Journal
type: Class

Information Content Entity
type: Class

Continuant
type: Class

Entity
type: Class

Periodical
type: Class

Generically Dependent Continuant
type: Class

Collection
type: Class

RDF description of Materials - http://gateway.utp.edu.my/vivo/individual/n8137
type: Document
rights: termsOfUse
date: 2026-04-27T22:32:06
publisher: vivo

Materials
type: Periodical
publication venue for: Degradation Monitoring of HDPE Material in CO2-Saturated NaCl Environment through Electrochemical Impedance Spectroscopy Technique
publication venue for: Acid and Sulphate Attacks on a Rubberized Engineered Cementitious Composite Containing Graphene Oxide
publication venue for: Experimental Investigation on Ambient-Cured One-Part Alkali-Activated Binders Using Combined High-Calcium Fly Ash (HCFA) and Ground Granulated Blast Furnace Slag (GGBS)
publication venue for: Effects of Ionic Liquid, 1-Ethyl-3-methylimidazolium Chloride ([EMIM]Cl), on the Material and Electrical Characteristics of Asphaltene Thin Films
publication venue for: Optimization of Washing Processes in Solvothermal Synthesis of Nickel-Based MOF-74
publication venue for: Artificial Neural Network (ANN) and Finite Element (FEM) Models for GFRP-Reinforced Concrete Columns under Axial Compression
publication venue for: Modelling and Optimization for Mortar Compressive Strength Incorporating Heat-Treated Fly Oil Shale Ash as an Effective Supplementary Cementitious Material Using Response Surface Methodology
publication venue for: Development and Investigation of an Inexpensive Low Frequency Vibration Platform for Enhancing the Performance of Electrical Discharge Machining Process
publication venue for: Thermal Kinetics of Monocationic and Dicationic Pyrrolidinium-Based Ionic Liquids
publication venue for: Effect of Biodegradable Binder Properties and Operating Conditions on Growth of Urea Particles in a Fluidized Bed Granulator
publication venue for: Flexural Behavior of Double-Skin Steel Tube Beams Filled with Fiber-Reinforced Cementitious Composite and Strengthened with CFRP Sheets
publication venue for: Analytical Method for the Optimization of the Open-Hole and Filled-Hole Laminates at the Preliminary Design Stage
publication venue for: Mechanical and Thermal Properties of Synthetic Polypropylene Fiber–Reinforced Renewable Oil Palm Shell Lightweight Concrete
publication venue for: Preparation of Carbon Nanotubes/Alumina Hybrid-Filled Phenolic Composite with Enhanced Wear Resistance
publication venue for: Cementitious Grouts for Semi-Flexible Pavement Surfaces—A Review
publication venue for: Bond Relationship of Carbon Fiber-Reinforced Polymer (CFRP) Strengthened Steel Plates Exposed to Service Temperature
publication venue for: The Impact of 3D Prism Cavity for Enhanced Oil Recovery Using Different Nanomaterials
publication venue for: Effect of Irradiated and Non-Irradiated Waste PET Based Cementitious Grouts on Flexural Strength of Semi-Flexible Pavement
publication venue for: The Effect of Welding Current and Electrode Force on the Heat Input, Weld Diameter, and Physical and Mechanical Properties of SS316L/Ti6Al4V Dissimilar Resistance Spot Welding with Aluminum Interlayer
publication venue for: The Effect of Residual Solvent in Carbon−Based Filler Reinforced Polymer Coating on the Curing Properties, Mechanical and Corrosive Behaviour
publication venue for: Optimization of CO2 Sorption onto Spent Shale with Diethylenetriamine (DETA) and Ethylenediamine (EDA)
publication venue for: A Review on Recycling of Carbon Fibres: Methods to Reinforce and Expected Fibre Composite Degradations
publication venue for: Investigating the Effects of Fiber Reinforced Concrete on the Performance of End-Zone of Pre-Stressed Beams
publication venue for: Fire-Exposed Fly-Ash-Based Geopolymer Concrete: Effects of Burning Temperature on Mechanical and Microstructural Properties
publication venue for: Raytracing Modelling of Infrared Light Management Using Molybdenum Disulfide (MoS2) as a Back-Reflector Layer in a Silicon Heterojunction Solar Cell (SHJ)
publication venue for: Enhancement of Viscoelastic and Electrical Properties of Magnetorheological Elastomers with Nanosized Ni-Mg Cobalt-Ferrites as Fillers
publication venue for: Effect of Elevated Temperature on the Compressive Strength and Durability Properties of Crumb Rubber Engineered Cementitious Composite
publication venue for: Assessments of Process Parameters on Cutting Force and Surface Roughness during Drilling of AA7075/TiB2 In Situ Composite
publication venue for: Produced Water Treatment with Conventional Adsorbents and MOF as an Alternative: A Review
publication venue for: A Systematic Literature Review on Waste-to-Resource Potential of Palm Oil Clinker for Sustainable Engineering and Environmental Applications
publication venue for: An Influence of Oxygen Flow Rate and Spray Distance on the Porosity of HVOF Coating and Its Effects on Corrosion—A Review
publication venue for: Erosion–Corrosion of 30°, 60°, and 90° Carbon Steel Elbows in a Multiphase Flow Containing Sand Particles
publication venue for: A New 3D Mathematical Model for Simulating Nanofluid Flooding in a Porous Medium for Enhanced Oil Recovery
