publication venue for
- A new method of reinforcing graphene nanoplatelets in glass/epoxy composites. 54:1157-1166. 2023
- Deposition of biomimetic biocompatible oxides on metallic glass surface by electro‐discharge coating process. 54:129-136. 2023
- Performance optimization of polyetherimide‐zeolite 4A mixed matrix membranes for carbon dioxide/methane separation process using response surface methodology. 54:571-585. 2023
- Theoretical analysis of various permeation models for gas transport through a covalent organic framework (COF) mixed matrix membrane. 54:1400-1406. 2023
- Effect of carbon nanotubes on the flexural properties and flammability of carbon fibre/epoxy multi‐scale composites. 53:1544-1550. 2022
- Effect of processing parameter on void content of glass fibre composite laminate. 53:308-315. 2022
- Screening of forward osmosis membrane potential to treat produced water. 53:686-697. 2022
- An atomistic investigation into water adsorption behavior on the surfaces of quartz (001) and calcite (001). 52:1073-1079. 2021
- Investigating the effect of mixing time on the crystallite size and lattice strain of the AA7075/TiC composites. 52:1112-1120. 2021
- Macroscale assessment of low‐velocity impact on hybrid composite laminates. 52:1101-1111. 2021
- 3D graphene/fly ash waste material for hybrid supercapacitor electrode: specific capacitance analysis. 51:713-718. 2020
- Experimental evaluation of thermophysical properties of oil‐based titania nanofluids for medium temperature solar collectors. 51:792-802. 2020
- Mechanical performance optimization of similar thin AA 7075‐T6 sheets produced by refill friction stir spot welding. 51:830-835. 2020
- Characterization and stability analysis of oil‐based copper oxide nanofluids for medium temperature solar collectors. 50:311-319. 2019
- Design of a pavement using piezoelectric materials. 50:320-328. 2019
- Influence of powder loading on densification and microstructure of injection molded Fe‐50Ni soft magnetic alloys. 50:274-282. 2019
- Optimization of cryogenic carbon dioxide capture from natural gas. 50:248-253. 2019
- Prognosis of gas turbine remaining useful life using particle filter approach. 50:336-345. 2019
- A synergy study of zinc borate in halloysite nanotube reinforced, siloxane epoxy base intumescent fire resistive coatings. 49:420-426. 2018
- Influence of deposition temperature on the corrosion resistance of electrodeposited zinc‐nickel alloy coatings. 49:472-482. 2018
- The influence of CO2 accelerated carbonation on alkali‐activated fly ash cement under elevated temperature and pressure. 49:483-488. 2018
- CFD simulation of bubbling fluidized bed: Effects of bed column geometry on hydrodynamics of gas–solid mixing. 48:226-234. 2017
- Comparison of carbon‐based nanomaterials characteristics on H13 tool steel. 48:198-204. 2017
- In–plane shear properties of basalt–carbon/epoxy hybrid composite laminates. 48:261-266. 2017
- Linear stability analysis of short journal bearing with an axial groove. 48:210-217. 2017
- Mechanical properties of recycled aluminium chip reinforced with alumina (Al2O3) particle. 48:306-310. 2017
- Numerical simulation of two–phase separation in a small diameter ratio T‐junction. 48:255-260. 2017
- The effect of fiber angles on energy absorption of 50 % partially wrapped aluminium‐composite hybrid tube under axial crushing. 48:267-272. 2017
- Weld strength in solid–state recycling of aluminum chips. 48:290-298. 2017