Journal
Information Content Entity
Continuant
Entity
Periodical
Generically Dependent Continuant
Collection
RDF description of IOP Conference Series: Materials Science and Engineering - http://gateway.utp.edu.my/vivo/individual/n822
Comparative Study of Total Phenolic Content and Total Flavonoid Content Extraction from Guava Juices by Progressive Freeze Concentration and Evaporation
Preliminary study of plant extract on seed germination
Additive Manufacturing Technology for Biomedical Components: A review
Nanocarbon-based enhanced squeeze treatment for improved scale management
Experimental Investigation and 3D Finite Element Prediction of Temperature Distribution during Travelling Heat Sourced from Oxyacetylene Flame
Investigation of stability, dispersion, and thermal conductivity of functionalized multi-walled carbon nanotube based nanofluid
Removal of anionic surfactant sodium dodecylbenzenesulfonate from water using fly ash adsorbent
Performance modelling and validation on co-gasification of coal and sawdust pellet in research-scale downdraft reactor
Low energy solution ball milling of graphene nanoplatelets (GNPs) reinforced aluminium nanocomposites and its mechanical properties
Conversion of glycerol to polyglycerol over waste duck-bones as a catalyst in solvent free etherification process
Recent advancement of hybrid materials used in chemical enhanced oil recovery (CEOR): A review
Establishing the Level of BIM implementation – A Case Study in Melaka, Malaysia
Investigation of choline based ionic liquids as an oil spill dispersant
Fractionation of oleochemical fatty acid using vacuum dividing wall column: A controllability analysis
Modeling of CO2-MEA absorption system in the packed column using Sulzer DX structured packing
Challenges of implementing green procurement in public construction projects in Malaysia
Formation of NaY zeolite membrane: influence of intermediate layer and its characterization
Dynamic simulation and control of feed conditioning system for CO2 capture
Case Study of sewerage pipe installation using Pipe Jacking and Micro-tunnelling Boring Machine (MTBM) in Ipoh
Influence of Heat Treatment on the Corrosion of Carbon Steel in Environment Containing Carbon Dioxide and Acetic Acid
Mechanical and electrical properties of low density polyethylene filled with carbon nanotubes
A study on blowdown of pressurized vessel containing CO2/N2/H2S at cryogenic conditions
In-plane shear strength analysis of Basalt Fiber-Reinforced Epoxy Laminates with Biowaste Catalyst Free Carbon
Geopolymer concrete for structural use: Recent findings and limitations
The effects of temperature, residence time and particle size on a charcoal produced from coconut shell
Temperature control of vacuum dividing wall column – case study on oleochemical fatty acid fractionation
Synthesis and characterization of MSU-2 synthesized by using tetraethylorthosilicate and Triton X-100
Development of dead-end system calculation model for water reticulation design using Microsoft Excel with optimized algorithm: a case study at regional operations center (ROC) Melaka, Malaysia
Comparison of Buffer Effect of Different Acids During Sandstone Acidizing
Investigating the effect of silver nanoparticles on carbon dioxide hydrates formation
Monolayer grafting of APTES modified graphene oxide on silica coated magnetite: Synthesis, characterization and application in heavy oil removal
Effect of reaction time and microwave power on coil temperature during microwave-metal interaction pyrolysis of plastics
Photocatalytic water splitting over titania supported copper and nickel oxide in photoelectrochemical cell; optimization of photoconversion efficiency
System identification based proxy modeling of a reservoir under iWAG
A computation ANN model for quantifying the global solar radiation: A case study of Al-Aqabah-Jordan
A Numerical Investigation of Low-Salinity Waterflooding Capability to Enhanced Oil Recovery
Effect of The natural Green Materials on Methane Hydrate Formation Kinetics
Monitoring strain development of soil slope using distributed optical fibre sensor
Thermokinetics of SO3H-functionalized dicationic ionic liquids: Effect of anions
Wear Detection of Drill Bit by Image-based Technique
Characterisation of oil palm trunk and frond as fuel for biomass thermochemical
Flatwise Compressive Properties of Kenaf/Polypropylene Honeycomb Core