publication venue for: Study on Structural Performance of Asphalt Concrete and Hot Rolled Sheet Through Viscoelastic Characterization
publication venue for: Thermal Expansion of 3C-SiC Obtained from In-Situ X-ray Diffraction at High Temperature and First-Principal Calculations
publication venue for: Statistical Simulation of the Switching Mechanism in ZnO-Based RRAM Devices
publication venue for: Effect of Sand Fines Concentration on the Erosion-Corrosion Mechanism of Carbon Steel 90° Elbow Pipe in Slug Flow
publication venue for: Utilization of Crumb Rubber and High-Volume Fly Ash in Concrete for Environmental Sustainability: RSM-Based Modeling and Optimization
publication venue for: An Exploratory Study on Resistance Spot Welding of Titanium Alloy Ti-6Al-4V
publication venue for: Investigation of the Impact of Graphene Nanoplatelets (GnP) on the Bond Stress of High-Performance Concrete Using Pullout Testing
issn: 1996-1944
publication venue for: Curve Fitting for Damage Evolution through Regression Analysis for the Kachanov–Rabotnov Model to the Norton–Bailey Creep Law of SS-316 Material
publication venue for: Strengthening the Structural Behavior of Web Openings in RC Deep Beam Using CFRP
publication venue for: Systematic Performance Comparison of Fe3+/Fe0/Peroxymonosulfate and Fe3+/Fe0/Peroxydisulfate Systems for Organics Removal
publication venue for: Microstructural Characterization of Fibric Peat Stabilized with Portland Cement and Silica Fume
publication venue for: On the Role of Processing Parameters in Producing Recycled Aluminum AA6061 Based Metal Matrix Composite (MMC-AlR) Prepared Using Hot Press Forging (HPF) Process
publication venue for: Study and Use of Rice Husk Ash as a Source of Aluminosilicate in Refractory Coating
publication venue for: A Highly Sensitive Room Temperature CO2 Gas Sensor Based on SnO2-rGO Hybrid Composite
type: Entity
publication venue for: Properties of Rubberized Engineered Cementitious Composites Containing Nano-Silica
publication venue for: Effects of Graphene Oxide and Crumb Rubber on the Fresh Properties of Self-Compacting Engineered Cementitious Composite Using Response Surface Methodology
publication venue for: Outdoor Performance Analysis of a Photovoltaic Thermal (PVT) Collector with Jet Impingement and Compound Parabolic Concentrator (CPC)
publication venue for: Rheological Performance of Magnetorheological Grease with Embedded Graphite Additives
publication venue for: Influence of Elbow Angle on Erosion-Corrosion of 1018 Steel for Gas–Liquid–Solid Three Phase Flow
publication venue for: Wear Analysis of NiTi Sand Screens Using Altair Discrete Element Method
publication venue for: Conjectured the Behaviour of a Recycled Metal Matrix Composite (MMC–AlR) Developed through Hot Press Forging by Means of 3D FEM Simulation
publication venue for: Process Optimization of In Situ Magnetic-Anisotropy Spark Plasma Sintering of M-Type-Based Barium Hexaferrite BaFe12O19
publication venue for: Multiresponse Optimization and Environmental Analysis in Direct Recycling Hot Press Forging of Aluminum AA6061
publication venue for: Mechanical Properties of Crumb Rubber Mortar Containing Nano-Silica Using Response Surface Methodology
publication venue for: Determination of Non-Recrystallization Temperature for Niobium Microalloyed Steel
type: Thing
type: Generically Dependent Continuant
publication venue for: Deformation Properties of Rubberized ECC Incorporating Nano Graphene Using Response Surface Methodology
publication venue for: Pseudo-Ductility, Morphology and Fractography Resulting from the Synergistic Effect of CaCO3 and Bentonite in HDPE Polymer Nano Composite
publication venue for: Investigation of Fibers Reinforced Engineered Cementitious Composites Properties Using Quartz Powder
publication venue for: Finite Element Analysis of Steel Plates with Rectangular Openings Subjected to Axial Stress
publication venue for: Methane and Carbon Dioxide Hydrate Formation in the Presence of Metal-Based Fluid
publication venue for: Artificial Neural Network-Based Failure Pressure Prediction of API 5L X80 Pipeline with Circumferentially Aligned Interacting Corrosion Defects Subjected to Combined Loadings
publisher: MDPI AG
publication venue for: Thin-Walled Cylindrical Shell Storage Tank under Blast Impacts: Finite Element Analysis
publication venue for: Mechanical Performance and Corrosion Behaviour of Diffusion-Bonded A5083 Aluminium and A36 Mild Steel with Gallium Interlayer
publication venue for: Investigation of Coatings, Corrosion and Wear Characteristics of Machined Biomaterials through Hydroxyapatite Mixed-EDM Process: A Review
type: Journal
most specific type: Journal
publication venue for: Modeling, Optimization and Performance Evaluation of TiC/Graphite Reinforced Al 7075 Hybrid Composites Using Response Surface Methodology
publication venue for: Effects of Modified Metakaolin Using Nano-Silica on the Mechanical Properties and Durability of Concrete
type: Continuant
publication venue for: Long-Term Strength Development of Fly Ash-Based One-Part Alkali-Activated Binders

