publication venue for
- Assessment of Different Matrix-fracture Shape Factor in Double Porosity Medium. 13:308-314. 2013
- Historical Data Based Models for Chilled Water Production from Waste Heat of Turbine. 13:301-307. 2013
- Operating Point Estimation for an Absorption Process using Data Clustering Technique. 13:377-384. 2013
- Optimization of Hybrid Solar and Wind Power Generation. 13:869-875. 2013
- Optimization of Insulation Padding for Directional Solidification. 13:321-325. 2013
- Prediction of Heating Values of Oil Palm Fronds from Ultimate Analysis. 13:491-496. 2013
- A Study on Reduction of Cooling Energy in Glazed Buildings. 12:2436-2441. 2012
- Analysis of Two-layered Porous Journal Bearing using the Brinkman Model. 12:2610-2615. 2012
- Bubbles Size Estimation in Liquid Flow Through a Vertical Pipe. 12:2464-2468. 2012
- Burst Pressure Estimation of Corroded Pipeline with Interacting Defects Using Finite Element Analysis. 12:2626-2630. 2012
- Carbon Nanotubes Reinforced Copper Matrix Nanocomposites via Metal Injection Molding Technique. 12:2397-2403. 2012
- Causal Model for Peak and Off Peak Waste Heat Recovery for Chilled Water Production. 12:2636-2640. 2012
- Characteristics of Induction Flow in SI Direct Injection Engine with Dual Variable Swirl Control Valve. 12:2534-2540. 2012
- Combustion Characteristics of Late Injected CNG in a Spark Ignition Engine under Lean Operating Condition. 12:2368-2375. 2012
- Combustion of Municipal Solid Waste in Fixed Bed Combustor for Energy Recovery. 12:1176-1180. 2012
- Comparative Study Between Degradation Analysis and API 510 Remaining Life Evaluation Method for Feed Gas Filter Vessel Reliability Analysis. 12:2448-2453. 2012
- Corrosion Investigation of Pipeline Steel in Hydrogen Sulfide Containing Solutions. 12:2454-2458. 2012
- Downdraft Gasification of Oil Palm Frond: Effects of Temperature and Operation Time. 12:2574-2579. 2012
- Effect of Oxides Nanoparticle Materials on the Pressure Loss and Heat Transfer of Nanofluids in Circular Pipes. 12:1396-1401. 2012
- Estimation Model for the Wax Crystal Size Distribution in Solvent Dewaxing Process. 12:2548-2554. 2012
- Exergy Analysis of a Double-effect Parallel-flow Commercial Steam Absorption Chiller. 12:2580-2585. 2012
- Fracture Toughness and Fatigue Crack Growth Study of Friction Stir Welded Plates. 12:2469-2473. 2012
- Investigation of Starting Behaviour of a Free-piston Linear Generator. 12:2592-2597. 2012
- Mechanisms of Char Strengthening in the Fibre Reinforced Intumescent Coatings. 12:2459-2463. 2012
- Prediction of Contact Temperature on Interaction between Rail and Wheel Materials Using Pin-on-Disc Method. 12:2424-2429. 2012
- Preparation and Characterization of Activated Carbon from Rubber-seed Shell by Chemical Activation. 12:1124-1129. 2012
- Reliability Assessment of Repairable System based on Performance Data. 12:2568-2573. 2012
- Surface Quality of Electro-discharge Machined Aluminum Metal Matrix Composite. 12:2442-2447. 2012
- Syngas Production from Gasification of Oil Palm Fronds with an Updraft Gasifier. 12:2555-2561. 2012
- Systematic Approach to Maintainability Analysis at Operational Phase. 12:2562-2567. 2012
- The Effect of Carbon Dioxide Content-natural Gas on the Performance Characteristics of Engines: A Review. 12:2346-2350. 2012
- To Study the Effect of Aluminium Trihydrate and Fumed Silica on Intumescent Fire Retardant Coating. 12:2631-2635. 2012
- Variation of Bed Pressure Drop with Particle Shapes in a Swirling Fluidized Bed. 12:2598-2603. 2012
- 1D EM Modeling for Onshore Hydrocarbon Detection using MATLAB. 11:1136-1142. 2011
- A Framework to Recover Single Link Failure on Shortest Path in Shortest Path Tree. 11:2916-2923. 2011
- A Study of Bonding Mechanism of Expandable Graphite Based Intumescent Coating on Steel Substrate. 11:1630-1635. 2011
- An Experimental Study of Different Effects of EGR Rates on The Performance And Exhaust Emissions of The Stratified Charge Piston Direct Injection Compressed Natural Gas Engine. 11:1479-1490. 2011
