Megat Yusoff, Puteri Sri Melor Binti

Megat Yusoff, Puteri Sri Melor Binti

Assoc. Prof. Dr.

Positions

Member, Center of Corrosion Research , Institute of Sustainable Energy & Resources
Associate Professor, Mechanical Engineering Department , Faculty of Engineering
Associate Professor, Universiti Teknologi PETRONAS 1998 -

overview

Assoc. Prof. Dr Puteri Sri Melor binti Megat Yusoff is experienced academician with a demonstrated history of working in the higher education industry. Skilled in polymer and polymer composites; intumescent coatings. Strong education professional with PhD in by University of Manchester Institute of Science and Technology (UMIST), UK .

member of

Mechanical Engineering Department

selected publications

academic article
- Bearing performance and damage characteristics of rein‐infused thermoplastic 3D woven composites bolted joints. Polymer Composites. 45:631-652. 2024
- Degradation and mechanical performance of fibre-reinforced polymer composites under marine environments: A review of recent advancements. Polymer Degradation and Stability. 215:110452. 2023
- Multiscale damage modelling of notched and un-notched 3D woven composites with randomly distributed manufacturing defects. Composite Structures. 318:117109. 2023
- Sintering β-SiC nanopowder using novel microwave-current assisted sintering technique: preliminary study. Advances in Natural Sciences: Nanoscience and Nanotechnology. 14:035013. 2023
- Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites. Applied Composite Materials. 29:515-545. 2022
- Off-Axis and On-Axis Performance of Novel Acrylic Thermoplastic (Elium®) 3D Fibre-Reinforced Composites under Flexure Load. Polymers. 14:2225. 2022
- Off-axis tensile performance of notched resin-infused thermoplastic 3D fibre-reinforced composites. Mechanics of Materials. 175:104478. 2022
- Arrhenius model for styrene monomer migration from single-use polystyrene cup. Materials Today: Proceedings. 47:1350-1354. 2021
- Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering. 207:108592. 2021
- Experimental Investigations on Microwave-Current Assisted Sintering Process and Oxidation of Graphite Die at High Temperature. INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING. 18. 2021
- Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites. Composites Communications. 28:100916. 2021
- Modification of bauxite residue with oxalic acid for improved performance in intumescent coatings. Journal of Materials Research and Technology. 12:679-687. 2021
- Multiscale damage modelling of 3D woven composites under static and impact loads. Composites Part A: Applied Science and Manufacturing. 151:106659. 2021
- Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading. International Journal of Mechanical Sciences. 189:105984. 2021
- Elastic Constants Prediction of 3D Fiber-Reinforced Composites Using Multiscale Homogenization. Processes. 8:722. 2020
- Fabrication of pandanus tectorius (screw-pine) natural fiber using vacuum resin infusion for polymer composite application. Journal of Materials Research and Technology. 8:3102-3113. 2019
- Impact resistance and damage tolerance of fiber reinforced composites: A review. Composite Structures. 217:100-121. 2019
- Quantifying the effects of basalt fibers on thermal degradation and fire performance of epoxy-based intumescent coating for fire protection of steel substrate. Progress in Organic Coatings. 132:148-158. 2019
- Red-mud geopolymer composite encapsulated phase change material for thermal comfort in built-sector. Solar Energy. 181:464-474. 2019
- Synthesis and evaluation of poly octanediol citrate / nano silica composite. Materials Today: Proceedings. 16:1969-1975. 2019
- The study of adhesion between steel substrate, primer, and char of intumescent fire retardant coating. Progress in Organic Coatings. 127:181-193. 2019
- Effect of Grain Boundary Formation in Microstructural Changes in IN 738 Service Exposed Turbine Blade. MATEC Web of Conferences. 225:05022. 2018
- Effects of Halloysite Nanotube Reinforcement in Expandable Graphite Based Intumescent Fire Retardant Coatings Developed Using Hybrid Epoxy Binder System. Chinese Journal of Polymer Science. 36:1286-1296. 2018
- Performance Analysis of Enhanced 3D Printed Polymer Molds for Metal Injection Molding Process. Metals. 8:433. 2018
- Thermal degradation and pyrolysis analysis of zinc borate reinforced intumescent fire retardant coatings. Progress in Organic Coatings. 123:82-98. 2018
- Effects of talc on fire retarding, thermal degradation and water resistance of intumescent coating. Applied Clay Science. 146:350-361. 2017
- Investigation on microstructure and mechanical properties on varying surface region of a service-exposed IN738 turbine blade. International Journal of Microstructure and Materials Properties. 12:38. 2017