Degradation Monitoring of HDPE Material in CO2-Saturated NaCl Environment through Electrochemical Impedance Spectroscopy Technique
type: Entity
type: Information Content Entity
type: AcademicArticle
type: Continuant
type: Thing
has publication venue: Materials
type: Generically Dependent Continuant
type: Article
type: Document

Acid and Sulphate Attacks on a Rubberized Engineered Cementitious Composite Containing Graphene Oxide
type: Entity
type: Thing
type: Information Content Entity
type: AcademicArticle
type: Generically Dependent Continuant
type: Document
has publication venue: Materials
type: Continuant
type: Article

Experimental Investigation on Ambient-Cured One-Part Alkali-Activated Binders Using Combined High-Calcium Fly Ash (HCFA) and Ground Granulated Blast Furnace Slag (GGBS)
type: Information Content Entity
type: Article
type: Continuant
type: Entity
type: Document
has publication venue: Materials
type: Generically Dependent Continuant
type: Thing
type: AcademicArticle

Effects of Ionic Liquid, 1-Ethyl-3-methylimidazolium Chloride ([EMIM]Cl), on the Material and Electrical Characteristics of Asphaltene Thin Films
type: Document
type: Thing
type: Information Content Entity
type: Continuant
type: AcademicArticle
type: Generically Dependent Continuant
type: Article
has publication venue: Materials
type: Entity

Optimization of Washing Processes in Solvothermal Synthesis of Nickel-Based MOF-74
type: AcademicArticle
type: Thing
type: Generically Dependent Continuant
type: Information Content Entity
type: Article
has publication venue: Materials
type: Entity
type: Continuant
type: Document

Artificial Neural Network (ANN) and Finite Element (FEM) Models for GFRP-Reinforced Concrete Columns under Axial Compression
type: Information Content Entity
type: Thing
type: Article
type: Entity
type: Continuant
has publication venue: Materials
type: AcademicArticle
type: Document
type: Generically Dependent Continuant

Modelling and Optimization for Mortar Compressive Strength Incorporating Heat-Treated Fly Oil Shale Ash as an Effective Supplementary Cementitious Material Using Response Surface Methodology
type: AcademicArticle
type: Information Content Entity
type: Generically Dependent Continuant
type: Thing
type: Entity
type: Continuant
type: Document
type: Article
has publication venue: Materials

Development and Investigation of an Inexpensive Low Frequency Vibration Platform for Enhancing the Performance of Electrical Discharge Machining Process
type: Document
type: Thing
type: AcademicArticle
has publication venue: Materials
type: Continuant
type: Article
type: Entity
type: Generically Dependent Continuant
type: Information Content Entity

Thermal Kinetics of Monocationic and Dicationic Pyrrolidinium-Based Ionic Liquids
type: Thing
type: Generically Dependent Continuant
type: Entity
has publication venue: Materials
type: Information Content Entity
type: Article
type: Document
type: AcademicArticle
type: Continuant

Effect of Biodegradable Binder Properties and Operating Conditions on Growth of Urea Particles in a Fluidized Bed Granulator
type: Article
type: Information Content Entity
type: Continuant
type: Generically Dependent Continuant
type: Thing
type: AcademicArticle
type: Entity
type: Document
has publication venue: Materials

Flexural Behavior of Double-Skin Steel Tube Beams Filled with Fiber-Reinforced Cementitious Composite and Strengthened with CFRP Sheets
type: Information Content Entity
type: AcademicArticle
type: Document
type: Article
type: Thing
type: Generically Dependent Continuant
type: Entity
has publication venue: Materials
type: Continuant

Analytical Method for the Optimization of the Open-Hole and Filled-Hole Laminates at the Preliminary Design Stage
type: Document
type: Article
type: Information Content Entity
type: AcademicArticle
has publication venue: Materials
type: Thing
type: Generically Dependent Continuant
type: Continuant
type: Entity