Assessment of patterned membrane in a tilted panel filtration system for fouling control in activated sludge filtration
Urethane based nanocomposite coated proppants for improved crush resistance during hydraulic fracturing
Zeolitic Imidazolate Framework-8 Membrane for H2/CO2 Separation: Experimental and Modeling
A Review of Oil Palm Fruit Ripeness Monitoring Using Microwave Techniques in Malaysia
Synthesis and Enhancement of Thermal Conductivity of Surfactant Free MWCNTs-Jatropha Oil-based Nanofluid
Zeolite NaY Synthesis by using Sodium Silicate and Colloidal Silica as Silica Source
Investigation on the effect of THF on Nitrogen Hydrate formation under isobaric condition
Adsorption of Lead ions onto Activated Carbon derived from Sugarcane bagasse
Comparison of various advanced oxidation processes used in remediation of industrial wastewater laden with recalcitrant pollutants
New Acid Combination for a Successful Sandstone Acidizing
Effect of [emim][BF4] ionic liquid concentration on ionic liquid-polymeric membrane (ILPM) for CO2/CH4 separation
Start-up of simultaneous nitrification, anammox and denitrification-sequential batch reactor (SNAD-SBR) for treating anaerobic palm oil mill (POME) Digester Effluent
Investigation of Boron addition and compaction pressure on the compactibility, densification and microhardness of 316L Stainless Steel
Effect of pH on ionic liquid mediated synthesis of gold nanoparticle using elaiseguineensis (palm oil) kernel extract
Investigating the effects of rock porosity and permeability on the performance of nitrogen injection into a southern Iranian oil reservoirs through neural network
Experimental study on the effect of varying syngas composition on the emissions of dual fuel CI engine operating at various engine speeds
Analysis of Manning’s and Drag Coefficients for Flexible Submerged Vegetation
Thermal performance of alumina filler reinforced intumescent fire retardant coating for structural application
Study on the effect of ultrasonic wave amplitude on de-emulsification of crude oil to enhance production process
Performance Experimental Study on Stepped Type Basin Solar Still To Produce Salt and Fresh Water
Optimization of bone drilling parameters using Taguchi method based on finite element analysis
The Effect of Concentration Staging on Performance of Produced Water treatment using Forward Osmosis
Cultivation of microalgae in fluidized bed bioreactor: impacts of light intensity and CO2 concentration
Formation of pure NaX zeolite: Effect of ageing and hydrothermal synthesis parameters
Quality planning in Construction Project
Two-Stages Carbon Emission Pinch Analysis for Integrated System of Renewable Energy and Electric Vehicle
CO2 removal via promoted potassium carbonate with glycine: solubility measurement at elevated pressure
Humic acid batteries derived from vermicomposts at different C/N ratios
CFD simulations of convective heat transfer in actively heated tube bundle
Strain and temperature calibration of Brillouin Optical Time Domain Analysis (BOTDA) sensing system
Performance investigation of a waste heat driven pressurized adsorption refrigeration cycle
Evaluation of Electromagnetic Near-Field Measurement Technique as Non-Destructive Testing for Composite Structures
A Feature Extraction Technique Based on Factor Analysis for Pulsed Eddy Current Defects Categorization
Investigation of mechanical field weakening of axial flux permanent magnet motor
Aromatic Polyamines Covalent Triazine Polymer as Sorbent for CO2Adsorption
The use of an improved technique to reduce the variability of output voltage in real-time Fibre Bragg Grating based monitoring system
Density Measurement of Aqueous solution of Tetrapropylammonium Hydroxide at different Temperatures and Concentrations: Data and Correlation
Study on the Effect of Diamond Grain Size on Wear of Polycrystalline Diamond Compact Cutter
Decontamination of benzene from aqueous solution by green functionalization of activated carbon
Iridium Oxide pH Sensor Based on Stainless Steel Wire for pH Mapping on Metal Surface
Investigation of Changing Pore Topology and Porosity During Matrix Acidizing using Different Chelating Agents
Effect of solvents on the morphology and performance of Polyethersulfone (PES) polymeric membranes material for CO2/CH4 separation
Influence of flow limiter and grain shape factor of sand particles on erosion activity in pipeline
Experimental and Numerical Assessment on S-shaped Diffuser performance with different Turbulence Intensity
