Journal
Information Content Entity
Continuant
Entity
Periodical
Generically Dependent Continuant
Collection
RDF description of Advanced Materials Research - http://gateway.utp.edu.my/vivo/individual/n4338
Performance of TiO2 Nanoparticles Synthesized at pH 2 as Photoelectrode in Dye Solar Cell
Optimized TiO2 Nanocrystallites Aggregates for Enhanced Efficiency in Dye Solar Cells
Thermal Properties of Multiwalled Carbon Nanotubes-Alumina (MWCNT-Al2O3) Hybrid Filled Silicone Rubber Composites
Surface Integrity and Cutting Temperature in Machining of Biomedical Magnesium Alloys an Overview
A Novel Quantum-Dot Cellular Automata XOR Design
Investigation of Ultrasonic Pretreatment on the Synthesis of Zeolite-T and its CO2 Adsorption Characteristics
Simulation of Hydrodynamics and Reaction Behavior in an Industrial RFCC Riser
Influence of Processing on the Properties of Carbon Nanotubes/Alumina Hybrid Compound Filled PDMS Composites
Corrosion Inhibitor Performance with Presence of FeCO3 Film in CO2 Corrosion Environment under Fluid Flow Effect
Embodied Carbon Potential of Conventional Construction Materials Used in Typical Malaysian Single Storey Low Cost House Using Building Information Modeling (BIM)
Modification of Adsorbents for High CO2 Content Capture from Stranded Natural Gas Reserve: A Critical Review
Finite Element Analysis of Fatigue in Pipelines due to Slug Flow
Kinetics of Thermal Degradation of Ionic Liquid Regenerated Cellulose
Effect of Titanium Oxide on Fire Performance of Intumescent Fire Retardant Coating
Production System Improvement by Integration of FMEA with 5-Whys Analysis
S-Parameters of Bismuth Iron Garnet (BIG) Filled Polyvinylidene Fluoride Composite Using Rectangular Waveguide Method
Solubility Parameters Based on Refractive Index Data of Ionic Liquid
Elucidating Corrosion Performance of Weld in CO2 Corrosion Environment
Design, Modeling and Simulation of CMOS-MEMS Piezoresistive Cantilever Based Carbon Dioxide Gas Sensor for Capnometry
A CMOS MEMS Resonant Magnetic Field Sensor with Differential Electrostatic Actuation and Capacitive Sensing
Smart Energy Saving Classroom System Using Programmable Logic Controller
Basalt Carbon Hybrid Composite for Wind Turbine Rotor Blades: A Short Review
Photocatalytic Degradation of Diisopropanolamine in Heterogeneous Photo-Fenton System
Effect of Metal Doped-TiO2 on the Performance of Dye Solar Cells (DSCs)
Mask Design and Simulation: Computer Aided Design for Lab-on-Chip Application
Physical Absorption of CO2 Capture: A Review
Preparation of Activated Carbon from Durian Shell and Seed
Towards Ultra Thin and High Efficiency ZnxCd1-xS/CdTe Solar Cell by AMPS 1D
Gas Permeation Models in Mixed Matrix Membranes for Gas Separation
Iron Doped TiO2 Photocatalysts for Environmental Applications: Fundamentals and Progress
Void Content Determination of Fiber Reinforced Polymers by Acid Digestion Method
Comparison of Cobalt Based Catalysts Supported on MWCNT and SBA-15 Supporters for Fischer-Tropsch Synthesis by Using Autoclave Type Reactor
Identification of Nonlinear Systems Using Parallel Laguerre-NN Model
Co2 Solubility in Silica Supported [hmim][Tf2N]
Solubility of Carbon Dioxide in Aqueous Solutions of Piperazine (PZ) at Elevated Pressures
Synthesis and Characterization of Polysulfone/Montmorillonite (PSF/MMT) Mixed Matrix Membrane for Gas Separation
Effects of Eccentric Load on Un-Strengthen and CFRP Strengthened RC Beams
Cu-Fe/TiO2 Photocatalyst for Deep Desulfurization Process
Physicochemical Properties of Hydroxyapatite Extracted from Fish Scales
Evaluation of the Physiochemical Properties of Molybdenum Supported Catalysts
Analysis of Electric Double Layer on Thin Film Lubrication with Partial Slip
Assessment of Human Factor Performance Using Bayesian Inference and Inherent Safety
Magnetization of Low Grade Iron Ore Using Empty Fruit Bunch Ash
Efficiency of Visible Light Assisted Fenton Oxidation of Diisopropanolamine (DIPA) of Natural Gas Industry Wastewater
Hydrogen Adsorption Capacity Investigation of Ni-Co-Al Mixed Oxides
Mo/γ-Al2O3-MgO as a Bifunctional Catalyst for Renewable Hydrogen Production from Steam Reforming of Glycerol
Visible-Light Photodegradation of Diisopropanolamine Using Bimetallic Cu-Fe/TiO2 Photocatalyst