Mechanical and Thermal Properties of Synthetic Polypropylene Fiber–Reinforced Renewable Oil Palm Shell Lightweight Concrete
type: Article
has publication venue: Materials
type: Document
type: Generically Dependent Continuant
type: Continuant
type: Entity
type: AcademicArticle
type: Information Content Entity
type: Thing

Preparation of Carbon Nanotubes/Alumina Hybrid-Filled Phenolic Composite with Enhanced Wear Resistance
type: Continuant
has publication venue: Materials
type: Article
type: Thing
type: Generically Dependent Continuant
type: Entity
type: AcademicArticle
type: Document
type: Information Content Entity

Cementitious Grouts for Semi-Flexible Pavement Surfaces—A Review
type: Document
has publication venue: Materials
type: Entity
type: AcademicArticle
type: Continuant
type: Generically Dependent Continuant
type: Information Content Entity
type: Thing
type: Article

Bond Relationship of Carbon Fiber-Reinforced Polymer (CFRP) Strengthened Steel Plates Exposed to Service Temperature
type: Continuant
type: Thing
type: Article
type: Entity
type: AcademicArticle
type: Generically Dependent Continuant
type: Document
type: Information Content Entity
has publication venue: Materials

The Impact of 3D Prism Cavity for Enhanced Oil Recovery Using Different Nanomaterials
type: Thing
type: Continuant
type: Article
type: Information Content Entity
type: AcademicArticle
has publication venue: Materials
type: Document
type: Entity
type: Generically Dependent Continuant

Effect of Irradiated and Non-Irradiated Waste PET Based Cementitious Grouts on Flexural Strength of Semi-Flexible Pavement
type: Generically Dependent Continuant
type: Entity
type: AcademicArticle
type: Information Content Entity
type: Article
type: Continuant
type: Thing
has publication venue: Materials
type: Document

The Effect of Welding Current and Electrode Force on the Heat Input, Weld Diameter, and Physical and Mechanical Properties of SS316L/Ti6Al4V Dissimilar Resistance Spot Welding with Aluminum Interlayer
type: Thing
has publication venue: Materials
type: Document
type: Entity
type: Continuant
type: AcademicArticle
type: Information Content Entity
type: Article
type: Generically Dependent Continuant

The Effect of Residual Solvent in Carbon−Based Filler Reinforced Polymer Coating on the Curing Properties, Mechanical and Corrosive Behaviour
type: Entity
type: Article
type: Document
type: Continuant
type: AcademicArticle
has publication venue: Materials
type: Generically Dependent Continuant
type: Thing
type: Information Content Entity

Optimization of CO2 Sorption onto Spent Shale with Diethylenetriamine (DETA) and Ethylenediamine (EDA)
type: Document
type: Article
has publication venue: Materials
type: Continuant
type: Information Content Entity
type: AcademicArticle
type: Entity
type: Generically Dependent Continuant
type: Thing

A Review on Recycling of Carbon Fibres: Methods to Reinforce and Expected Fibre Composite Degradations
type: Information Content Entity
has publication venue: Materials
type: Document
type: Thing
type: Article
type: Entity
type: Continuant
type: Generically Dependent Continuant
type: AcademicArticle

Investigating the Effects of Fiber Reinforced Concrete on the Performance of End-Zone of Pre-Stressed Beams
type: Information Content Entity
type: Article
type: Generically Dependent Continuant
type: Continuant
type: Document
type: Thing
has publication venue: Materials
type: AcademicArticle
type: Entity

Fire-Exposed Fly-Ash-Based Geopolymer Concrete: Effects of Burning Temperature on Mechanical and Microstructural Properties
type: Continuant
type: Thing
type: Information Content Entity
type: Generically Dependent Continuant
type: Article
has publication venue: Materials
type: Entity
type: Document
type: AcademicArticle

Raytracing Modelling of Infrared Light Management Using Molybdenum Disulfide (MoS2) as a Back-Reflector Layer in a Silicon Heterojunction Solar Cell (SHJ)
type: AcademicArticle
type: Thing
type: Article
type: Document
type: Continuant
type: Entity
type: Generically Dependent Continuant
type: Information Content Entity
has publication venue: Materials

Enhancement of Viscoelastic and Electrical Properties of Magnetorheological Elastomers with Nanosized Ni-Mg Cobalt-Ferrites as Fillers
type: Document
type: AcademicArticle
type: Entity
type: Thing
type: Article
type: Information Content Entity
has publication venue: Materials
type: Generically Dependent Continuant
type: Continuant

Effect of Elevated Temperature on the Compressive Strength and Durability Properties of Crumb Rubber Engineered Cementitious Composite
type: Article
type: Information Content Entity
type: Entity
type: AcademicArticle
type: Generically Dependent Continuant
type: Continuant
type: Document
has publication venue: Materials
type: Thing