Real-time monitoring system of composite aircraft wings utilizing Fibre Bragg Grating sensor
Phase identification of natural gas system with high CO2 content through simulation approach using Peng-Robinson model
Advanced Aeration Using Finned Panel Spacer For Fouling Control In Produced Water Membrane Filtration
An investigation of membership functions on performance of ANFIS for solving classification problems
Investigation of Plastering Effect in Casing-while-Drilling – A CFD Study
Catalytic transfer hydrogenation of castor oil using glycerolbased reaction
Effect of Mineral Filler type on Strength of Roller Compacted Rubbercrete for Pavement Applications
Concatenation of carbonaceous nanofillers for mixed matrix membrane development
Effect of processing parameters on the shrinkage behaviour of injection moulded polypropylene gear
Investigating the Effectiveness of Emulsified Acid on Sandstone Formation under High Temperature Conditions
Thermogravimetric kinetics of catalytic and non-catalytic pyrolytic conversion of palm kernel shell with acid treated coal bottom ash
Rheological Behaviour of Water-in-Light Crude Oil Emulsion
Numerical modelling of multi-pass solar dryer filled with granite pebbles for thermal storage enhancement
Classification of waxy crude oil odor-profile using gas sensor array
Hydrogen production via thermocatalytic decomposition of methane over Ni-Cu-Pd/Al2O3 catalysts
Effects of nano-sized boron nitride (BN) reinforcement in expandable graphite based in-tumescent fire retardant coating
Investigate a Gas Well Performance Using Nodal Analysis
Study of pyrolysed acid and based treated coconut coir as green photocatalyst substrate
Two-Phase Oil-Water Empirical Correlation Models for SCAL and Petrophysical Properties in Intermediate Wet Sandstone Reservoirs
Performance studies on co-gasification between coal/sawdust and coal/wood pellet using RSM
Influence of non-covalently functionalized graphene nanoplatelets on viscosity and wettability for improved oil mobility at reservoir conditions
Parameter optimization and stretch enhancement of AISI 316 sheet using rapid prototyping technique
Silicanizing Process On Mild Steel Substrate by Using Tronoh Silica Sand: Microstructure, composition and coating growth
Syngas production via dry reforming of methane over Nibased catalysts
Validation of Analytical Damping Ratio by Fatigue Stress Limit
Cuttings-liquid frictional pressure loss model for horizontal narrow annular flow with rotating drillpipe
Evaluation and optimization of the coagulation-flocculation process using conventional rice starch in potable water treatment
Effect of Coolant Temperature and Stirring Rate in the Separation of Oil from Bilge Water using a Stirred Freeze Crystallizer
Effects of Waste Denim Fibre (WDF) on the physical and rheological properties of bitumen
Formulation of geopolymer cement using mixture of slag and class f fly ash for oil well cementing
A Preliminary Experimental Investigation of Wet Fine Erosion in Two-Phase Flow
Hydraulic flow units for reservoir characterization: A successful application on arab-d carbonate
Optimization of nano-silica in enhancing the properties of synthetic based drilling fluids for tight gas reservoir conditions
Comparison of Energy Absorption of Aluminium-composite Tubes Subjected to Axial Loading
Development of Fibre Bragg grating (FBG) dynamic pressure transducer with diminutive voltage inconsistency
Toxicity prediction of ionic liquids based on Daphnia magna by using density functional theory
Performance of CO2 enrich CNG in direct injection engine
Modeling of diesel/CNG mixing in a pre-injection chamber
Synergistic effect of binary fillers (MCM-41/C20) hybrid membrane for CO2/CH4 separation
Optimization of Laminated Composites Characteristics via integration of Chamis Equation, Taguchi method and Principal Component Analysis
Optimization of multiple quality characteristics for injection moulded polyamide helical gear via integration of Taguchi method and Grey relational analysis
Performance investigation of the S-Rotors
An Effective Acid Combination for Enhanced Properties and Corrosion Control of Acidizing Sandstone Formation
Application of Electrolyte Based Model on Ionic Liquids-Methane Hydrates Phase Boundary
Enhancement of CO2 permeation properties of polymeric membrane by incorporating metal organic framework
Comparison of rheological properties of graphene / carbon nanotube hydrogenated oil based biodegradable drilling fluid
