Journal
Information Content Entity
Continuant
Entity
Periodical
Generically Dependent Continuant
Collection
RDF description of Materials Today: Proceedings - http://gateway.utp.edu.my/vivo/individual/n111702
Highly flexible and stretchable 3D graphene/MXene composite thin film
Influence of water volume on CO2 hydrate-based desalination of brine solution
Ionic liquid assisted cellulose aerogels for cleaning an oil spill
Development of opposing surface wettability PVDF membrane to improve CO2 capture in membrane gas absorption
Correlation between rate of deposition and temperature of asphaltene particles
Effects of solution concentration on the synthesis of polyvinylidene fluoride (PVDF) electrospun nanofibers
Ash Deposition Characteristics of Industrial Biomass Waste and Agricultural Residues
Performance and Critical Issues of Polymer Liners in Pipeline Industry: A review
“One-pot” synthesis of activated carbon – Graphene oxide polyethyleneimine-functionalized supported copper nanoparticles electrode for carbon dioxide reduction reaction
Effect of fluorosurfactant on alumina membrane for oil and water separation
Specific heat capacity of xanthan gum/PAC polymer-based drilling fluids: An experimental and correlation study
The effect of holding time on dissimilar resistance spot welding of stainless steel 316L and Ti6Al4V titanium alloy with aluminum interlayer
Polymer light emitting diodes (PLEDs): An update review on current innovation and performance of material properties
Imidazolium-based ionic liquids as demulsifier for water-crude oil emulsion
Effect of imidazolium based ionic liquids on PES membrane for CO2/CH4 separation
Physical properties of dihydric Alcohol-based deep eutectic solvent for integrated fuel oil desulfurization
Role of particle size distribution of bridging agent for drilling mud on formation damage near wellbore
Potential application of biomass derived graphene for COVID-19 pandemic
Novel hydrothermal growth of ZnO/NiO hybrids nanostructures on 3D graphene
Characterization stress reactions to stroop color-word test using spectral analysis
Effective treatment of oily sludge for biogas and methane gas production at mesophilic using anaerobic batch reactor (AnBR)
Dispersion of crude oil by choline based ionic liquids
Modification of TiO2/AC catalyst for visible light degradation of ionic liquid contaminated wastewater: Effect of Cu loading on the characterization and efficiency
Fire performance of fly-ash-based geopolymer concrete: Effect of burning temperature on mechanical and microstructural properties
Influence of modification mixing parameters on conventional properties of palm oil clinker fine (POCF)-modified bitumen
Modification of zeolitic imidazolate framework-8 with amine groups for improved antibacterial activity
Lignosulfonate as a retarder in geopolymer cement for oil well cementing: Effect on compressive strength
Arrhenius model for styrene monomer migration from single-use polystyrene cup
Comparative analysis of Basalt/E-Glass/S2-Fibreglass-Carbon fiber reinforced epoxy laminates using finite element method
Influence of aluminum addition on the mechanical properties of brass/Al composites fabricated by stir casting
Development of janus polymer/carbon nanotubes hybrid membrane for oil-water separation
Effect of graphene oxide particle as nanomaterial in the production of engineered cementitious composites including superplasticizer, fly ash, and polyvinyl alcohol fiber
Highly hydrophobic 3D graphene-carbon nanotubes composite film for oil absorption
Stability of primary emulsion assisted with nanoparticle in emulsion liquid membrane process for zinc extraction
A comparison study on the performance between Tetrametylammonium chloride and PolyvinylPyrrolidone as drilling mud additives for gas hydrates
A composite hydrogel beads bio-sorbent for removal of copper: Effect of pH of copper solution
Adsorption of anionic methyl orange dye on hybrid spherical silica in fixed-bed column
Performance Evaluation of Commercial Lost Circulation Materials
Investigation of suitable graphene reinforcements for copper based PIM feedstock
Synthesis and Characterization of Alkylated Graphene Oxide (AGO) and Reduced Graphene Oxide (ARGO)
Allicin incorporation as urease inhibitor in a chitosan/starch based biopolymer for fertilizer application
H-Y zeolite as hydrodeoxygenation catalyst for diesel range hydrocarbon production from rubber seed oil
Investigation on the effects of air gap distance on the formation of cellulose triacetate hollow fiber membrane for CO2 and CH4 gases permeation
Investigation of plasticized ionic conductor based on chitosan and ammonium bromide for EDLC application
Hydrophilic comonomer impact on poly(vinyl alcohol-co-methyl methacrylate) based hydrogel coating
Characterization of BTEX in Malaysian petrol
Preliminary study of natural polymer as kinetic hydrate inhibitor
Investigation on AA7075 and AA7075/SiC surface composites using friction stir processing: An experimental and numerical approach
Oil palm frond for the adsorption of Janus Green dye
Synthesis and evaluation of poly octanediol citrate / nano silica composite
