performance characteristics of free piston linear generator engine fueled by hydrogen. International Journal of Hydrogen Energy. 46:10506-10517. 2021
- Experimental study of micro-explosion and puffing of gas-to-liquid (GTL) fuel blends by suspended droplet method. Energy. 218:119462. 2021
- Experimental study on combustion stability and performance of hydrogen-enriched compressed natural gas of a free-piston linear generator. International Journal of Hydrogen Energy. 46:39536-39547. 2021
- IC engine in-cylinder cold-flow analysis – A critical review. Alexandria Engineering Journal. 60:2921-2945. 2021
- Investigation on free-piston motion and power generation of a dual-piston air-driven expander linear generator. Energy Reports. 7:2388-2397. 2021
- Macroscopic and microscopic spray structure of water-in-diesel emulsions. Energy. 223:120040. 2021
- Tri-planar balancing optimization of a double crank-rocker mechanism for shaking forces and shaking moments reduction. Proceedings of the Estonian Academy of Sciences. 70:286. 2021
- Effect of waves and current on motion control of underwater gliders. Journal of Marine Science and Technology. 25:549-562. 2020
- Modelling of Combustion Characteristics of a Single Curved-Cylinder Spark-Ignition Crank-Rocker Engine. Energies. 12:3313. 2019
- Continuous Path Planning of Kinematically Redundant Manipulator using Particle Swarm Optimization. International Journal of Advanced Computer Science and Applications. 9. 2018
- Development of force feedback in steering systems for virtual driving simulator. MATEC Web of Conferences. 159:02050. 2018
- Experimental Investigation of Ignition Timing on the Performance and Emission Characteristics of a Crank-Rocker Engine. International Journal of Vehicle Structures and Systems. 10. 2018
- Investigation of Puffing and Micro-Explosion of Water-in-Diesel Emulsion Spray Using Shadow Imaging. Energies. 11:2281. 2018
- Mathematical Modelling and Transient Thermal Analysis of Coupler-Rocker Bearing. MATEC Web of Conferences. 225:04005. 2018
- On the Application of Proper Orthogonal Decomposition (POD) for In-Cylinder Flow Analysis. Energies. 11:2261. 2018
- Performance Analysis of Enhanced 3D Printed Polymer Molds for Metal Injection Molding Process. Metals. 8:433. 2018
- Pitch and Depth Control of Underwater Glider using LQG and LQR via Kalman Filter. International Journal of Vehicle Structures and Systems. 10. 2018
- Rapid Prototyping of a Customized Cooling System for a Novel Crank Rocker Engine. International Journal of Engineering & Technology. 7:90. 2018
- Performance and combustion characteristics of a novel crank-rocker engine. Journal of Mechanical Science and Technology. 31:3563-3571. 2017
- Analysis of optimum wire rope configuration for equal unidirectional torsional stiffness for flexible steering shaft. MATEC Web of Conferences. 74:00017. 2016
- Determining the effects of thermal conductivity on epoxy molds using profiled cooling channels with metal inserts. Journal of Mechanical Science and Technology. 30:4901-4907. 2016
- RIDE COMFORT SIMULATION OF A VEHICLE EQUIPPED WITH SEMI-ACTIVE STEERING SYSTEM. INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING. 11:2495-2503. 2015
- Comparative Analysis of Two Proposed Models of Connecting rods for Crank-rocker Engines Using Finite Element Method. MATEC Web of Conferences. 13:02019. 2014
- Cycle-by-cycle Variations in a Direct Injection Hydrogen Enriched Compressed Natural Gas Engine Employing EGR at Relative Air-Fuel Ratios.. MATEC Web of Conferences. 13:02009. 2014
- Estimation of Counterweight for Shaking Force Balancing of a Crank-Rocker Mechanism. Applied Mechanics and Materials. 663:135-140. 2014
- Experimental Analysis of Petroleum Wax Characteristics for Lubricant Oil Production in Solvent Dewaxing Unit. Advanced Materials Research. 875-877:529-533. 2014
- Experimental Prediction of Wear Rate on Rail and Wheel Materials at Dry Sliding Contact. MATEC Web of Conferences. 13:03013. 2014
- Output Speed Prediction of an Overrunning Clutch for Oscillatory Input Motion using a Simplified Approach. MATEC Web of Conferences. 13:04006. 2014
- Spray-Wall Impingement of Diesel-CNG Dual Fuel Jet using Schlieren Imaging Technique. MATEC Web of Conferences. 13:02037. 2014