Assessments of Process Parameters on Cutting Force and Surface Roughness during Drilling of AA7075/TiB2 In Situ Composite
type: AcademicArticle
has publication venue: Materials
type: Thing
type: Continuant
type: Information Content Entity
type: Document
type: Article
type: Entity
type: Generically Dependent Continuant

Produced Water Treatment with Conventional Adsorbents and MOF as an Alternative: A Review
type: Article
type: Generically Dependent Continuant
type: Thing
type: AcademicArticle
has publication venue: Materials
type: Continuant
type: Entity
type: Document
type: Information Content Entity

A Systematic Literature Review on Waste-to-Resource Potential of Palm Oil Clinker for Sustainable Engineering and Environmental Applications
type: Entity
type: AcademicArticle
type: Generically Dependent Continuant
type: Article
has publication venue: Materials
type: Document
type: Thing
type: Continuant
type: Information Content Entity

An Influence of Oxygen Flow Rate and Spray Distance on the Porosity of HVOF Coating and Its Effects on Corrosion—A Review
type: Article
type: Thing
type: Entity
type: Information Content Entity
type: AcademicArticle
type: Continuant
type: Generically Dependent Continuant
has publication venue: Materials
type: Document

Erosion–Corrosion of 30°, 60°, and 90° Carbon Steel Elbows in a Multiphase Flow Containing Sand Particles
type: Article
type: Generically Dependent Continuant
type: Thing
type: Continuant
has publication venue: Materials
type: Entity
type: Information Content Entity
type: AcademicArticle
type: Document

A New 3D Mathematical Model for Simulating Nanofluid Flooding in a Porous Medium for Enhanced Oil Recovery
type: AcademicArticle
type: Document
type: Entity
has publication venue: Materials
type: Continuant
type: Thing
type: Article
type: Generically Dependent Continuant
type: Information Content Entity

Study on Structural Performance of Asphalt Concrete and Hot Rolled Sheet Through Viscoelastic Characterization
type: AcademicArticle
type: Continuant
type: Information Content Entity
type: Thing
has publication venue: Materials
type: Document
type: Generically Dependent Continuant
type: Entity
type: Article

Thermal Expansion of 3C-SiC Obtained from In-Situ X-ray Diffraction at High Temperature and First-Principal Calculations
type: Generically Dependent Continuant
has publication venue: Materials
type: Continuant
type: Thing
type: Information Content Entity
type: Entity
type: AcademicArticle
type: Document
type: Article

Statistical Simulation of the Switching Mechanism in ZnO-Based RRAM Devices
type: Continuant
type: Document
type: Information Content Entity
type: Entity
type: Thing
has publication venue: Materials
type: Article
type: AcademicArticle
type: Generically Dependent Continuant

Effect of Sand Fines Concentration on the Erosion-Corrosion Mechanism of Carbon Steel 90° Elbow Pipe in Slug Flow
type: Continuant
type: Article
type: Entity
type: Document
type: Information Content Entity
has publication venue: Materials
type: Generically Dependent Continuant
type: AcademicArticle
type: Thing

Utilization of Crumb Rubber and High-Volume Fly Ash in Concrete for Environmental Sustainability: RSM-Based Modeling and Optimization
type: Generically Dependent Continuant
type: Information Content Entity
has publication venue: Materials
type: Entity
type: Continuant
type: AcademicArticle
type: Thing
type: Document
type: Article

An Exploratory Study on Resistance Spot Welding of Titanium Alloy Ti-6Al-4V
type: Document
type: Article
type: Generically Dependent Continuant
type: Entity
type: Continuant
type: Information Content Entity
type: Thing
type: AcademicArticle
has publication venue: Materials

Investigation of the Impact of Graphene Nanoplatelets (GnP) on the Bond Stress of High-Performance Concrete Using Pullout Testing
type: Entity
type: Article
has publication venue: Materials
type: Generically Dependent Continuant
type: Thing
type: Document
type: Continuant
type: AcademicArticle
type: Information Content Entity

Curve Fitting for Damage Evolution through Regression Analysis for the Kachanov–Rabotnov Model to the Norton–Bailey Creep Law of SS-316 Material
type: AcademicArticle
type: Information Content Entity
type: Document
type: Continuant
type: Generically Dependent Continuant
type: Thing
has publication venue: Materials
type: Entity
type: Article

Strengthening the Structural Behavior of Web Openings in RC Deep Beam Using CFRP
type: Continuant
type: Information Content Entity
type: Entity
type: Thing
type: AcademicArticle
has publication venue: Materials
type: Generically Dependent Continuant
type: Document
type: Article

Systematic Performance Comparison of Fe3+/Fe0/Peroxymonosulfate and Fe3+/Fe0/Peroxydisulfate Systems for Organics Removal
type: Article
type: AcademicArticle
type: Generically Dependent Continuant
type: Document
type: Thing
type: Entity
has publication venue: Materials
type: Continuant
type: Information Content Entity