Effects of Cutting Parameters on Hole Integrity when Drilling GFRP and HFRP Composites
Carbon Doped Iron Ore Using Palm Kernel Shell
Characteristics of Corrosion Degradation in Carbon Steel Pipelines
Investigation for Optimum Structure of CdS:O/CdTe Solar Cell from Numerical Analysis
Preparation and Characterization of Blended Composite Membranes
Bimetallic Fe-Ni/Zeolite β Catalysts for Hydrogen Generation from Steam Gasification of Palm Kernel Shell
An Electromagnetic Frequency Increased Vibration Energy Harvester
The Effect of Calcinations Temperature on the Performance of TiO2 Aggregates-Based Dye Solar Cells (DSCs)
Synthesis of Nano-Structured Ni-Co-Al Hydrotalcites and Derived Mixed Oxides
A Taguchi-SQP Approach for Minimizing Energy per Unit Diesel Production at Crude Distillation Unit
Char Strength of Wool Fibre Reinforced Epoxy-Based Intumescent Coatings (FRIC)
A Study of Hybrid Optimization of Injection Moulding Process Parameters for Plastic Gear
Nano-Yttrium Aluminium Garnet Interfacial Tension and Viscosity for Enhanced Oil Recovery
Incorporation of Pd Nanoparticles on Rod and Necklace-Like SBA-15 Supports Materials
Dielectric Studies of Proton Conducting Polymer Electrolyte Based on Chitosan/PEO Blend Doped with NH4NO3
Visible Light Photodegradation of Diisopropanolamine Using Cu/TiO2 Photocatalyst: Effect of Metal Loading
Implementation of Autonomous Maintenance in Semiconductor Industry: A Case Study
Benzene and Cyclohexane Separation Using 1-Propanenitrile-3-butylimidazolium Dicyanamide Ionic Liquid
Application of Response Surface Methodology to Investigate CO2 Absorption Column Temperature Rise
Parametric Control of Oxyacetylene Flame Profile
Investigation of Carbon Nanofiber Supported Iron Catalyst Preparation by Deposition Precipitation
Prediction of CO2 Solubility in Aqueous DEA and MDEA Binary Solutions Using O'Connell's Expression
Detailed Analysis of Shallow and Heavily-Doped Emitters for Al-BSF Bifacial Solar Cells
Delineation of Hydrocarbon with Variation of Overburden Thickness for Sea Bed Logging Applications
Electrical Properties of Starch Based Silver Ion Conducting Solid Biopolymer Electrolyte
Density, Viscosity and CO2 Solubility of Novel Solvent
Mask Design and Fabrication of Micro/Nanowire Biochip for Reliable and Repeatability Pattern Transfer
Perspective of Agriculture Wastes Usage as a Resource
Smart and Robust Composite Tube Columns Frames for Offshore Sub-Structure Construction
Preventive Maintenance Checklist towards Effective Maintenance System: A Case Study in Semiconductor Industry
The Application of Aluminum and Hydrochloric Acid to Produce Hydrogen for Internal Combustion Engine via Hydrogen Mixture with Gasoline Based on Specific Fuel Consumption
Role of Debinding to Control Mechanical Properties of Powder Injection Molded 316L Stainless Steel
Rheological Behavior of Carbon Nanotubes / Copper Feedstocks for Metal Injection Molding
Synthesis, Characterization of Phenethyltrimethoxysilane (PE) Modified Organic-Inorganic Hybrid Silicalite-1 Molecular Sieves and its Transformation into Solid Acid Materials
Effect of Ball-Milling Parameter on the Synthesis of MWCNT/Alumina Hybrid Compound
Investigating the Effects of Injection Moulding Process Parameters on Multiple Tensile Characteristics of Plastic Spur Gear via Experimental Approach
Operational Training Management System (OPTRAMS) for Safe Operation in Process Plant
Solar Photocatalytic Degradation of 2,4-Dichlorophenol by TiO2 Nanoparticle Prepared by Sol-Gel Method
Influence of Acid and Thermal Treatments on Properties of Carbon Nanotubes
Experimental Study on Wave Dampening Ability of Floating Breakwaters
Hydrogen Storage Investigation of Fixed Bed of Nanocrystalline Mg-Ni-Cr Mixed Oxides
Study on Synthesis and Characterization of Cu-Ni Doped TiO2 by Sol-Gel Hydrothermal
Chrome Mask Design for Microfluidic Fabrication
A New Design of Variable Traction Tracked System
Adsorptive Removal of Pb(II) Ion from Aqueous Solution Using Rice Husk-Based Activated Carbon
Reliability Programmed Tool and its Application for Fault Tolerance Computation
Synthesis of Co/CNTs via Strong Electrostatic Adsorption: Effect of Metal Loading
Improvement of Hydrophobicity of Urea Modified Tapioca Starch Film with Lignin for Slow Release Fertilizer