The integration of elastic wave properties and machine learning for the distribution of petrophysical properties in reservoir modeling
Predictive simulation of single cylinder n-butanol HCCI engine
Removal of ammonia by palm oil clinker (POC) as submerged fixed media in sequence batch reactor (SBR) mode
Performance and energy saving analysis of a refrigerator using hydrocarbon mixture (HC-R134a) as working fluid
Remediation on underground water pollution using Fenton Oxidation Method
Semi-clathratic impact of tetrabutylammonium hydroxide on the carbon dioxide hydrates
Physicochemical and FTIR Study of Diesel-Hydrogen Peroxide Fuel Blend
Behaviour of kenaf fibre reinforced composite
Sequential optimization of a water-based polygeneration system in ethylene glycol production
Geometric Optimization of Thermo-electric Coolers Using Simulated Annealing
Numerical Investigation of Liquid Carryover in T-Junction with Different Diameter Ratios
Graphene nanoplatelets as high-performance filtration control material in water-based drilling fluids
Design and development of split-parallel through-the road retrofit hybrid electric vehicle with in-wheel motors
Design and Performance of 20 Watts Portable Solar Generator
Effect of Casing Imperfection on the Casing Strength in Steam Injection Wells
Review on the application of distributed optical fibre sensing in slope monitoring
The effects of Concentration and Salinity on Polymer Adsorption Isotherm at Sandstone Rock Surface
Effect of basalt fibres reinforcement and aluminum trihydrate on the thermal properties of intumescent fire retardant coatings
Corrosion of aluminium in water-in-diesel-emulsion fuel
Thermal properties of cool asphalt concrete containing phase change material
Fabrication of 6FDA-based composite membranes loaded with MIL-125 (Ti) for CO2/CH4 separation
An optimization framework for sandstone acidizing using design of experiment (DOE) and mathematical modelling
Optimization of Progressive Freeze Concentration on Apple Juice via Response Surface Methodology
Investigation on Simultaneous Effects of Shot Peen and Austenitizing Time and Temperature on Grain Size and Microstructure of Austenitic Manganese Steel (Hadfield)
Development of mixed matrix membrane comprising titanium (IV) oxide dispersed with octaisobutyl polyhedral oligomeric silsesquioxane
Effect of Solvent Vapor Treatment on Electrospun Nylon 6,6 Nanofiber Membrane
Study on humic acid derived from EFB based vermicompost as biopesticide
Controlling corrosion rate of Magnesium alloy using powder mixed electrical discharge machining
Fabrication of 6FDA-durene membrane incorporated with zeolite T and aminosilane grafted zeolite T for CO2/CH4 separation
PID multivariable tuning system using BLT method for distillation column
Application of Electromagnetic Induction Technique to Measure the Void Fraction in Oil/Gas Two Phase Flow
Retention of Bioactive Compound in the Concentration of Centella Asiatica Extract through Progressive Freezing
Homogenization Effect on Nanostructure and Conductivity of Polyaniline Nanofibre Synthesis by Mini-Emulsion Polymerization Technique
Adaptive PLS inferential soft sensor for continuous online estimation of NOx emission in industrial water-tube boiler
Water quality monitoring along Kinta River in peninsular Malaysia
Evolution of geopolymer binders: a review
Modified SPC for short run test and measurement process in multi-stations
Numerical analysis of cocurrent conical and cylindrical axial cyclone separators
Characteristic of Fatty Acids Biotransform from Hermetia Illucens Prepupae Fed with Various Organic Wastes Before Conversion to Methyl Ester Form
Conversion of CO2 to Methanol via photo catalysis routes over nickel-loaded CdS under visible light irradiation
Analytical hierarchy process application of body in white modular sub-assembly for automotive manufacturing in Malaysia – A case study
Sensitivity analysis of xylose production process using aspen plus
Intelligent classification of waxy crude oil odor-profile at different temperature
Finite element analysis of residual stress in cold expanded plate with different thickness and expansion ratio
Kinetics of Mixed Amino Acid and Ionic Liquid on CO2 Hydrate Formation
Effect of phase advance on the brushless dc motor torque speed respond
Impact of the electric compressor for automotive air conditioning system on fuel consumption and performance analysis