Microstructural Characterization of Fibric Peat Stabilized with Portland Cement and Silica Fume
type: Document
type: Thing
has publication venue: Materials
type: Continuant
type: Information Content Entity
type: Entity
type: AcademicArticle
type: Article
type: Generically Dependent Continuant

On the Role of Processing Parameters in Producing Recycled Aluminum AA6061 Based Metal Matrix Composite (MMC-AlR) Prepared Using Hot Press Forging (HPF) Process
type: Document
type: Information Content Entity
has publication venue: Materials
type: Thing
type: Generically Dependent Continuant
type: Entity
type: Article
type: Continuant
type: AcademicArticle

Study and Use of Rice Husk Ash as a Source of Aluminosilicate in Refractory Coating
type: Generically Dependent Continuant
type: AcademicArticle
has publication venue: Materials
type: Thing
type: Article
type: Continuant
type: Entity
type: Information Content Entity
type: Document

A Highly Sensitive Room Temperature CO2 Gas Sensor Based on SnO2-rGO Hybrid Composite
type: Information Content Entity
has publication venue: Materials
type: Generically Dependent Continuant
type: Entity
type: Document
type: Article
type: AcademicArticle
type: Continuant
type: Thing

Properties of Rubberized Engineered Cementitious Composites Containing Nano-Silica
type: Continuant
type: AcademicArticle
type: Information Content Entity
has publication venue: Materials
type: Generically Dependent Continuant
type: Article
type: Entity
type: Thing
type: Document

Effects of Graphene Oxide and Crumb Rubber on the Fresh Properties of Self-Compacting Engineered Cementitious Composite Using Response Surface Methodology
type: Document
type: AcademicArticle
type: Entity
type: Continuant
type: Thing
type: Article
type: Generically Dependent Continuant
has publication venue: Materials
type: Information Content Entity

Outdoor Performance Analysis of a Photovoltaic Thermal (PVT) Collector with Jet Impingement and Compound Parabolic Concentrator (CPC)
type: Article
type: Thing
type: Information Content Entity
type: Continuant
type: Document
type: Generically Dependent Continuant
has publication venue: Materials
type: AcademicArticle
type: Entity

Rheological Performance of Magnetorheological Grease with Embedded Graphite Additives
type: AcademicArticle
type: Continuant
type: Entity
type: Article
type: Document
has publication venue: Materials
type: Thing
type: Information Content Entity
type: Generically Dependent Continuant

Influence of Elbow Angle on Erosion-Corrosion of 1018 Steel for Gas–Liquid–Solid Three Phase Flow
type: Thing
type: Generically Dependent Continuant
type: Information Content Entity
type: Article
has publication venue: Materials
type: Document
type: Continuant
type: Entity
type: AcademicArticle

Wear Analysis of NiTi Sand Screens Using Altair Discrete Element Method
type: Entity
type: Document
type: Continuant
type: Generically Dependent Continuant
type: Article
type: Thing
type: Information Content Entity
type: AcademicArticle
has publication venue: Materials

Conjectured the Behaviour of a Recycled Metal Matrix Composite (MMC–AlR) Developed through Hot Press Forging by Means of 3D FEM Simulation
type: Thing
type: Information Content Entity
type: Document
type: Generically Dependent Continuant
type: Entity
type: Article
type: Continuant
type: AcademicArticle
has publication venue: Materials

Process Optimization of In Situ Magnetic-Anisotropy Spark Plasma Sintering of M-Type-Based Barium Hexaferrite BaFe12O19
type: Thing
type: Generically Dependent Continuant
type: Information Content Entity
type: Document
has publication venue: Materials
type: Entity
type: Continuant
type: AcademicArticle
type: Article

Multiresponse Optimization and Environmental Analysis in Direct Recycling Hot Press Forging of Aluminum AA6061
type: Continuant
type: Information Content Entity
type: Article
type: Thing
has publication venue: Materials
type: AcademicArticle
type: Generically Dependent Continuant
type: Entity
type: Document

Mechanical Properties of Crumb Rubber Mortar Containing Nano-Silica Using Response Surface Methodology
type: Entity
type: Information Content Entity
has publication venue: Materials
type: Continuant
type: Document
type: Article
type: Generically Dependent Continuant
type: AcademicArticle
type: Thing

Determination of Non-Recrystallization Temperature for Niobium Microalloyed Steel
type: Article
has publication venue: Materials
type: Continuant
type: Entity
type: AcademicArticle
type: Document
type: Information Content Entity
type: Generically Dependent Continuant
type: Thing

Deformation Properties of Rubberized ECC Incorporating Nano Graphene Using Response Surface Methodology
type: AcademicArticle
has publication venue: Materials
type: Thing
type: Information Content Entity
type: Generically Dependent Continuant
type: Entity
type: Document
type: Continuant
type: Article