Water Absorbency Properties of OPEFB Filled Hydrogels Composites
Characterization of Modified Multiwalled Carbon Nanotubes
Effect of Metakaolin and PVA Fibres on the Workability and Mechanical Properties of Concrete
Effect of Microwave Incinerated Rice Husk Ash (MIRHA) on Workability and Compressive Strength of Concrete
Field Emission Model of CNT Based Ionization Gas Sensor
Corrosion Behavior of X52 Steel in High Pressure CO2 Environment
Effect of Different Qualities of Foam on Fill Particle Transport in Horizontal Well Cleanup Operation Using Coiled Tubing
Solid Supported [hmim][Tf2N] for CO2 Adsorption
Thermal Performance on Unglazed Photovoltaic Thermal Polymer Collector
Transport Properties of Chitosan/Peo Blend Based Proton Conducting Polymer Electrolyte
Recovery of 1-Butyl-3-Methylimidazolium-Based Ionic Liquids
Semi-Quantitative Risk Assessment Matrix for Rotating Equipment
Comparative Study of the Hydrodynamic Performance of Shorter and Longer Blades in a Swirling Fluidized Bed
Preparation and Characterization of Polysulfone Membrane for Gas Separation
Development of a Portable Fingerprint Attendance System for University Student
Size Optimization Using Normalized Radial Basis Function and Bat Algorithm
Modeling of Aircraft Composite Parts Using Simulation
Reinforced Concrete Deep Beams with Openings Strengthened Using FRP – A Review
Evaluation of Aerobic and Anaerobic Co-Digestion of Tetraselmis suecica and Oil Palm Empty Fruit Bunches by Response Surface Methodology
Phase Evolution and Crystallite Size of Ni0.25Zn0.75Fe2O4 at Different Calcination Temperatures
Thermophysical Properties of Ionic Liquid with Thiocyanate Anion: Effect of Cations
Microwave Synthesis of ZnO Nanoparticles for Enhanced Oil Recovery
Estimation of Burst Pressure of Corroded Pipeline Using Finite Element Analysis (FEA)
The Effect of Wollastonite Filler on Thermal Performance of Intumescent Fire Retardant Coating
Effect of Magnesium Coating Prior to Lithium Loading over SBA-15 for Stabilization of its Mesostructure
Morphology Controlled Ionothermal Synthesis and Characterization of Ceria Nanomaterials
Integrating Reliability Analysis in Life Cycle Cost Estimation of Heat Exchanger and Pump
Carbon Dioxide Retention on Bentonite Clay Adsorbents Modified by Mono-, Di- and Triethanolamine Compounds
Effect of Epoxy Binder on Fire Protection and Bonding Strength of Intumescent Fire Protective Coatings for Steel
The Effects of Different Depth of Floor towards Internal Daylighting and Rules of Thumb for Office Room
Flow Behavior in the Resin Infusion of Glass Fiber Reinforced Polymer Wind Turbine Blade
Conduction Mechanism and Dielectric Properties of Solid Biopolymer Electrolyte Incorporated with Silver Nitrate
Evaluation of Inherent Safety Strategies Using FAHP to Reduce Human Error
Experimental Analysis of Petroleum Wax Characteristics for Lubricant Oil Production in Solvent Dewaxing Unit
Simulation of Drill Pipe Lateral Vibration due to Riser's Oscillation
Visible Light Photodegradation of Azo Dye by Cu/TiO2
The Synergistic Effect of Thiourea and Surfactants on Corrosion Inhibition of Stainless Steel-316 in Hydrochloric Acid
Analysis of Two-Layered Film Journal Bearing with Partial Slip Surface
Modeling the Effect of Temperature-Induced Surface Tension Gradient in Coating Processes
Theoretical and Experimental Analysis of Desiccant Wheel Performance for Solar Hybrid Desiccant Air-Conditioning System
Synthesis, Characterization and Activity Pattern of Carbon Nanofibres Based Cu-ZrO2 Catalyst in the Hydrogenation of Carbon Dioxide to Methanol
Modified Polyol-Mediated Synthesis of Doped TiO2 Nanoparticles as the Photoanode in Dye Solar Cells (DSCs)
Characterization of Activated Carbon from Wood Sawdust Prepared via Chemical Activation Using Potassium Hydroxide
Influence of Workpiece Shape on MRR and EWR in EDM of Steel
Mesoporous Tin Phosphate as Anode Material for Lithium-Ion Cells
Effects of Ferrocement in Strengthening the Serviceability Properties of Reinforced Concrete Structures
A Review of Solar Air Heater for Drying of Agricultural Products
Implementation of Decision Tree for Maintenance Policy Decision Making - A Case Study in Semiconductor Industry