Othman, Abdul Rahim Bin

Othman, Abdul Rahim Bin

Assoc. Prof. Dr.

Positions

Member, Center of Corrosion Research , Institute of Sustainable Energy & Resources
Associate Professor, Mechanical Engineering Department , Faculty of Engineering
Associate Professor, Universiti Teknologi PETRONAS 2015 -

overview

Abdul Rahim Othman is experienced academician with a demonstrated history of working in the higher education industry. Skilled in solid mechanics, advanced composite materials, processing, machine design and finite element analysis. Strong education professional with PhD by University of Leeds, UK.

member of

Mechanical Engineering Department

selected publications

academic article
- Improved pressure sensitivity prediction of a rubber-based diaphragm FBG pressure sensor using theoretical model and finite element analysis. International Journal of Adhesion and Adhesives. 132:103687. 2024
- Influence of high temperature during tensile test for stainless steel using acoustic emission. Process Safety Progress. 43. 2024
- Low pressure pipeline leak localization using highly sensitive rubber-based diaphragm FBG pressure sensors and NPW method. Optical Fiber Technology. 83:103687. 2024
- Significant Effect of Vacuum Bagging Processing on Inter-Laminar Shear Strength and Voids of Composite in Oven Cure. Journal of Advanced Research in Applied Sciences and Engineering Technology. 37:69-81. 2024
- The Optimization of Vacuum-Bagging Processing in Oven Cure for Tensile Strength in Composite Laminate. Journal of Advanced Research in Applied Sciences and Engineering Technology. 37:37-48. 2024
- A Computational Technique for Low-Cycle Fatigue of LNG Mixing-Tee Weldment – An Industry Case Study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 104:103-114. 2023
- Correlation Analysis of Established Creep Failure Models through Computational Modelling for SS-304 Material. Metals. 13:197. 2023
- New Creep Crack Growth Prediction Model for the Life Assessment of Stainless-Steel Material Using Computational Modeling. Metals. 13:1854. 2023
- Stress Classification Lines for Non-Standard Y-Tee Design in Piping System. Journal of Advanced Research in Applied Sciences and Engineering Technology. 33:367-383. 2023
- Effect of carbon nanotubes on the flexural properties and flammability of carbon fibre/epoxy multi‐scale composites. Materialwissenschaft und Werkstofftechnik. 53:1544-1550. 2022
- Effect of processing parameter on void content of glass fibre composite laminate. Materialwissenschaft und Werkstofftechnik. 53:308-315. 2022
- Limitations on the computational analysis of creep failure models: A review. Engineering Failure Analysis. 134:105968. 2022
- An intelligent model to predict the life condition of crude oil pipelines using artificial neural networks. Neural Computing and Applications. 33:14771-14792. 2021
- Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering. 207:108592. 2021
- Creep Parameters Determination by Omega Model to Norton Bailey Law by Regression Analysis for Austenitic Steel SS-304. Solid State Phenomena. 324:188-197. 2021
- Curve Fitting for Damage Evolution through Regression Analysis for the Kachanov–Rabotnov Model to the Norton–Bailey Creep Law of SS-316 Material. Materials. 14:5518. 2021
- Determination of Non-Recrystallization Temperature for Niobium Microalloyed Steel. Materials. 14:2639. 2021
- Smart Sensing with Edge Computing in Precision Agriculture for Soil Assessment and Heavy Metal Monitoring: A Review. Agriculture. 11:475. 2021
- Thermal Stability of PALF-PP and PALF-PLA for Natural Fiber Honeycomb Core Materials. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 87:20-29. 2021
- A Feed-Forward Back Propagation Neural Network Approach to Predict the Life Condition of Crude Oil Pipeline. Processes. 8:661. 2020
- Development of Heavy Metal Potentiostat for Batik Industry. Applied Sciences. 10:7804. 2020
- Implementation of Parallel K-Means Algorithm to Estimate Adhesion Failure in Warm Mix Asphalt. Advances in Civil Engineering. 2020:1-26. 2020
- Combustion performance of rubber seed methyl ester using aromatic and phenolic antioxidants in a multi-cylinder diesel engine. Clean Technologies and Environmental Policy. 20:2239-2253. 2018
- Wear Detection of Drill Bit by Image-based Technique. IOP Conference Series: Materials Science and Engineering. 328:012011. 2018
- A review on the manufacturing defects of complex-shaped laminate in aircraft composite structures. The International Journal of Advanced Manufacturing Technology. 91:4081-4094. 2017
- Contribution of processing parameters on void content in the vacuum bagging configurations of L-shaped composite laminates. The International Journal of Advanced Manufacturing Technology. 93:1333-1345. 2017