The prospect and challenges of renewable hydrogen production in Iraq
The Effect of Acidic Gases and Thermodynamic Inhibitors on the Hydrates Phase Boundary of Synthetic Malaysia Natural Gas
Kinetics of heavy metal removal in a suspended and immobilized bioreactors
A two pressure-velocity approach for immersed boundary methods in three dimensional incompressible flows
Comparison of Two-Phase Pipe Flow in OpenFOAM with a Mechanistic Model
Potential of range extender electric vehicles (REEVS)
Computation of vertical bearing capacity factor Nc of strip footing by FEM
PI/NCC Carbon Membrane: Effect of Additives loading Towards Hydrogen Separation
Latest trends in Syngas production employing compound catalysts for methane dry reforming
Defect Detection of Fiberglass Composite Laminates (FGCL) with Ultrasonic A-Scan Signal Measurement
Assessment of heat pumping technology in oleochemical fatty acid fractionation
On Heat Transfer Analysis for a Sphere of Combustible Material of Variable Thermal Conductivity
Monitoring subsurface ground movement using fibre optic inclinometer sensor
IAM: An Intuitive ANFIS-based method for stiction detection
Finned spacer panel system for fouling control in Chlorella vulgaris harvesting
Performance ofElaeis GuineensisLeaves Compost in Filter Media for Stormwater Treament Through Column Study
Adsorption Isotherm of Chromium (Vi) into Zncl2Impregnated Activated Carbon Derived by Jatropha Curcas Seed Hull
Optimization of fractional freezing process for bioethanol purification
Numerical simulation of rock cutting using 2D AUTODYN
Study on the effect of ZIF-8 nanoparticles on the transport behavior of CH4 and CO2 gases in polysulfone membrane
A review of ultra-high temperature materials for thermal protection system
Purification of Carbon Nanotubes Synthesized by Catalytic Decomposition of Methane using Bimetallic Fe-Co Catalysts Supported on MgO
Empirical Relationship between Relative Electrical Conductivity and Relative Density of the Al-Foam Fabricated through Pressure Assisted Sintering/Dissolution Process
Temperature Dependences on Various Types of Photovoltaic (PV) Panel
Theoretical Study of New Combined Absorption-Ejector Refrigeration System
Modified ISR hyper-heuristic for tuning automatic genetic clustering chromosome size
Analysis of Mobile Robot Indoor Mapping using GMapping Based SLAM with Different Parameter
Effect of heat treatment on mechanical properties and microstructure of selective laser melting 316L stainless steel
Optimization of Recycled Glass Fibre-Reinforced Plastics Gear via Integration of the Taguchi Method and Grey Relational Analysis
Vermicomposting of palm oil empty fruit bunch (EFB) based fertilizer with various organics additives
Microstructure and Nanoindentation Characterization of Low Temperature Hybrid Treated layer on Austenitic Stainless Steel
Investigation of gap losses in a modified compound parabolic concentrating collector with evacuated tube receiver
Effect of CO2 Concentration and Liquid to Gas Ratio on CO2 Absorption from Simulated Biogas Using Monoethanolamine Solution
Study of progressive freeze concentration and eutectic freeze crystallization technique for salt recovery
Experimental Equipment Validation for Methane (CH4) and Carbon Dioxide (CO2) Hydrates
Identification of corrosion product on medium carbon steel under the exposure of Banda Aceh’s atmosphere
Early Shear Failure Prediction in Incremental Sheet Forming Process Using FEM and ANN
A Comparative Study of Different Acids used for Sandstone Acid Stimulation: A Literature Review
Modeling the photocatalytic degradation of 1,2-Dihydroxybenzene using Multilayer Perceptron Neural Networks
Effect of bath temperature on sodium diethyldithiocarbamate trihydrate loading of halloysite nanotube
Integrated Mitigation Strategy Model for Carbon Accounting and Sustainability Index to Encounter Palm Oil Mill Weaknesses Holistically
Study of heat transfer due to turbulent flow of nanofluids through rib-groove channel
Sustainability assessment of levulinic acid and succinic acid production from empty fruit bunch
Development of a Solar Assisted Drying System Using Double-Pass Solar Collector with Finned Absorber
The impact of electron beam irradiation on Low density polyethylene and Ethylene vinyl acetate
Communication, coordination and cooperation in construction projects: business environment and human behaviours