Pseudo-Ductility, Morphology and Fractography Resulting from the Synergistic Effect of CaCO3 and Bentonite in HDPE Polymer Nano Composite
type: AcademicArticle
type: Article
type: Document
type: Generically Dependent Continuant
type: Entity
type: Information Content Entity
has publication venue: Materials
type: Continuant
type: Thing

Investigation of Fibers Reinforced Engineered Cementitious Composites Properties Using Quartz Powder
type: Document
type: Information Content Entity
type: Article
has publication venue: Materials
type: Thing
type: AcademicArticle
type: Continuant
type: Entity
type: Generically Dependent Continuant

Finite Element Analysis of Steel Plates with Rectangular Openings Subjected to Axial Stress
type: Generically Dependent Continuant
has publication venue: Materials
type: Information Content Entity
type: Entity
type: Article
type: Document
type: Thing
type: Continuant
type: AcademicArticle

Methane and Carbon Dioxide Hydrate Formation in the Presence of Metal-Based Fluid
type: Thing
type: Article
has publication venue: Materials
type: Document
type: Continuant
type: AcademicArticle
type: Information Content Entity
type: Generically Dependent Continuant
type: Entity

Artificial Neural Network-Based Failure Pressure Prediction of API 5L X80 Pipeline with Circumferentially Aligned Interacting Corrosion Defects Subjected to Combined Loadings
type: AcademicArticle
type: Document
type: Generically Dependent Continuant
has publication venue: Materials
type: Continuant
type: Entity
type: Information Content Entity
type: Article
type: Thing

MDPI AG
type: Agent
type: Publisher
type: Entity
type: BFO_0000004
type: Continuant
type: Organization
type: Thing
publisher of: Materials

Thin-Walled Cylindrical Shell Storage Tank under Blast Impacts: Finite Element Analysis
type: Article
has publication venue: Materials
type: Continuant
type: Thing
type: AcademicArticle
type: Information Content Entity
type: Generically Dependent Continuant
type: Document
type: Entity

Mechanical Performance and Corrosion Behaviour of Diffusion-Bonded A5083 Aluminium and A36 Mild Steel with Gallium Interlayer
type: Information Content Entity
type: Generically Dependent Continuant
has publication venue: Materials
type: Continuant
type: Entity
type: AcademicArticle
type: Document
type: Article
type: Thing

Investigation of Coatings, Corrosion and Wear Characteristics of Machined Biomaterials through Hydroxyapatite Mixed-EDM Process: A Review
type: Generically Dependent Continuant
type: AcademicArticle
has publication venue: Materials
type: Entity
type: Continuant
type: Thing
type: Information Content Entity
type: Document
type: Article

Modeling, Optimization and Performance Evaluation of TiC/Graphite Reinforced Al 7075 Hybrid Composites Using Response Surface Methodology
type: AcademicArticle
type: Continuant
type: Information Content Entity
type: Document
type: Article
has publication venue: Materials
type: Generically Dependent Continuant
type: Thing
type: Entity

Effects of Modified Metakaolin Using Nano-Silica on the Mechanical Properties and Durability of Concrete
type: Article
has publication venue: Materials
type: Document
type: Continuant
type: Entity
type: Generically Dependent Continuant
type: Thing
type: Information Content Entity
type: AcademicArticle

Long-Term Strength Development of Fly Ash-Based One-Part Alkali-Activated Binders
type: Thing
type: Entity
type: AcademicArticle
type: Information Content Entity
has publication venue: Materials
type: Generically Dependent Continuant
type: Continuant
type: Document
type: Article

Hot Press as a Sustainable Direct Recycling Technique of Aluminium: Mechanical Properties and Surface Integrity
type: Generically Dependent Continuant
has publication venue: Materials
type: Information Content Entity
type: Thing
type: Continuant
type: Article
type: Entity
type: AcademicArticle
type: Document

Advancements in Polyethylene Oxide (PEO)–Active Filler Composite Polymer Electrolytes for Lithium-Ion Batteries: A Comprehensive Review and Prospects
type: Generically Dependent Continuant
type: Continuant
type: Thing
has publication venue: Materials
type: Information Content Entity
type: Entity
type: Article
type: Document
type: AcademicArticle

Effect of Unit Cell Type and Pore Size on Porosity and Mechanical Behavior of Additively Manufactured Ti6Al4V Scaffolds
type: Article
type: Thing
type: Information Content Entity
type: AcademicArticle
type: Entity
has publication venue: Materials
type: Generically Dependent Continuant
type: Continuant
type: Document

Synthesis, Surface Nitriding and Characterization of Ti-Nb Modified 316L Stainless Steel Alloy Using Powder Metallurgy
type: Thing
type: Entity
type: Continuant
type: Article
has publication venue: Materials
type: Document
type: AcademicArticle
type: Information Content Entity
type: Generically Dependent Continuant

