Md Yusof, Muhammad Aslam bin

Md Yusof, Muhammad Aslam bin

Ir. Dr.

Positions

Member, Centre of Reservoir Dynamics , Institute of Sustainable Energy & Resources
Lecturer, Petroleum Engineering Department , Faculty of Engineering

overview

Muhammad Aslam bin Md Yusof is a lecturer at Universiti Teknologi PETRONAS (Malaysia), department Petroleum Engineering. Before joining UTP, he served as research at PETRONAS Carigali Sdn. Bhd. He currently taking his PhD in Petroleum Engineering Universiti Teknologi PETRONAS, Msc in Petroleum Engineering by University of New South Wales, and his Degree in Petroleum Engineering by Universiti Teknologi PETRONAS in 2010. His primary interest areas include Drilling Engineering (Drilling Fluid and Formation Damage Study) and Drilling Fluid and Formation Damage Study.

member of

Petroleum Engineering Department

selected publications

academic article
- Assessment of Advanced Remediation Techniques for Enhanced CO₂ Injectivity: Laboratory Investigations and Implications for Improved CO₂ Flow in Saline Aquifers. Energy & Fuels. 38:8895-8908. 2024
- Carbonated Water Injection for Enhanced Oil Recovery and CO₂ Geosequestration in Different CO₂ Repositories: A Review of Physicochemical Processes and Recent Advances. Energy & Fuels. 38:6579-6612. 2024
- Enhancing geopolymer cement self-healing property with elastomeric materials. Cogent Engineering. 11. 2024
- The influence of nanoparticle size, concentration, and functionalization on drilling fluid filtration properties. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 693:134020. 2024
- Amidated Pectic Polysaccharides (Pectin) as Methane Hydrate Inhibitor at Constant Cooling and Isobaric Condition. Polymers. 15:2080. 2023
- Experimental and theoretical investigation of the mechanisms of drying during CO2 injection into saline reservoirs. Scientific Reports. 13:9155. 2023
- Influence of size and surface charge on the adsorption behaviour of silicon dioxide nanoparticles on sand particles. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 674:131943. 2023
- Physical and chemical effect of impurities in carbon capture, utilisation and storage. Journal of Petroleum Exploration and Production Technology. 13:1235-1246. 2023
- The effect of surface properties of silicon dioxide nanoparticle in drilling fluid on return permeability. Geoenergy Science and Engineering. 227:211867. 2023
- A review on the effect of nanoparticle in drilling fluid on filtration and formation damage. Journal of Petroleum Science and Engineering. 217:110922. 2022
- Experimental study of CO2 injectivity impairment in sandstone due to salt precipitation and fines migration. Journal of Petroleum Exploration and Production Technology. 12:2191-2202. 2022
- FACIES ANALYSIS AND DEPOSITIONAL MODEL OF THE MIDDLE-UPPER TRIASSIC SEMANTAN FORMATION, CENTRAL PAHANG, MALAYSIA. ASEAN Engineering Journal. 12:195-203. 2022
- Influence of Brine–Rock Parameters on Rock Physical Changes During CO2 Sequestration in Saline Aquifer. Arabian Journal for Science and Engineering. 47:11345-11359. 2022
- Combined Impact of Salt Precipitation and Fines Migration on CO2 Injectivity Impairment. International Journal of Greenhouse Gas Control. 110:103422. 2021
- Effects of CO2/Rock/Formation Brine Parameters on CO2 Injectivity for Sequestration. SPE Journal. 26:1455-1468. 2021
- Screening of Geomechanical Risks for Malaysian Development Field. MATEC Web of Conferences. 87:01013. 2017
- Development of mathematical model for hydraulic fracturing design. Journal of Petroleum Exploration and Production Technology. 5:269-276. 2015
conference paper

education and training

Ph.D. in Petroleum Engineering 2017 - 2021
M.E. in Petroleum Engineering, University of New South Wales 2012 - 2013
B.E. in Petroleum Engineering, Universiti Teknologi PETRONAS 2006 - 2010

full name

Muhammad Aslam bin Md Yusof

primary email

aslam.myusof@utp.edu.my

webpage

Publications in VIVO

Co-author Network

Contact Info

aslam.myusof@utp.edu.my

Websites