Effect of Stirring Rate and Freezing Time on the Percentage of Recovery of Residual Oil from Palm Oil Mill Effluent via a Stirred Freeze Crystallizer
Preparation of Highly Hydrophobic PVDF-HFP Membrane with Anti-Wettability Characteristic
Chemical reactor inherent safety index at preliminary design stage
Hierarchical Self Organizing Map for Novelty Detection using Mobile Robot with Robust Sensor
Synthesis of Amino-Impregnated ZIF-8 for CO2 Adsorption
Cogging force investigation of a free piston permanent magnet linear generator
Molecular simulation and mathematical modelling of glass transition temperature depression induced by CO2 plasticization in Polysulfone membranes
Fabrication and analysis of HNBR-Silica / Carbon Phenolic ablative composites as an effective thermal protection system (TPS)
Study of Solar Driven Silica gel-Water based Adsorption Chiller
Air co-gasification of palm kernel shell and polystyrene: Effect of different polystyrene content
Effects of Na: Al and water: solid ratios on the mechanical properties of fly ash based geopolymer
Development of temperature-insensitive fibre bragg grating pressure transducer
An In-Depth Review on Direct Additive Manufacturing of Metals
Deployment of an FMEA-Integrated Framework to Improve Operational Performance in Semiconductor Manufacturing: A Case Study
Distillation column inherent safety index at preliminary design stage
Evaluation of Tetraethylammonium Chloride on Methane Gas Hydrate Phase Conditions
The combustion behavior of diesel/CNG mixtures in a constant volume combustion chamber
An Investigation on The Effect of Silica Nanoparticle Concentration on Oil-based Mud Rheology and Fluid Loss Control Characteristic
An investigation of thermal stability and heat capacity of imidazolium based ionic liquids at elevated temperature
Synthesis and characterization of ionic liquid polymer composite with zeolite and its application for carbon dioxide capture
Utilizing Lipid-extracted Microalgae Residue for Removal of Methylene Blue from Aqueous Solution
Characterization of Chicken Manure from Manjung Region
Restoration of pretreated palm oil mill effluent using TiO2 based photocatalytic system: An optimization study
Syngas production through steam and CO2 reforming of methane over Ni-based catalyst-A Review
Preparation and physicochemical properties of zeolitic imidazolate framework-8 (ZIF-8)/rice husk derived graphene (GRHA) nanohybrid composites
Bit selection using field drilling data and mathematical investigation
Effect of the Density and the Refractive Index on the Toxicity of Imidazolium Ionic Liquids: A study of Ionic Interactions
Effective Safety Management in Construction Project
Optimization of PID controller tuning parameters for multivariable system using Duelist algorithm
Corrosion of Carbon Steel in Hybrid N-Methyl-2-Pyrrolidone - Monoethanolamine Solutions for Carbon Dioxide Absorption Unit Application
Estimation of safe environmental concentrations of ionic liquids towards bacteria by chemical toxicity distribution method
IOP Conference Series: Materials Science and Engineering
Co-gasification of coal and empty fruit bunch in an entrained flow gasifier: A process simulation study
Perceived Risk towards Mobile Banking: A case study of Malaysia Young Adulthood
The effect of zeolite suspension concentration on the formation of seed layer via vacuum seeding prior to NaX zeolite membranes growth
Optimisation of nano-silica modified self-compacting high-Volume fly ash mortar
Synthesis and Characterization of MSU-2 for CO2Adsorption
Evaluation on the Presence of Nano Silver Particle in Improving a Conventional Water-based Drilling Fluid
Effect of wear on the burst strength of l-80 steel casing
Anaerobic co-digestion for oily-biological sludge with sugarcane bagasse for biogas production under mesophilic condition
Effects Of Welding On The Fatigue Behaviour Of Commercial Aluminum AA-1100 Joints
Effects of Different Activating Agent on the Physicochemical Properties of Rice Husk Derived Graphene (GRHA)
Synthesis of high-porosity hybrid geopolymer/alginate adsorbent for effective removal of methylene blue and optimization of parameters using RSM
A review of walking energy harvesting using piezoelectric materials
Elucidating the non-linear effect of process parameters on hydrogen production by catalytic methane reforming: an artificial intelligence approach
Numerical analyses for improved hydrodynamics of deep water torpedo anchor