- Analysis of Annual Cooling Energy Requirements for Glazed Academic Buildings. 11:2024-2029. 2011
- Analytical Analysis of Roof Top Solar Chimney for Power Generation. 11:1741-1748. 2011
- Automated Calculations for Improvement of Tank Inventory at Fuel Terminals. 11:1770-1776. 2011
- Binder Removal from Powder Injection Molded 316L Stainless Steel. 11:2042-2047. 2011
- Burst Strength Analysis of Corroded Pipelines by Finite Element Method. 11:1845-1850. 2011
- Characterization of Aligned MWCNTs Array as the Sensing Element for Ionization Gas Sensor. 11:1243-1248. 2011
- Characterization of the Structure Feature of Bimetallic Fe-Ni Catalysts. 11:1297-1302. 2011
- Comparative Thermal Analysis of Circular and Profiled Cooling Channels for Injection Mold Tools. 11:2068-2071. 2011
- Comparison of HCCI and SI Characteristics on Low Load CNG-DI Combustion. 11:1827-1832. 2011
- Density and Viscosity Estimation of 1-hexyl-3-methyl Imidazolium Based Ionic Liquids with [BF4] and [PF6] Anions at High Pressures. 11:2452-2455. 2011
- Design of Hybrid Power System of Renewable Energy for Domestic Used in Khartoum. 11:2270-2275. 2011
- Design of STEP-compliant System for Turn-mill Operations using XML. 11:1171-1177. 2011
- Development and Strengthening of 2219 Aluminium Alloy by Mechanical Working and Heat Treatment. 11:1857-1861. 2011
- Development of EM Wave Guide Amplifier Potentially used for Sea Bed Logging. 11:1361-1365. 2011
- Effect of Boric Acid with Kaolin Clay on Thermal Degradation of Intumescent Fire Retardant Coating. 11:3645-3649. 2011
- Effect of Calcination Method on the Catalytic Degradation of Polystyrene using Al2O3 Supported Sn and Cd Catalysts. 11:1346-1350. 2011
- Effect of Exhaust Gas Recirculation on the Dual Fuel Combustion of Gasoline and CNG by Compression Ignition. 11:2030-2035. 2011
- Effect of Surfactant Concentration on the Physico-chemical Characteristics of Mesoporous Molecular Sieve. 11:1178-1184. 2011
- Effects of Electro-discharge Machining on Aluminium Metal Matrix Composite. 11:1668-1672. 2011
- Exergy Based Performance Analysis of a Gas Turbine at Part Load Conditions. 11:1994-1999. 2011
- Flame Development Study at Variable Swirl Level Flows in a Stratified CNG DI Combustion Engine using Image Processing Technique. 11:1698-1706. 2011
- Gas Flame Temperature Measurement Using Background Oriented Schlieren. 11:1658-1662. 2011
- Generating Gas Turbine Component Maps Relying on Partially Known Overall System Characteristics. 11:1885-1894. 2011
- Instability of SBA-15 to Strong Base: Effects of LiOH Impregnation on its Surface Characteristics and Mesoporous Structure. 11:3510-3514. 2011
- Machining of Cemented Tungsten Carbide using EDM. 11:1784-1790. 2011
- Magnitude Verses Offset Study with EM Transmitter in Different Resistive Medium. 11:1309-1314. 2011
- Model Development for Hydrodynamic Study of Fluidized Bed Gasifier for Biomass Gasification. 11:2334-2339. 2011
- Modeling of Maintenance Downtime Distribution using Expert Opinion. 11:1573-1579. 2011
- Oil Recovery by Using Electromagnetic Waves. 11:1366-1370. 2011
- On Integer Sequences Related to a Memorization Technique. 11:1473-1475. 2011
- Optimizing Injection Molding Processing Parameters for Enhanced Mechanical Performance of Oil Palm Empty Fruit Bunch High Density Polyethylene Composites. 11:1618-1623. 2011
- Optimum Tilt Angle and Orientation of Stand-Alone Photovoltaic Electricity Generation Systems for Rural Electrification. 11:1219-1224. 2011
- Predicting Flow Rate of V-shape Custom Tank using Derivative Free Recursive Algorithm. 11:1279-1284. 2011
- Predicting the Young’s Modulus of Single-Walled Carbon Nanotubes using Finite Element Modeling. 11:1653-1657. 2011
- Probabilistic Reliability Assessment of an Insulated Piping in the Presence of Corrosion Defects. 11:2063-2067. 2011
- Purification of Natural Gas with High CO2 Content by Formation of Gas Hydrates: Thermodynamic Verification. 11:3547-3554. 2011
- RCM Analysis of Process Equipment: A Case Study on Heat Exchangers. 11:2058-2062. 2011