Mechanical, Microstructural and Drying Shrinkage Properties of NaOH-Pretreated Crumb Rubber Concrete: RSM-Based Modeling and Optimization
type: Continuant
type: AcademicArticle
type: Entity
type: Article
type: Document
type: Generically Dependent Continuant
type: Thing
has publication venue: Materials
type: Information Content Entity

Compression after Impact Behaviour and Failure Analysis of Nanosilica-Toughened Thin Epoxy/GFRP Composite Laminates
type: AcademicArticle
type: Information Content Entity
type: Entity
type: Document
type: Thing
type: Continuant
has publication venue: Materials
type: Generically Dependent Continuant
type: Article

Activation of Rubber-Seed Shell Waste by Malic Acid as Potential CO2 Removal: Isotherm and Kinetics Studies
type: Generically Dependent Continuant
type: AcademicArticle
type: Document
type: Thing
type: Entity
type: Article
type: Continuant
has publication venue: Materials
type: Information Content Entity

Effect of Crumb Rubber, Fly Ash, and Nanosilica on the Properties of Self-Compacting Concrete Using Response Surface Methodology
type: Document
type: Article
type: AcademicArticle
type: Generically Dependent Continuant
type: Entity
type: Continuant
type: Thing
has publication venue: Materials
type: Information Content Entity

Optimization of Cement-Based Mortar Containing Oily Sludge Ash by Response Surface Methodology
type: Entity
has publication venue: Materials
type: Document
type: Information Content Entity
type: Article
type: Generically Dependent Continuant
type: Thing
type: Continuant
type: AcademicArticle

A Review of Finite Element Analysis and Artificial Neural Networks as Failure Pressure Prediction Tools for Corroded Pipelines
type: Thing
has publication venue: Materials
type: Article
type: Document
type: Continuant
type: Information Content Entity
type: Entity
type: Generically Dependent Continuant
type: AcademicArticle

Sustainable Aluminosilicate Coatings from Palm Oil Waste for Enhanced Thermal and Microstructure Properties
type: Thing
type: Continuant
type: Information Content Entity
has publication venue: Materials
type: Generically Dependent Continuant
type: Document
type: Article
type: AcademicArticle
type: Entity

Axial Compressive Strength Models of Eccentrically-Loaded Rectangular Reinforced Concrete Columns Confined with FRP
type: Document
has publication venue: Materials
type: Article
type: Thing
type: Generically Dependent Continuant
type: Information Content Entity
type: AcademicArticle
type: Continuant
type: Entity

Temperature Dependent on Mechanical and Rheological Properties of EPDM-Based Magnetorheological Elastomers Using Silica Nanoparticles
type: Article
has publication venue: Materials
type: Generically Dependent Continuant
type: Entity
type: Document
type: AcademicArticle
type: Thing
type: Continuant
type: Information Content Entity

Effects of Petroleum-Based Oils as Dispersing Aids on Physicochemical Characteristics of Magnetorheological Elastomers
type: Continuant
type: Generically Dependent Continuant
type: Thing
has publication venue: Materials
type: AcademicArticle
type: Document
type: Information Content Entity
type: Article
type: Entity

Investigation on Hamburg Wheel-Tracking Device Stripping Performance Properties of Recycled Hot-Mix Asphalt Mixtures
type: Document
type: Continuant
type: Article
type: AcademicArticle
type: Generically Dependent Continuant
type: Entity
type: Information Content Entity
has publication venue: Materials
type: Thing

Influence of secondary reinforcement on behaviour of corbels with various types of high-performance fiber-reinforced cementitious composites
type: Article
type: Continuant
type: Generically Dependent Continuant
type: Thing
type: AcademicArticle
type: Entity
type: Document
has publication venue: Materials
type: Information Content Entity

Microstructure and Mechanical Properties of Modified 316L Stainless Steel Alloy for Biomedical Applications Using Powder Metallurgy
type: AcademicArticle
has publication venue: Materials
type: Thing
type: Continuant
type: Generically Dependent Continuant
type: Information Content Entity
type: Document
type: Article
type: Entity

The Implementation of Industrial Byproduct in Malaysian Peat Improvement: A Sustainable Soil Stabilization Approach
type: Document
has publication venue: Materials
type: Information Content Entity
type: Article
type: Continuant
type: AcademicArticle
type: Thing
type: Generically Dependent Continuant
type: Entity

Torrefaction of Napier Grass and Oil Palm Petiole Waste Using Drop-Type Fixed-Bed Pyrolysis Reactor
type: Thing
has publication venue: Materials
type: Entity
type: Information Content Entity
type: Continuant
type: Article
type: Document
type: AcademicArticle
type: Generically Dependent Continuant