- Zero Distribution of System with Unknown Random Variables Case Study: Avoiding Collision Path. MATEC Web of Conferences. 13:01005. 2014
- Characteristics of compressed natural gas jet and jet-wall impingement using the Schlieren imaging technique. IOP Conference Series: Earth and Environmental Science. 16:012071. 2013
- Design of full electric power steering with enhanced performance over that of hydraulic power-assisted steering. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 227:390-399. 2013
- Estimation Model for the Wax Crystal Size Distribution in Solvent Dewaxing Process. Journal of Applied Sciences. 12:2548-2554. 2012
- Prediction of Contact Temperature on Interaction between Rail and Wheel Materials Using Pin-on-Disc Method. Journal of Applied Sciences. 12:2424-2429. 2012
- Analysis of engine characteristics and emissions fueled by in-situ mixing of small amount of hydrogen in CNG. International Journal of Hydrogen Energy. 36:4029-4037. 2011
- Spray Characteristic Comparisons of Compressed Natural Gas and Hydrogen Fuel using Digital Imaging. Journal of Applied Sciences. 11:1624-1629. 2011
- The effects of fuel-injection timing at medium injection pressure on the engine characteristics and emissions of a CNG-DI engine fueled by a small amount of hydrogen in CNG. International Journal of Hydrogen Energy. 36:11997-12006. 2011
- Analysis of the properties of a steering shaft used as a back-up for a steer-by-wire system during system failure. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 223:177-189. 2009
- Design concepts and analysis of a semi-active steering system for a passenger car. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics. 223:283-292. 2009
chapter
- Development and Validation of a Free Piston Engine Linear Generator Simulation Model Including Cycle-To-Cycle Variation and Ignition Timing Sub-Models. Lecture Notes in Mechanical Engineering. 239-254. 2024
- Thermal Analysis of Helical Pin Fins at Different Pitch Steps Through Numerical Technique. Lecture Notes in Mechanical Engineering. 71-83. 2024
- A Study on the Effect of Structural Properties and Configuration of Low-Stiffness-Resilient-Shaft (LSRS) on Torsional Behavior. Lecture Notes in Mechanical Engineering. 995-1011. 2023
- Characteristics of Dynamics Electromagnetic Force Acting on a Moving Metal Rod at Very Close Distance. Lecture Notes in Mechanical Engineering. 625-634. 2023
- Effect of Valve Opening Frequency on the Performance of Free Piston Linear Generator. Lecture Notes in Mechanical Engineering. 1013-1020. 2023
- A Comparative Study and Validation of Kinematic Analysis of a Crank Rocker Engine Prototype Using MATLAB and ADAMS. International Conference on Artificial Intelligence for Smart Community. 125-133. 2022
- Biolubricants with Additives in Malaysia for Tribological Applications. Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications. 1541-1554. 2021
- Principal, Design and Characteristics of a Free Piston Linear Generator. Energy Efficiency in Mobility Systems. 127-144. 2020
- Turnaround Activities of Rotating Machinery for Mechanical Engineers. Rotating Machineries. 23-42. 2019
conference paper
- Bouncing phenomena of free piston linear generator at starting process. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2018
- Performance investigation on an integrated multi-stage cylindrical-tank solar water heater. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2018
- The effect of engine throttle position on the performance characteristics of a crank-rocker engine fitted with a conventional cylinder head. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2018
- Phase space of self-motion and mechanism path tracking 2015
- Underwater gliders control strategies: A review 2015
- Modeling of wax crystallization in production of lube oil base stock in solvent dewaxing 2011
- Numerical model to simulate wax crystallization in: Scraped surface heat exchangers 2011

education and training

Ph.D. in Vehicle Dynamics, University of Bradford 2008
M.Eng. in Automotive Engineering, Universiti Of Leeds 2000
B.S. in Mechanical Engineering, University of Rochester, USA 1992

full name

Masri Bin Baharom

primary email

masrib@utp.edu.my

webpage

Publications in VIVO

Co-author Network

Contact Info

masrib@utp.edu.my

Websites