- Synergistic Effects of Titanium Dioxide and Zinc Borate on Thermal Degradation and Water Resistance of Epoxy Based Intumescent Fire Retardant Coatings. Key Engineering Materials. 740:41-47. 2017
- Tensile Behaviour and Morphology of Polypropylene/Polycar-bonate/Polypropylene-graft-maleic Anhydride Blends. MATEC Web of Conferences. 109:01005. 2017
- Investigation on changes in gamma prime precipitate on varying surface locations of IN738 engine turbine blade. JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES. 10:2076-2083. 2016
- Influence of Recycling Frequency on Mechanical and Physical Properties of Kenaf Fiber Reinforced Polyoxymethylene Composite. Journal of Natural Fibers. 13:532-546. 2016
- Investigating the Synergistic Effect of Bauxsol™ in an Epoxy Intumescent Coating System. Procedia Engineering. 148:223-227. 2016
- THERMAL properties and morphology of Polypropylene/Polycarbonate/Polypropylene-Graft-Maleic anhydride blends. MATEC Web of Conferences. 69:03001. 2016
- TENSILE STRENGTH OF SINGLE CONTINUOUS FIBER EXTRACTED FROM MENGKUANG LEAVES. Jurnal Teknologi. 76. 2015
- A Numerical Analysis for Predicting the Thermal Conductivity of Carbon Nanotube Reinforced Copper-Matrix Nanocomposites. MATEC Web of Conferences. 13:04011. 2014
- Effect of Kaolin Clay and Alumina on Thermal Performance and Char Morphology of Intumescent fire retardant coating. MATEC Web of Conferences. 13:04013. 2014
- Extraction of Continuous Fiber from Mengkuang Leaves: The Influence of Process Parameters during Alkaline Treatment. MATEC Web of Conferences. 13:04005. 2014
- Homogeneous Distribution of Carbon Nanotubes in Copper Matrix Nanocomposites Fabricated via Combined Technique. Nanoscience and Nanotechnology Letters. 6:865-874. 2014
- Meshless local B-spline-FD method and its application for 2D heat conduction problems with spatially varying thermal conductivity. Applied Mathematics and Computation. 242:236-254. 2014
- The Effect of Particle Size of Wollastonite Filler on Thermal Performance of Intumescent Fire Retardant Coating. MATEC Web of Conferences. 13:03012. 2014
- The Effect of Wollastonite Filler on Thermal Performance of Intumescent Fire Retardant Coating. Advanced Materials Research. 970:328-331. 2014
- The effect of hybridization on mechanical properties of woven kenaf fiber reinforced polyoxymethylene composite. Polymer Composites. 35:1900-1910. 2014
- Effect of Environmental Degradation on Mechanical Properties of Kenaf/Polyethylene Terephthalate Fiber Reinforced Polyoxymethylene Hybrid Composite. Advances in Materials Science and Engineering. 2013:1-8. 2013
- Meshless Local B-Spline Basis Functions-FD Method and its Application for Heat Conduction Problem with Spatially Varying Heat Generation. Applied Mechanics and Materials. 465-466:490-495. 2013
- Water Absorption Properties and Morphology of Polypropylene/ Polycarbonate/Polypropylene-graft-Maleic Anhydride Blends. Asian Journal of Scientific Research. 6:167-176. 2013
- Char Strength of Wool Fibre Reinforced Epoxy-Based Intumescent Coatings (FRIC). Advanced Materials Research. 626:504-508. 2012
- Mechanisms of Char Strengthening in the Fibre Reinforced Intumescent Coatings. Journal of Applied Sciences. 12:2459-2463. 2012
- A Study of Bonding Mechanism of Expandable Graphite Based Intumescent Coating on Steel Substrate. Journal of Applied Sciences. 11:1630-1635. 2011
- Effect of Boric Acid with Kaolin Clay on Thermal Degradation of Intumescent Fire Retardant Coating. Journal of Applied Sciences. 11:3645-3649. 2011
- Optimizing Injection Molding Processing Parameters for Enhanced Mechanical Performance of Oil Palm Empty Fruit Bunch High Density Polyethylene Composites. Journal of Applied Sciences. 11:1618-1623. 2011
- Study on the Fibre Reinforced Epoxy-based Intumescent Coating Formulations and their Char Characteristics. Journal of Applied Sciences. 11:1678-1687. 2011
- Effects of Chemical Treatment on Oil Palm Empty Fruit Bunch Reinforced High Density Polyethylene Composites. Journal of Reinforced Plastics and Composites. 29:2105-2118. 2010
conference paper
- Nano-silica effect on the poly (1, 8-octanediol citrate) composite properties for bone plate application. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2018
- Characterization of red mud-epoxy intumescent char using surface imaging and micro analysis. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2015
- Synergistic effects of mica and wollastonite fillers on thermal performance of intumescent fire retardant coating. INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). 2015

education and training

Ph.D., University of Manchester Institute of Science and Technology (UMIST), UK 1996
University of Manchester, UK 1993
Cornell University 1990

full name

Puteri Sri Melor Binti Megat Yusoff

primary email

puteris@utp.edu.my

webpage

Publications in VIVO

Co-author Network

Contact Info

puteris@utp.edu.my

Websites