Journal
Information Content Entity
Continuant
Entity
Periodical
Generically Dependent Continuant
Collection
RDF description of Results in Engineering - http://gateway.utp.edu.my/vivo/individual/n816
Machine learning prediction of permeability distribution in the X field Malay Basin using elastic properties
Cost-effective synthesis of vanadium carbide MXene from recycled waste precursors for phase change material applications in heat sink cooling
Electromagnetic nanoparticle-assisted oil recovery: Numerical simulation and practical implications
A systematic review of multimodal fake news detection on social media using deep learning models
Numerical modelling of flow characteristics over sharp crested triangular hump
Optimized model involving forward and inverse problem formulation for the assessment of environmentally sustainable transportation alternatives based on intuitionistic linguistic weighted average
Exploring the thermal properties of biodiesel after purification via solvent-aided crystallization
Automated monitoring innovations for efficient and safe construction practices
An assessment of the processing parameters and application of fibre-reinforced polymers (FRPs) in the petroleum and natural gas industries: A review
Experimental investigation on tool pin profile for defect-free multi-layered laminates using friction stir additive manufacturing
A holistic review of nanomaterials in strain-hardening cementitious composites: Insights into micro- and macromechanical, deformation, smart, and durability properties
Elman and cascade neural networks with conjugate gradient Polak-Ribière restarts to predict diesel engine performance and emissions fueled by butanol as sustainable biofuel
Photocatalytic mineralization of diisopropanolamine (DIPA) from natural gas industry wastewater under visible light irradiation: Response surface optimization of synthesis parameters
Optimization DC-DC boost converter of BLDC motor drive by solar panel using PID and firefly algorithm
Design of sub-6 GHz BPF using chained even and odd mode admittance polynomials for 5G C-band applications
Effect of waste-fed black soldier fly larvae oil-based biodiesel towards diesel engine fuel delivery metal corrosion and elastomer degradation
Digitalization in malaysian construction industry: Awareness, challenges and opportunities
Improved prediction accuracy of biomass heating value using proximate analysis with various ANN training algorithms
Benchmarking the impact of nickel filler addition, weld hardness, environmental pH, and corrosion inhibitors on A333 carbon steel pipe weld corrosion
Smart grid stability prediction using Adaptive Aquila Optimizer and ensemble stacked BiLSTM
Maximizing waste plastic oil yield and enhancing energy and environmental metrics through pyrolysis process optimization and fuel modification
Molecular simulation and ANN modelling for Cadmium (Cd) and Lead (Pb) adsorption from water using zeolites
The effect of gas void on restart pressure of waxy crude oil in pipeline
The future of solar-driven interfacial steam generation for sustainable water desalination: Drivers, challenges, and opportunities-review
Thermal management strategies for lithium-ion batteries in electric vehicles: A comprehensive review of nanofluid-based battery thermal management systems
Enhancing heat transfer in compound twisted square ducts using shortened twisted tape inserts
Review on multi-functional performance analysis of MXene for thermoelectricity and electromagnetic interference shielding: challenges and future perspectives
Biodiesel for HCCI engine: Prospects and challenges of sustainability biodiesel for energy transition
Corrosion of copper exposed to water-in biodiesel-diesel emulsion fuel stabilized with polyglycerol polyricinoleate emulsifier
Towards industrial revolution (IR) 4.0 in the construction industry: Readiness of contractors
Deep deterministic policy gradient - model-agnostic meta-learning framework: Efficient adaptation in continuous control tasks
A decision-making framework for prioritizing reconstruction projects in post-disaster recovery
Mixed matrix membranes incorporated with small pore zeolite UZM-5 for enhanced CO2/CH4 separation
Response surface methodology (RSM) for optimizing engine performance and emissions fueled with biofuel: Review of RSM for sustainability energy transition
Applications of wide bandgap semiconductors in electric traction drives: Current trends and future perspectives
An experimental study to control sand production in weakly consolidated sandstone formations: A chemical approach on formation strength
Evaluation of antifoaming behaviour of polysiloxane mixed with fluoroalkyl as antifoam in degraded amine solution
Energy, environmental, and economic benefits of hydrogen-enriched biofuel using ammonium hydroxide in reactivity-controlled compression ignition engines
Insights into modern machine learning approaches for bearing fault classification: A systematic literature review
Advancements in electrochemical energy storage: A review of biomass-derived separator, binder and electrolyte for electric vehicle battery
Impact response of filament-wound structure with polymeric liner: Experimental and numerical investigation (Part-A)
HalalChain: A decentralized blockchain model for enhanced data integrity, real-time compliance, and automated verification in halal food supply chain
Phase Stability and Solidification of 9Cr-ODS Alloys for Wire Additive Manufacturing: A Computational Approach
Stress concentration factors in CFRP-reinforced KT-joints under multiplanar bending loads: experimental and numerical investigation
A new performance assessment method for photovoltaic module enhancing techniques based on power and cost effectiveness factor