- Experimental Study on Tensile Strength of Butt Joints for Mild Steel with Thickness 6mm Using Gas Metal Arc Welding (GMAW). Key Engineering Materials. 740:155-160. 2017
- Mitigating stress concentration through defense hole system for improvement in bearing strength of composite bolted joint, Part 1: Numerical analysis. Journal of Composite Materials. 51:3685-3699. 2017
- The use of response surface methodology (RSM) to optimize the acid digestion parameters in fiber volume fraction test of aircraft composite structures. The International Journal of Advanced Manufacturing Technology. 90:3739-3748. 2017
- Defect Detection of Fiberglass Composite Laminates (FGCL) with Ultrasonic A-Scan Signal Measurement. IOP Conference Series: Materials Science and Engineering. 114:012106. 2016
- Effect of milling parameters on mechanical alloying of aluminum powders. The International Journal of Advanced Manufacturing Technology. 76:1319-1332. 2015
- FIBER GLASS COMPOSITE LAMINATES (FGCL) MEASUREMENT USING 3 AXIS PULSE ECHO SCANNING UNIT. Jurnal Teknologi. 76. 2015
- Damage Characterization of Polypropylene Honeycomb Sandwich Panels Subjected to Low-Velocity Impact. Advances in Materials Science and Engineering. 2013:1-10. 2013
- Effect of different construction designs of aramid fabric on the ballistic performances. Materials & Design (1980-2015). 44:407-413. 2013
- Influence of Woven and Cross-Ply Laminates on Mechanical Properties of Coir Epoxy Composite. Applied Mechanics and Materials. 315:136-140. 2013
- Investigating the Effects of Injection Moulding Process Parameters on Multiple Tensile Characteristics of Plastic Spur Gear via Experimental Approach. Advanced Materials Research. 748:544-548. 2013
- Void Content Determination of Fiber Reinforced Polymers by Acid Digestion Method. Advanced Materials Research. 795:64-68. 2013
- A Study of Hybrid Optimization of Injection Moulding Process Parameters for Plastic Gear. Advanced Materials Research. 591-593:2135-2138. 2012
- Prediction of Fatigue Life in Cold Forging Punch Design for Fastener Using Integrated FEA and Stress Life Approach. Procedia Engineering. 50:505-515. 2012
- A Review on the Performance of Adhesive Bonding in Polymer Composite Joints. Key Engineering Materials. 471-472:610-615. 2011
- Computer-Aided FE Simulation for Flashless Cold Forging of Connecting Rod Without Underfilling. Arabian Journal for Science and Engineering. 36:855-865. 2011
- Fiber Reinforced Composite Structure with Bolted Joint – A Review. Key Engineering Materials. 471-472:939-944. 2011
- Residual Strength and Failure Criterion of PP Thermoplastic Honeycomb Sandwich Subjected to Low Velocity Impact. Key Engineering Materials. 471-472:646-651. 2011
- Work-piece optimization and thermal analysis for flash-less cold forging of AUV propeller hubs — FEM simulation and experiment. Journal of Manufacturing Processes. 13:41-49. 2011
- Finite element analysis and experimental validation of flashless cold forging of propeller hubs and blade of autonomous underwater vehicle. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 224:1455-1467. 2010
- Failure initiation and propagation characteristics of honeycomb sandwich composites. Composite Structures. 85:126-138. 2008
chapter
- Assessment of Heat Exchanger Tube Bundle Using STELLAR: Industrial Case Study. Lecture Notes in Mechanical Engineering. 221-228. 2024
- A Case Study to Predict Structural Health of a Gasoline Pipeline Using ANN and GPR Approaches. Lecture Notes in Mechanical Engineering. 611-624. 2023
- Experimental Evaluation of Drag Reduction in Pipe Flow Using Streamlined Turbulence Modifiers. Lecture Notes in Mechanical Engineering. 237-248. 2023
- Leakage Quantification of Bolted Flange Joint Subjected to Different Bolt Sizes and External Load. Lecture Notes in Mechanical Engineering. 741-752. 2023
- Effect of Bevel Angle and Welding Current on T-Joint Using Gas Metal Arc Welding (GMAW). The Advances in Joining Technology. 49-57. 2019
- Development of Pole-Like Tree Spiral Climbing Robot. Lecture Notes in Mechanical Engineering. 285-293. 2018
- Statistical Analysis of the Machining Parameters in Drilling of Carbon Fibre Reinforced Plastics (CFRP) Composite with Various Drill Types. Lecture Notes in Mechanical Engineering. 141-154. 2018
- Systematic Approach for Uncertainty Delta E Data for Composites Panel Coating Analysis. Lecture Notes in Mechanical Engineering. 131-140. 2018
conference paper

education and training

Ph.D., University of Leeds, UK 2007
M.Sc. in Automotive Engineering, University of Leeds, UK 2002
B.E., Universiti Sains Malaysia 2001

full name

Abdul Rahim Bin Othman

primary email

rahim.othman@utp.edu.my

webpage

Publications in VIVO

Co-author Network

Contact Info

rahim.othman@utp.edu.my

Websites