- Reliability and Availability Evaluation for a Multi-state System Subject to Minimal Repair. 11:2036-2041. 2011
- Review of Current Development of Pneumatic Artificial Muscle. 11:1749-1755. 2011
- Selectivity of Rhodium-catalyzed Hydroformylation of 1-Octene in a Thermomorphic Solvent System. 11:1157-1163. 2011
- Spray Characteristic Comparisons of Compressed Natural Gas and Hydrogen Fuel using Digital Imaging. 11:1624-1629. 2011
- Steady State Simulation of a Double-Effect Steam Absorption Chiller. 11:2018-2023. 2011
- Stress Intensity Factor for Cracks Emanating from a Shaft. 11:1839-1844. 2011
- Study Combinations Effects of HAc in H2S/CO2 Corrosion. 11:1821-1826. 2011
- Study on the Fibre Reinforced Epoxy-based Intumescent Coating Formulations and their Char Characteristics. 11:1678-1687. 2011
- Sustainable Solar-wind Hybrid Power Plant for Implementation in Malaysia. 11:1121-1128. 2011
- Synthesis and Characterization of Pure Anatase TiO2 Aggregates. 11:1326-1330. 2011
- Synthesis and Physiochemical Properties of Supramolecular Phosphonium-based Symmetrical Dicationic Ionic Liquids. 11:1356-1360. 2011
- Technology Review of Natural Gas Liquefaction Processes. 11:3541-3546. 2011
- The Combustion Behavior Analysis of Dual Fuel HCCI using the Shell Model. 11:1559-1565. 2011
- The Operation of Free Piston Linear Generator Engine Using MOSFET and IGBT Drivers. 11:1791-1796. 2011
- The Study of Wear Behaviour of 12-hydroxystearic Acid in Vegetable Oils. 11:1381-1385. 2011
- Thermophysical Properties of Trihexyltetradecyl Phosphonium Octylsulfosuccinate Ionic Liquid. 11:1396-1400. 2011
- Transient Cooling Load Characteristic of an Academic Building, using TRNSYS. 11:1777-1783. 2011
- Wear Properties of Alumina Particles Reinforced Aluminium Alloy Matrix Composite. 11:1673-1677. 2011
- Wireless Control Mechanism for EM Source and Receiver Positioning for Offshore Application. 11:1087-1095. 2011
- Characterization of Adsorbent Developed from Rice Husk: Effect of Surface Functional Group on Phenol Adsorption. 10:1060-1067. 2010
- Closed-Loop System Identification using OBF-ARMAX Model. 10:3175-3182. 2010
- Comparison of Predictive Models for Relative Permeability of CO2 in Matrimid-Carbon Molecular Sieve Mixed Matrix Membrane. 10:1204-1211. 2010
- Dissolution of Bamboo (Gigantochloa scortechinii) Using Ionic Liquids. 10:1090-1096. 2010
- Effect of Process Parameters on Hydrogen Production and Efficiency in Biomass Gasification using Modelling Approach. 10:3183-3190. 2010
- Flux and Rejection of Methyldiethanolamine from Wastewater by Composite Reverse Osmosis Membrane. 10:3331-3336. 2010
- Modeling and Simulation of Fixed Bed Adsorption Column using Integrated CFD Approach. 10:3229-3235. 2010
- Optimizing Humidity Level and Illuminance to Enhance Worker Performance in an Automotive Industry. 10:1389-1396. 2010
- Preparation and Characterization of Copper Feedstock for Metal Injection Molding. 10:3295-3300. 2010
- Preparation, Characterization and Catalytic Test of MoVSb and MoVNb Mixed Oxide Catalysts for Propane Ammoxidation to Acrylonitrile. 10:2697-2700. 2010
- Removal of CO2 from Natural Gas Using Membrane Separation System: Modeling and Process Design. 10:1134-1139. 2010
- Steady State Modeling and Simulation of the Riser in an Industrial RFCC Unit. 10:3207-3214. 2010
- System Identification using Orthonormal Basis Filters. 10:2516-2522. 2010
- Technical Evaluation of Current Hydrogen Storage Technologies for Vehicles. 10:1200-1203. 2010
- Thermal Decomposition Kinetics of Forest Residue. 10:1122-1127. 2010
- High Degree of Testability Using Full Scan Chain and ATPG-An Industrial Perspective. 9:2613-2618. 2009
- Determination of Inter-Stage Idle Times in Scheduling Design of a Three Stage Zero Wait Batch Process. 8:1706-1712. 2008
- Scheduling Three Stage Flowshop Processes with No Intermediate Storage Using Novel Matrix Approach. 8:2136-2141. 2008
- Performance Analysis of Optical Zero Cross Correlation in OCDMA System. 7:3819-3822. 2007
- Lignin Graft Copolymer as a Drilling Mud Thinner for High Temperature Well. 6:1808-1813. 2006