publication venue for
- Investigating the influence of plastic waste oils and acetone blends on diesel engine combustion, pollutants, morphological and size particles: Dehalogenation and catalytic pyrolysis of plastic waste. 291:117312. 2023
- Optimizing extraction of antioxidative biostimulant from waste onion peels for microalgae cultivation via response surface model. 286:117023. 2023
- Effects of hybrid nanoparticle additives in n-butanol/waste plastic oil/diesel blends on combustion, particulate and gaseous emissions from diesel engine evaluated with entropy-weighted PROMETHEE II and TOPSIS: Environmental and health risks of plastic waste. 264:115758. 2022
- Fundamental understanding of in-situ transesterification of microalgae biomass to biodiesel: A critical review. 270:116212. 2022
- Power management optimization of hybrid solar photovoltaic-battery integrated with pumped-hydro-storage system for standalone electricity generation. 215:112942. 2020
- Artificial neural network modeling and analysis of photovoltaic/thermal system based on the experimental study. 186:368-379. 2019
- Modeling to enhance attached microalgal biomass growth onto fluidized beds packed in nutrients-rich wastewater whilst simultaneously biofixing CO2 into lipid for biodiesel production. 185:1-10. 2019
- Revealing the effect of reaction parameters towards alkyl group distribution in in-situ transesterification of Chlorella vulgaris. 185:223-231. 2019
- Thermal analysis of a hybrid solar desalination system using various shapes of cavity receiver: Cubical, cylindrical, and hemispherical. 198:111861. 2019
- A review of thermoelectric power generation systems: Roles of existing test rigs/ prototypes and their associated cooling units on output performance. 174:138-156. 2018
- Enhancing the performance of energy recovery ventilators. 171:196-210. 2018
- Experimental and simulation investigation into the effects of a flat plate deflector on vertical axis wind turbine. 160:109-125. 2018
- Harvesting and pre-treatment of microalgae cultivated in wastewater for biodiesel production: A review. 171:1416-1429. 2018
- Semi-continuous cultivation of Chlorella vulgaris using chicken compost as nutrients source: Growth optimization study and fatty acid composition analysis. 164:363-373. 2018
- The effect of diethyl ether addition on performance and emission of a reactivity controlled compression ignition engine fueled with ethanol and diesel. 174:779-792. 2018
- A review on heat sink for thermo-electric power generation: Classifications and parameters affecting performance. 134:260-277. 2017
- An experimental investigation of SiC nanofluid as a base-fluid for a photovoltaic thermal PV/T system. 142:547-558. 2017
- Comparative study to use nano-(Al 2 O 3 , CuO, and SiC) with water to enhance photovoltaic thermal PV/T collectors. 148:963-973. 2017
- Evaluation of the nanofluid and nano-PCM based photovoltaic thermal (PVT) system: An experimental study. 151:693-708. 2017
- Experimental studies of rectangular tube absorber photovoltaic thermal collector with various types of nanofluids under the tropical climate conditions. 124:528-542. 2016
- Experimental analysis of a porous burner operating on kerosene–vegetable cooking oil blends for thermophotovoltaic power generation. 96:544-560. 2015
- Fast pyrolysis of hardwood residues using a fixed bed drop-type pyrolyzer. 98:208-214. 2015
- Efficiencies and improvement potential of building integrated photovoltaic thermal (BIPVT) system. 77:527-534. 2014
- Kinetic studies of co-pyrolysis of rubber seed shell with high density polyethylene. 87:746-753. 2014
- Part-load performance and emissions of a spark ignition engine fueled with RON95 and RON97 gasoline: Technical viewpoint on Malaysia’s fuel price debate. 88:928-935. 2014
- Performance analysis of photovoltaic thermal (PVT) water collectors. 78:641-651. 2014
- Actual performance and characteristic of a grid connected photovoltaic power system in the tropics: A short term evaluation. 71:115-119. 2013
- CFD simulation of air to air enthalpy heat exchanger. 74:377-385. 2013
- Energy analysis and improvement potential of finned double-pass solar collector. 75:234-240. 2013
- Enhance heat transfer for PCM melting in triplex tube with internal–external fins. 74:223-236. 2013
- Implementation and validation of an artificial neural network for predicting the performance of a liquid desiccant dehumidifier. 67:240-250. 2013
- Performance and cost benefits analysis of double-pass solar collector with and without fins. 76:8-19. 2013
- Simulation of energy saving potential of a centralized HVAC system in an academic building using adaptive cooling technique. 75:617-628. 2013
- Brønsted imidazolium ionic liquids: Synthesis and comparison of their catalytic activities as pre-catalyst for biodiesel production through two stage process. 52:804-809. 2011
- Predicting the performance of amorphous and crystalline silicon based photovoltaic solar thermal collectors. 52:1741-1747. 2011
- Surfactants as additives for NOx reduction during SNCR process with urea solution as reducing agent. 52:3083-3088. 2011
- Daylighting as a passive solar design strategy in tropical buildings: a case study of Malaysia. 43:1725-1736. 2002
- Performance of a double pass photovoltaic thermal solar collector suitable for solar drying systems. 41:353-365. 2000
- Performance analysis of photovoltaic thermal air heaters. 37:1657-1670. 1996