Design and testing of a test rig for tubular joints hot-spot stress determination
Enhancing the efficiency of air bubbles using a finned panel spacer for membrane fouling control in activated sludge filtration
A computational fluid dynamics (CFD) study on extraction of geothermal energy in Bangladesh
Empirical modelling of filtration performance for the fibrous air filters with final resistance recommendation
Hazard risks pertaining to partially submerged non-stationary vehicle on low-lying roadways under subcritical flows
Effect of palm oil biodiesel blends (B10 and B20) on physical and mechanical properties of nitrile rubber elastomer
Nanofluid heat transfer and machine learning: Insightful review of machine learning for nanofluid heat transfer enhancement in porous media and heat exchangers as sustainable and renewable energy solutions
Influence of natural fiber rope wrapping techniques on the compressive response of recycled aggregate concrete circular columns
RuO2−MXene nanocomposite coated on bio-degradable loofah sponge for enhanced rate of evaporation in interfacial solar desalination
Machine learning application for prediction of sonic wave transit time - A case of Niger Delta basin
A comprehensive review of Computational Fluid Dynamics (CFD) modelling of membrane gas separation process
Analysis of the mechanical properties of the single layered braid reinforced thermoplastic pipe (BRTP) for oil & gas industries
An atomistical elucidation of the 6FDA-durene-based mixed matrix membrane and ionic liquid mixed matrix membrane for CO2/CH4 separation
Corrigendum to exploring the thermal properties of biodiesel after purification via solvent-aided crystallization [Results in Engineering 22 (2024) 102343]
The role of advanced machine learning in COVID-19 medical imaging: A technical review
Impediments in BIM implementation for the risk management of tall buildings
An embedded KPI-based advisory framework for monitoring and diagnosis of soft sensor degradation
A survey-based approach of framework development for improving the application of internet of things in the construction industry of Malaysia
Estimating petrophysical properties using Geostatistical inversion and data-driven extreme gradient boosting: A case study of late Eocene McKee formation, Taranaki Basin, New Zealand
Deep eutectic solvents for pretreatment of lignocellulosic biomass: Towards circular bioeconomy
Cell disruption and extraction for microalgae biorefinery: Focus on deep eutectic solvents moving towards aqueous biphasic system
Investigating surface integrity, corrosion resistance and biocompatibility of 316L steel using carbon nanotube-assisted EDM process
Selective acid gas separation from diatomic nonmetal gas via ZIF-8 membrane: Taguchi analysis and neural network modeling
An end-to-end deep learning framework for structural damage assessment using semantic segmentation and point cloud analysis
Data augmentation using SMOTE technique: Application for prediction of burst pressure of hydrocarbons pipeline using supervised machine learning models
Influence of winding angles on hoop stress in composite pressure vessels: Finite element analysis
Explicit and explainable artificial intelligent model for prediction of CO2 molecular diffusion coefficient in heavy crude oils and bitumen
Improving biodiesel oxidative stability using antioxidants: An insight into the research trends and future prospects from a bibliometric approach
Super low profile 5G mmWave highly isolated MIMO antenna with 360∘ pattern diversity for smart city IoT and vehicular communication
P-DETR: A transformer-based algorithm for pipeline structure detection
A review on life cycle assessment of different pipeline materials
Techno-economic assessment of cryogenic Rotating Packed Beds for nitrogen removal from natural gas
Machine learning based compact MIMO antenna array for 38 GHz millimeter wave application with robust isolation and high efficiency performance
Hybrid intelligence for enhanced fault detection and diagnosis for industrial gas turbine engine
MADM-based network selection and handover management in heterogeneous network: A comprehensive comparative analysis
An experimental study and ANN analysis of utilizing ammonia as a hydrogen carrier by real-time emulsion fuel injection to promote cleaner combustion
MXene-based materials for electromagnetic interference shielding: Fundamentals, mechanisms, and emerging applications
Influence of synthesis approach and formulation on the physicochemical properties of chitin and chitosan from Black Soldier Fly
Numerical investigation on the thermal performance of perforated and non-perforated twisted fins at different twisting angles
Advancing waste-based construction materials through carbon dioxide curing: A comprehensive review
The investigation of lecithin and cocamide DEA Biosurfactant concentrations on emulsified biodiesel fuel stability, properties, and the micro-explosion phenomenon
2D/2D Hybrids: Re-visiting interfacial synthesis and charge-carrier dynamics for photocatalysis
Enhancing oxidative stability of biodiesel using fruit peel waste extracts blend: Comparison of predictive modelling via RSM and ANN techniques
Effect of polyvinyl alcohol fiber on the mechanical properties and embodied carbon of engineered cementitious composites
Is a fan coil unit (FCU) an efficient cooling system for net-zero energy buildings (NZEBs) in tropical regions? An experimental study on thermal comfort and energy performance of an FCU
Modelling of carbon dioxide absorption in hollow fiber membrane contactor for different flow configurations
Effects of cooling and interval cleaning on the performance of soiled photovoltaic panels in Muscat, Oman