Characterization of Coal Bottom Ash &its Potential to be used as Catalyst in Biomass Gasification
Investigation of dual impact of nanoparticles-ethanol as additive to biodiesel-diesel fuel on an engine using artificial neural network prediction model
Investigate the effect of process parameters of magnetic inductively assisted spark plasma sintering (SPS) of iron oxide (Fe3O4) on microstructure behaviour – Part I
Comparative study of glycerol conversion to polyglycerol via conventional and microwave irradiation reactor
Modification of effective surface area correlation for structured packed absorption column at elevated pressures
Thermodynamic modelling on methane hydrate equilibrium condition in the presence of electrolyte inhibitor
The rheological performance of guar gum and castor oil as additives in water-based drilling fluid
Effect of brine on the kinetics of Carbon dioxide hydrate formation and dissociation in porous media
Intumescent flame retardant coating based graphene oxide and halloysite nanotubes
Burst strength analysis of thin composite pressure vessels
Fabrication and characterization of poly(ether-block-amide) (Pebax-1657) and silicoaluminophosphate (SAPO-34) composite membranes
Modelling on Gas Hydrate Kinetics in Presence of Saline Water in Porous Media
Antimicrobial Activity and Acute Toxicity of Choline Based Ionic Liquid Mixtures
Plant-wide MPC control scheme for CO2 absorption/stripping system
Modelling of polypropylene-based aluminum-air battery
A study on in-cylinder flow characteristics of crank-rocker engine using CFD and PIV
Synergistic effect of basalt fiber on the thermal properties of intumescent fire retardant coating
Effects of temperature and injection rates on the performance of bio-polymer drag reducing agent
Unusual CO2 hydrate formation in porous media: Implications on geo-CO2 storage laboratory testing methods
Optimization of photodegradation of methylene blue over modified TiO2/BiVo4 photocatalysts: effects of total TiO2 loading and different type of co-catalyst
The investigation of microstructure and mechanical properties of resistance spot welded AISI 316L austenitic stainless steel
The effect of sensitization treatment on chloride induced stress corrosion cracking of 304L stainless steel using U-bend test
Fabrication of multilayer composite hollow fiber membrane comprising NH2-MIL-125 (Ti) for CO2 removal from CH4
The influences of additives in M−type (Ba and Sr) hexaferrites’ microstructure, sintering and magnetic properties: A review
Mixed matrix membranes incorporated with zeolite AlPO-18 for CO2/CH4 separation
Residual strength analysis of pipeline with circumferential groove corrosion subjected to internal pressure
Photovoltaic performance of eutectic ionic liquids as potential electrolytes in dye-sensitized solar cells
Physical, rheological and morphological characterization of modified asphalt binder with differing crumb rubber contents
Squeeze Film Analysis of Three-layered Parallel Plate and Partial Journal Bearing Lubricated with Couple Stress Fluids for Skeletal Joint Applications
Influence of NH2-MOF addition into PVDF and estimation of CO2 gas transport through membrane
Selective recovery of Copper from waste mobile phone printed circuit boards using Sulphuric acid leaching
Abundant nipa palm waste as Bio-pellet fuel
Temperature effects on anionic/nonionic surfactant mixture and silica nanofluid dispersion for foam-EOR
Synthesis of small pore zeolite via ultrasonic-assisted hydrothermal synthesis
Evaluation of tetramethylammonium acetate as corrosion suppressor for flow assurance applications
Investigation of boron effect on the densification of Fe-50%Ni soft magnetic alloys produced by powder metallurgy route
Preliminary study on ZIF-8 containing hollow fiber mixed matrix membranes (HFMMMs) for CO2 and CH4 gas permeation
Mechanical and anticorrosive properties of epoxy containing modified graphene Oxide hybrids
Effect of incorporating hydrophilic silica on carbon dioxide volumetric mass transfer coefficient using a fabricated membrane as the diffuser
Facilitated transport graphene oxide based PPOdm mixed matrix membrane for CO2 separation
Inclusion of zeolitic imidazolate framework-8 (ZIF-8) crystals within porous polyether sulfone (PES) via filtration methods as potential electrolytes for DMFC applications
Exploring the role of electron-hole scavengers on optimizing the photocatalytic performance of BiVO4
Adsorptive removal of carbon dioxide gas by TEA-activated biochar prepared using different biomass precursor
Synthesis and characterization of PEBAX 1657 and hierarchical Linde Type-T (h-LTT) zeolite for the fabrication of hybrid membranes
Evaluation and Design Criteria of Photovoltaic Thermal (PV/T)
Sustainable flame retardant coating based graphene oxide and montmorillonite
Benzene exposure among tanker worker during unloading of petrol
Amine-Functionalized Metal Organic Framework (MOF)/6FDA-Durene Composite Membranes for CO2 Removal from CH4
Thermochemical behavior and characterization of palm kernel shell via TGA/DTG technique
Mini-review on fibrous zeolite catalysts for CO2 reforming of methane